Skip to content
PIC Program for 8-band Decode Switch for Portsdown ATV transmitter
Branch: master
Clone or download
Pull request Compare This branch is 1 commit ahead of davecrump:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
8-Band-Decode-Built-V2-small.jpg
8-Band-Test-Rig.jpg
8_Band_Decode.asm
8_Band_Decode.hex
LICENSE
README.md

README.md

8-Band-Decode

8-Band-Decode banner PIC Program for 8-band Decode Switch for Portsdown ATV transmitter

This program is for use on the Portsdown ATV Transmitter 8-band Decode PCB. The PIC used is a 16F883, which provides the 12 logic inputs and 10 logic outputs required (with 2 spares).

8_Band_Decode.asm is the assembler source code for those who are curious or want to make changes.

8_Band_Decode.hex is the compiled file for programming into the 16F883 using the MPLab IDE/IPE or similar and a PICKit 3 PIC programmer.

Note that during programming the PCB must be powered, either from an external source or your PIC programmer, and the DIP switches must be in the off position as they share the programming pins.

Hardware details are on the BATC Wiki here https://wiki.batc.org.uk/8-Band_Decoder.

PCBs will be available from the BATC Shop.

Dave, G8GKQ

You can’t perform that action at this time.