Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
85 lines (61 sloc) 2.86 KB

Migrated from


bbswitch is a kernel module which automatically detects the required ACPI calls for two kinds of Optimus laptops. It has been verified to work with "real" Optimus and "legacy" Optimus laptops (at least, that is how I call them). The machines on which these tests has performed are:

  • Clevo B7130 - GT 425M ("real" Optimus, Lekensteyns laptop)
  • Dell Vostro 3500 - GT 310M ("legacy" Optimus, Samsagax' laptop)

(note: there is no need to add more supported laptops here as the universal calls should work for every laptop model supporting either Optimus calls)

It's preferred over manually hacking with the acpi_call module because it can detect the correct handle preceding _DSM and has some built-in safeguards:

  • You're not allowed to disable a card if a driver (nouveau, nvidia) is loaded.
  • Before suspend, the card is automatically enabled. When resuming, it's disabled again if that was the case before suspending. Hibernation should work, but it not tested.


Build the module (kernel headers are required):


Then load it (requires root privileges, i.e. sudo):

make load

If your card is supported, there should be no error. Otherwise, you get a "No such device" (ENODEV) error. Check your kernel log (dmesg) for more information.

DKMS support

Change #MODULE_VERSION# to the current version of bbswitch. Copy the Makefile, C source and dkms.conf file to /usr/src/bbswitch-VERSION/ (replace VERSION with the current version of bbswitch which has been inserted for #MODULE_VERSION#.


bbswitch has three commands to check the card status and switching (# means "run with root privileges, i.e. run it prefixed with sudo):

Get the status:

# cat /proc/acpi/bbswitch  
0000:01:00.0 ON

Turn the card off, respectively on:

# tee /proc/acpi/bbswitch <<<OFF
# tee /proc/acpi/bbswitch <<<ON

If the card stays on when trying to disable it, you've probably forgotten to unload the driver,

$ dmesg |tail -1
bbswitch: device 0000:01:00.0 is in use by driver 'nouveau', refusing OFF

Reporting bugs

This module has been integrated in Bumblebee "Tumbleweed". Please report any issues on this module in the issue tracker and provide the following details:

  • The output of dmesg | grep -C 10 bbswitch:
  • The kernel version uname -a
  • Your distribution and version (if applicable)
  • The version of your Xorg and the driver
  • Submit your machine information on; the instructions are listed in the bug description. Summary: install the packages containing dmidecode, acpidump and iasl and then run:

    wget sh Upload the generated tarball on the above Launchpad URL and provide a link to the comment containing your report.

Jump to Line
Something went wrong with that request. Please try again.