swift: launching: ./heat_transfer_adios2
size: 6
swift: launching: stage_write/stage_write
 Process number        : 4 x 3
 Array size per process at first step: 40 x 50
Step    1:
Writing:  filename               size(GB)    io_time(sec)      GB/s
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xa8e000, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26043 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 2, outputting to remote stone 0
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0x1784760, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26082 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 3, outputting to remote stone 0
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0x17cdf80, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26069 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 4, outputting to remote stone 0
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xd1a020, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26027 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 2, outputting to remote stone 0

===================================================================================
=   BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
=   PID 4713 RUNNING AT amalikpc
=   EXIT CODE: 139
=   CLEANING UP REMAINING PROCESSES
=   YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
YOUR APPLICATION TERMINATED WITH THE EXIT STRING: Segmentation fault (signal 11)
This typically refers to a problem with your application.
Please see the FAQ page for debugging suggestions
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xa8e440, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26030 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 3, outputting to remote stone 0
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xd1a460, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26079 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 3, outputting to remote stone 0
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xd1a360, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26066 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 4, outputting to remote stone 0
swift: received exit code: 35584
Errno was 111
EVassoc_bridge_action - failed to contact host at contact point 
	Attribute list 0xa8e340, ref_count = 1
[
    { IP_PORT ('0x8df2c994'), Attr_Int4, 26018 }
    { IP_ADDR ('
9˜'), Attr_Int4, 130.199.95.165 }
]
Bridge action association failed for stone 4, outputting to remote stone 0
swift: The launched application did not succeed.
[mpiexec@amalikpc] Sending Ctrl-C to processes as requested
[mpiexec@amalikpc] Press Ctrl-C again to force abort
[mpiexec@amalikpc] Sending Ctrl-C to processes as requested
[mpiexec@amalikpc] Press Ctrl-C again to force abort