Permalink
Cannot retrieve contributors at this time
Fetching contributors…
Cannot retrieve contributors at this time
| Builds a dvswitch/veyepar node builder. | |
| steps: | |
| 1. start with a vanallia Ubuntu box. | |
| 2. sudo apt-get install git-core | |
| 3. git clone git://github.com/CarlFK/veyepar.git | |
| 4. cd veyepar/setup/nodes/pxe | |
| 5. sudo ./install.sh | |
| This will install and configure all the servers, but not start dhcpd. | |
| (you don't want a 2nd primary dhcp server on your lan.) | |
| 6. disconnect from primary lan | |
| 7. connect to video lan | |
| 8. ifconfig eth0 192.168.0.1 | |
| 9. sudo service isc-dhcp-server start | |
| 10. hook up empty nodes, pxe boot, select "hands off install" and wait. | |
| takes about 20 minutes once the cache is warm. | |