Permalink
Browse files

formating for the readme, and updated file links in comments.

  • Loading branch information...
1 parent 4d9357f commit 6f4b5e2ac549a780f83b60576855791a696a8655 @CarryTheWhat committed May 2, 2012
Showing with 27 additions and 25 deletions.
  1. +4 −2 3D-PCB.scad
  2. +23 −23 README.md
View
@@ -7,11 +7,13 @@ use <MCAD/shapes.scad>;
// http://www.gnu.org/licenses/lgpl-2.1.html
//
// links:
-// http://www.thingiverse.com/thing:18800
+// http://www.thingiverse.com/thing:21975 -- main thingiverse page
+// http://www.thingiverse.com/thing:22052 -- flashlight example
// https://github.com/CarryTheWhat/3D-PCB
+// -- instructables for detailed instructions
//
// This is the library for hand-wound solder-free 3D-PCBs, version 0.2
-// With this library, and a 3D printer (so far tested on pp3dp Up! and makerbot's Replicator)
+// With this library, and a 3D printer (so far tested only on makerbot's Replicator)
// it is meant to be printed at the render orientation, with no raft and no support
// It includes the following components:
/* note: this does not include helper functions or intermediary components
View
@@ -1,29 +1,29 @@
-3D-PCB
-======
-OpenSCAD printed circuit board library for solder-free 3D-printable electronics.
+3D-PCB<br>
+======<br>
+OpenSCAD printed circuit board library for solder-free 3D-printable electronics.<br><br>
-Feature set:
- -- power components --
-battery_holder_AAA(count = 1) // by default, makes a holder for 1 battery
-battery_holder_AA(count = 1) // but takes a parameter 'count' for several in series
-battery_holder_button_cell(count = 1)
+Feature set:<br>
+ -- power components --<br>
+battery_holder_AAA(count = 1) // by default, makes a holder for 1 battery<br>
+battery_holder_AA(count = 1) // but takes a parameter 'count' for several in series<br>
+battery_holder_button_cell(count = 1)<br><br>
- -- component holders --
-component_capacitor(diameter = 5.5)
-component_LED(diameter = 5)
-component_2_LEDs(diameter = 5)
-component_resistor()
-component_transistor()
+ -- component holders -- <br>
+component_capacitor(diameter = 5.5)<br>
+component_LED(diameter = 5) <br>
+component_2_LEDs(diameter = 5)<br>
+component_resistor()<br>
+component_transistor()<br><br>
--- and tie it all together --
-base_board(length, width, thickness) - similar to a pcb, you can place on a board
-peg(peg_height = 5, slot_width = 0.8) - start and end point for traces
-peg_cap() - end cap, print separately
-SPST_slide_switch_base() - base structure of slide switch
-SPST_slide_switch_toggle() - sliding structure of switch, print separetly
-trace_hop() - for when traces cross, give two separate channels at 90 degree angle
+-- and tie it all together -- <br>
+base_board(length, width, thickness) - similar to a pcb, you can place on a board<br>
+peg(peg_height = 5, slot_width = 0.8) - start and end point for traces<br>
+peg_cap() - end cap, print separately<br>
+SPST_slide_switch_base() - base structure of slide switch<br>
+SPST_slide_switch_toggle() - sliding structure of switch, print separetly<br>
+trace_hop() - for when traces cross, give two separate channels at 90 degree angle<br><br>
--- functions for placing --
-get_component_distance() = 13.5 - uniform size of components, for easy arranging in grids
+-- functions for placing -- <br>
+get_component_distance() = 13.5 - uniform size of components, for easy arranging in grids<br><br><br>

0 comments on commit 6f4b5e2

Please sign in to comment.