New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[Discussion] WRT3200ACM #24

Closed
ValCher1961 opened this Issue Feb 25, 2017 · 90 comments

Comments

Projects
None yet
2 participants
@ValCher1961

ValCher1961 commented Feb 25, 2017

Chadster Hi!

Why is the file DTS in the management of LED chip recorded "pca9635" in my wrt3200 the chip as in wrt1900ac v1 "tlc59116"?

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 25, 2017

Owner

Good question but I don't know the answer.

Regardless the LED's work. I tested by turning them all off and on manually via script.

The mwlwifi wireless driver doesn't work with them though which is a known issue.

Owner

Chadster766 commented Feb 25, 2017

Good question but I don't know the answer.

Regardless the LED's work. I tested by turning them all off and on manually via script.

The mwlwifi wireless driver doesn't work with them though which is a known issue.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 25, 2017

Can compatible chips, or different versions of wrt3200?
Or accidentally moved the file dts cobra?

ValCher1961 commented Feb 25, 2017

Can compatible chips, or different versions of wrt3200?
Or accidentally moved the file dts cobra?

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 25, 2017

Owner

I think they are compatible chips

Owner

Chadster766 commented Feb 25, 2017

I think they are compatible chips

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

To highlight the SATA and USB, I added in rc.local commands:

echo disk-activity >/sys/class/leds/rango:white:sata/trigger
echo usb-host >/sys/class/leds/rango:white:usb2/trigger
echo usb-host >/sys/class/leds/rango:white:usb3_1/trigger

ValCher1961 commented Feb 26, 2017

To highlight the SATA and USB, I added in rc.local commands:

echo disk-activity >/sys/class/leds/rango:white:sata/trigger
echo usb-host >/sys/class/leds/rango:white:usb2/trigger
echo usb-host >/sys/class/leds/rango:white:usb3_1/trigger
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

Interesting, I will look into this LED option.

I thought the dts was taking care of this.

Owner

Chadster766 commented Feb 26, 2017

Interesting, I will look into this LED option.

I thought the dts was taking care of this.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

I have goes error in switch (DSA) when building the kernel 4.10

DTC     arch/arm/boot/dts/armada-385-linksys-rango.dtb
Warning (reg_format): "reg" property in /mvsw61xx has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

Remember for the mamba was such a patch, I think fix current DTS

--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -480,6 +480,14 @@
                        };
                };
        };
+
+       swconfig {
+               compatible = "marvell,88e6172";
+               mii-bus = <&mdio>;
+               cpu-port-0 = <5>;
+               cpu-port-1 = <6>;
+               status = "okay";
+       };
 };

 &pinctrl {
--

ValCher1961 commented Feb 26, 2017

I have goes error in switch (DSA) when building the kernel 4.10

DTC     arch/arm/boot/dts/armada-385-linksys-rango.dtb
Warning (reg_format): "reg" property in /mvsw61xx has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

Remember for the mamba was such a patch, I think fix current DTS

--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -480,6 +480,14 @@
                        };
                };
        };
+
+       swconfig {
+               compatible = "marvell,88e6172";
+               mii-bus = <&mdio>;
+               cpu-port-0 = <5>;
+               cpu-port-1 = <6>;
+               status = "okay";
+       };
 };

 &pinctrl {
--
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

You can safely ignore that DTS build error the DSA switch will work normally.

Owner

Chadster766 commented Feb 26, 2017

You can safely ignore that DTS build error the DSA switch will work normally.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

I think I found a bug in dts, here it is-

	mvsw61xx {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "marvell,88e6352";
		status = "okay";
	        reg = <0x10>; >>>> so it must be >>> reg = <0x1 0>;  

		mii-bus = <&mdio>;
		cpu-port-0 = <5>;
		cpu-port-1 = <6>;
	};

};

ValCher1961 commented Feb 26, 2017

I think I found a bug in dts, here it is-

	mvsw61xx {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "marvell,88e6352";
		status = "okay";
	        reg = <0x10>; >>>> so it must be >>> reg = <0x1 0>;  

		mii-bus = <&mdio>;
		cpu-port-0 = <5>;
		cpu-port-1 = <6>;
	};

};
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

That could be. I will research this too.

Owner

Chadster766 commented Feb 26, 2017

That could be. I will research this too.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

I bet the whole "reg = <0x10>; " line isn't required.

Owner

Chadster766 commented Feb 26, 2017

I bet the whole "reg = <0x10>; " line isn't required.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

And if you take the analogy with switch, in comments written
Reg = < 0x0 0 >;/* MDIO address 0, switch 0 in tree */

ValCher1961 commented Feb 26, 2017

And if you take the analogy with switch, in comments written
Reg = < 0x0 0 >;/* MDIO address 0, switch 0 in tree */

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

We now have appeared

root@wrt3200acm:/sys/devices/platform# ls
1.mvsw61xx  dsa@0             gpio_keys  pmu    reg-dummy     serial8250  uevent    xhci0-vbus
alarmtimer  Fixed MDIO bus.0  gpio-leds  power  regulatory.0  soc         usb3_phy

ValCher1961 commented Feb 26, 2017

We now have appeared

root@wrt3200acm:/sys/devices/platform# ls
1.mvsw61xx  dsa@0             gpio_keys  pmu    reg-dummy     serial8250  uevent    xhci0-vbus
alarmtimer  Fixed MDIO bus.0  gpio-leds  power  regulatory.0  soc         usb3_phy
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

I removed the dts line and rebuilt dts without error:

root@MCDEBIAN:~# ls /sys/devices/platform
Fixed MDIO bus.0  alarmtimer  dsa@0  gpio-leds  gpio_keys  mvsw61xx  pmu  power  reg-dummy  regulatory.0  serial8250  soc  uevent  usb3_phy  xhci0-vbus
Owner

Chadster766 commented Feb 26, 2017

I removed the dts line and rebuilt dts without error:

root@MCDEBIAN:~# ls /sys/devices/platform
Fixed MDIO bus.0  alarmtimer  dsa@0  gpio-leds  gpio_keys  mvsw61xx  pmu  power  reg-dummy  regulatory.0  serial8250  soc  uevent  usb3_phy  xhci0-vbus
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

This is what shows if the current dts line with the warning is kept in:

root@MCDEBIAN:~# ls /sys/devices/platform
10.mvsw61xx  Fixed MDIO bus.0  alarmtimer  dsa@0  gpio-leds  gpio_keys  pmu  power  reg-dummy  regulatory.0  serial8250  soc  uevent  usb3_phy  xhci0-vbus
Owner

Chadster766 commented Feb 26, 2017

This is what shows if the current dts line with the warning is kept in:

root@MCDEBIAN:~# ls /sys/devices/platform
10.mvsw61xx  Fixed MDIO bus.0  alarmtimer  dsa@0  gpio-leds  gpio_keys  pmu  power  reg-dummy  regulatory.0  serial8250  soc  uevent  usb3_phy  xhci0-vbus
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

OK!
will check on, want to find a way to control the LED/WiFi

ValCher1961 commented Feb 26, 2017

OK!
will check on, want to find a way to control the LED/WiFi

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

The LED Wifi control can't be done AFAIK because the mwlwifi 88W8964.bin file controls that. I hope I'm wrong on this 😄

That's why you can't turn the Wifi LED's on or off without restricting the mwlwifi module first.

The next mwlwifi firmware release should fix that (hopefully).

Owner

Chadster766 commented Feb 26, 2017

The LED Wifi control can't be done AFAIK because the mwlwifi 88W8964.bin file controls that. I hope I'm wrong on this 😄

That's why you can't turn the Wifi LED's on or off without restricting the mwlwifi module first.

The next mwlwifi firmware release should fix that (hopefully).

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

Yes, I have become a guess, well, let's wait for the new firmware.

ValCher1961 commented Feb 26, 2017

Yes, I have become a guess, well, let's wait for the new firmware.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

Can you do iperf3 WAN to LAN throughput testing on the DSA switch with the "reg = <0x10>; " line removed? I would but I have my WRT3200ACM running without the DSA switch to test the latest McDebian (4.9.12) wireless stability over the next week.

Owner

Chadster766 commented Feb 26, 2017

Can you do iperf3 WAN to LAN throughput testing on the DSA switch with the "reg = <0x10>; " line removed? I would but I have my WRT3200ACM running without the DSA switch to test the latest McDebian (4.9.12) wireless stability over the next week.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 26, 2017

Yes, of course, but only tomorrow.

ValCher1961 commented Feb 26, 2017

Yes, of course, but only tomorrow.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 26, 2017

Owner

Thanks much appreciated 😄

Owner

Chadster766 commented Feb 26, 2017

Thanks much appreciated 😄

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

How to test (schematic)
image

Tests will be put on the queue
now with the string that I have [reg = < 0x1 0 >]

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50398 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50401 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  39.5 MBytes   327 Mbits/sec
[  6]   0.00-1.01   sec  36.2 MBytes   299 Mbits/sec
[SUM]   0.00-1.01   sec  75.7 MBytes   626 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  56.9 MBytes   478 Mbits/sec
[  6]   1.01-2.01   sec  51.6 MBytes   433 Mbits/sec
[SUM]   1.01-2.01   sec   108 MBytes   912 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  56.5 MBytes   475 Mbits/sec
[  6]   2.01-3.01   sec  53.0 MBytes   445 Mbits/sec
[SUM]   2.01-3.01   sec   110 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  53.6 MBytes   450 Mbits/sec
[  6]   3.01-4.01   sec  52.6 MBytes   442 Mbits/sec
[SUM]   3.01-4.01   sec   106 MBytes   892 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   4.01-5.01   sec  54.6 MBytes   459 Mbits/sec
[SUM]   4.01-5.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   5.01-6.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   5.01-6.01   sec   109 MBytes   913 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.00   sec  55.4 MBytes   465 Mbits/sec
[  6]   6.01-7.00   sec  53.1 MBytes   446 Mbits/sec
[SUM]   6.01-7.00   sec   108 MBytes   911 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.00-8.00   sec  55.9 MBytes   469 Mbits/sec
[  6]   7.00-8.00   sec  52.0 MBytes   437 Mbits/sec
[SUM]   7.00-8.00   sec   108 MBytes   906 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  55.1 MBytes   463 Mbits/sec
[  6]   8.00-9.00   sec  51.5 MBytes   433 Mbits/sec
[SUM]   8.00-9.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.02  sec  56.1 MBytes   464 Mbits/sec
[  6]   9.00-10.02  sec  55.0 MBytes   455 Mbits/sec
[SUM]   9.00-10.02  sec   111 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.02  sec   539 MBytes   452 Mbits/sec                  sender
[  4]   0.00-10.02  sec   539 MBytes   452 Mbits/sec                  receiver
[  6]   0.00-10.02  sec   513 MBytes   429 Mbits/sec                  sender
[  6]   0.00-10.02  sec   513 MBytes   429 Mbits/sec                  receiver
[SUM]   0.00-10.02  sec  1.03 GBytes   881 Mbits/sec                  sender
[SUM]   0.00-10.02  sec  1.03 GBytes   881 Mbits/sec                  receiver

ValCher1961 commented Feb 27, 2017

How to test (schematic)
image

Tests will be put on the queue
now with the string that I have [reg = < 0x1 0 >]

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50398 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50401 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  39.5 MBytes   327 Mbits/sec
[  6]   0.00-1.01   sec  36.2 MBytes   299 Mbits/sec
[SUM]   0.00-1.01   sec  75.7 MBytes   626 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  56.9 MBytes   478 Mbits/sec
[  6]   1.01-2.01   sec  51.6 MBytes   433 Mbits/sec
[SUM]   1.01-2.01   sec   108 MBytes   912 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  56.5 MBytes   475 Mbits/sec
[  6]   2.01-3.01   sec  53.0 MBytes   445 Mbits/sec
[SUM]   2.01-3.01   sec   110 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  53.6 MBytes   450 Mbits/sec
[  6]   3.01-4.01   sec  52.6 MBytes   442 Mbits/sec
[SUM]   3.01-4.01   sec   106 MBytes   892 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   4.01-5.01   sec  54.6 MBytes   459 Mbits/sec
[SUM]   4.01-5.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   5.01-6.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   5.01-6.01   sec   109 MBytes   913 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.00   sec  55.4 MBytes   465 Mbits/sec
[  6]   6.01-7.00   sec  53.1 MBytes   446 Mbits/sec
[SUM]   6.01-7.00   sec   108 MBytes   911 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.00-8.00   sec  55.9 MBytes   469 Mbits/sec
[  6]   7.00-8.00   sec  52.0 MBytes   437 Mbits/sec
[SUM]   7.00-8.00   sec   108 MBytes   906 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  55.1 MBytes   463 Mbits/sec
[  6]   8.00-9.00   sec  51.5 MBytes   433 Mbits/sec
[SUM]   8.00-9.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.02  sec  56.1 MBytes   464 Mbits/sec
[  6]   9.00-10.02  sec  55.0 MBytes   455 Mbits/sec
[SUM]   9.00-10.02  sec   111 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.02  sec   539 MBytes   452 Mbits/sec                  sender
[  4]   0.00-10.02  sec   539 MBytes   452 Mbits/sec                  receiver
[  6]   0.00-10.02  sec   513 MBytes   429 Mbits/sec                  sender
[  6]   0.00-10.02  sec   513 MBytes   429 Mbits/sec                  receiver
[SUM]   0.00-10.02  sec  1.03 GBytes   881 Mbits/sec                  sender
[SUM]   0.00-10.02  sec  1.03 GBytes   881 Mbits/sec                  receiver
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 27, 2017

Owner

Perfect, how about without the "-R"?

Do you have the switch driver loaded and the DSA interfaces setup?

Owner

Chadster766 commented Feb 27, 2017

Perfect, how about without the "-R"?

Do you have the switch driver loaded and the DSA interfaces setup?

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

[reg = < 0x10 >]

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50558 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50561 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  38.0 MBytes   314 Mbits/sec
[  6]   0.00-1.01   sec  37.0 MBytes   306 Mbits/sec
[SUM]   0.00-1.01   sec  75.0 MBytes   620 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  54.1 MBytes   455 Mbits/sec
[  6]   1.01-2.01   sec  55.2 MBytes   464 Mbits/sec
[SUM]   1.01-2.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  54.9 MBytes   461 Mbits/sec
[  6]   2.01-3.01   sec  54.6 MBytes   459 Mbits/sec
[SUM]   2.01-3.01   sec   110 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  58.4 MBytes   490 Mbits/sec
[  6]   3.01-4.01   sec  51.1 MBytes   429 Mbits/sec
[SUM]   3.01-4.01   sec   109 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  52.5 MBytes   441 Mbits/sec
[  6]   4.01-5.01   sec  55.9 MBytes   470 Mbits/sec
[SUM]   4.01-5.01   sec   108 MBytes   911 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  49.7 MBytes   417 Mbits/sec
[  6]   5.01-6.01   sec  57.9 MBytes   486 Mbits/sec
[SUM]   5.01-6.01   sec   108 MBytes   904 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.00   sec  51.4 MBytes   432 Mbits/sec
[  6]   6.01-7.00   sec  56.8 MBytes   477 Mbits/sec
[SUM]   6.01-7.00   sec   108 MBytes   909 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.00-8.00   sec  49.0 MBytes   412 Mbits/sec
[  6]   7.00-8.00   sec  58.3 MBytes   490 Mbits/sec
[SUM]   7.00-8.00   sec   107 MBytes   902 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  53.8 MBytes   452 Mbits/sec
[  6]   8.00-9.00   sec  55.5 MBytes   466 Mbits/sec
[SUM]   8.00-9.00   sec   109 MBytes   918 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.02  sec  55.5 MBytes   459 Mbits/sec
[  6]   9.00-10.02  sec  55.3 MBytes   457 Mbits/sec
[SUM]   9.00-10.02  sec   111 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.02  sec   517 MBytes   433 Mbits/sec                  sender
[  4]   0.00-10.02  sec   517 MBytes   433 Mbits/sec                  receiver
[  6]   0.00-10.02  sec   538 MBytes   450 Mbits/sec                  sender
[  6]   0.00-10.02  sec   538 MBytes   450 Mbits/sec                  receiver
[SUM]   0.00-10.02  sec  1.03 GBytes   884 Mbits/sec                  sender
[SUM]   0.00-10.02  sec  1.03 GBytes   884 Mbits/sec                  receiver

Identical to

ValCher1961 commented Feb 27, 2017

[reg = < 0x10 >]

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50558 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50561 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  38.0 MBytes   314 Mbits/sec
[  6]   0.00-1.01   sec  37.0 MBytes   306 Mbits/sec
[SUM]   0.00-1.01   sec  75.0 MBytes   620 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  54.1 MBytes   455 Mbits/sec
[  6]   1.01-2.01   sec  55.2 MBytes   464 Mbits/sec
[SUM]   1.01-2.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  54.9 MBytes   461 Mbits/sec
[  6]   2.01-3.01   sec  54.6 MBytes   459 Mbits/sec
[SUM]   2.01-3.01   sec   110 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  58.4 MBytes   490 Mbits/sec
[  6]   3.01-4.01   sec  51.1 MBytes   429 Mbits/sec
[SUM]   3.01-4.01   sec   109 MBytes   920 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  52.5 MBytes   441 Mbits/sec
[  6]   4.01-5.01   sec  55.9 MBytes   470 Mbits/sec
[SUM]   4.01-5.01   sec   108 MBytes   911 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  49.7 MBytes   417 Mbits/sec
[  6]   5.01-6.01   sec  57.9 MBytes   486 Mbits/sec
[SUM]   5.01-6.01   sec   108 MBytes   904 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.00   sec  51.4 MBytes   432 Mbits/sec
[  6]   6.01-7.00   sec  56.8 MBytes   477 Mbits/sec
[SUM]   6.01-7.00   sec   108 MBytes   909 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.00-8.00   sec  49.0 MBytes   412 Mbits/sec
[  6]   7.00-8.00   sec  58.3 MBytes   490 Mbits/sec
[SUM]   7.00-8.00   sec   107 MBytes   902 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  53.8 MBytes   452 Mbits/sec
[  6]   8.00-9.00   sec  55.5 MBytes   466 Mbits/sec
[SUM]   8.00-9.00   sec   109 MBytes   918 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.02  sec  55.5 MBytes   459 Mbits/sec
[  6]   9.00-10.02  sec  55.3 MBytes   457 Mbits/sec
[SUM]   9.00-10.02  sec   111 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.02  sec   517 MBytes   433 Mbits/sec                  sender
[  4]   0.00-10.02  sec   517 MBytes   433 Mbits/sec                  receiver
[  6]   0.00-10.02  sec   538 MBytes   450 Mbits/sec                  sender
[  6]   0.00-10.02  sec   538 MBytes   450 Mbits/sec                  receiver
[SUM]   0.00-10.02  sec  1.03 GBytes   884 Mbits/sec                  sender
[SUM]   0.00-10.02  sec  1.03 GBytes   884 Mbits/sec                  receiver

Identical to

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2
Connecting to host 192.168.0.102, port 5201
[  4] local 127.0.0.1 port 50692 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50695 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  48.5 MBytes   401 Mbits/sec
[  6]   0.00-1.01   sec  45.6 MBytes   377 Mbits/sec
[SUM]   0.00-1.01   sec  94.1 MBytes   779 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  53.6 MBytes   451 Mbits/sec
[  6]   1.01-2.01   sec  51.6 MBytes   434 Mbits/sec
[SUM]   1.01-2.01   sec   105 MBytes   884 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  46.5 MBytes   391 Mbits/sec
[  6]   2.01-3.01   sec  45.0 MBytes   378 Mbits/sec
[SUM]   2.01-3.01   sec  91.5 MBytes   769 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  44.0 MBytes   370 Mbits/sec
[  6]   3.01-4.01   sec  48.9 MBytes   411 Mbits/sec
[SUM]   3.01-4.01   sec  92.9 MBytes   780 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  56.6 MBytes   476 Mbits/sec
[  6]   4.01-5.01   sec  48.6 MBytes   409 Mbits/sec
[SUM]   4.01-5.01   sec   105 MBytes   884 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   5.01-6.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   5.01-6.01   sec   108 MBytes   906 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.01   sec  54.0 MBytes   454 Mbits/sec
[  6]   6.01-7.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   6.01-7.01   sec   107 MBytes   900 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.01-8.00   sec  50.6 MBytes   425 Mbits/sec
[  6]   7.01-8.00   sec  56.0 MBytes   471 Mbits/sec
[SUM]   7.01-8.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  53.2 MBytes   447 Mbits/sec
[  6]   8.00-9.00   sec  53.4 MBytes   448 Mbits/sec
[SUM]   8.00-9.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.00  sec  53.2 MBytes   447 Mbits/sec
[  6]   9.00-10.00  sec  52.2 MBytes   439 Mbits/sec
[SUM]   9.00-10.00  sec   106 MBytes   886 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   515 MBytes   432 Mbits/sec                  sender
[  4]   0.00-10.00  sec   515 MBytes   432 Mbits/sec                  receiver
[  6]   0.00-10.00  sec   508 MBytes   426 Mbits/sec                  sender
[  6]   0.00-10.00  sec   507 MBytes   425 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec  1023 MBytes   858 Mbits/sec                  sender
[SUM]   0.00-10.00  sec  1022 MBytes   857 Mbits/sec                  receiver

ValCher1961 commented Feb 27, 2017

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2
Connecting to host 192.168.0.102, port 5201
[  4] local 127.0.0.1 port 50692 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50695 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  48.5 MBytes   401 Mbits/sec
[  6]   0.00-1.01   sec  45.6 MBytes   377 Mbits/sec
[SUM]   0.00-1.01   sec  94.1 MBytes   779 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  53.6 MBytes   451 Mbits/sec
[  6]   1.01-2.01   sec  51.6 MBytes   434 Mbits/sec
[SUM]   1.01-2.01   sec   105 MBytes   884 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  46.5 MBytes   391 Mbits/sec
[  6]   2.01-3.01   sec  45.0 MBytes   378 Mbits/sec
[SUM]   2.01-3.01   sec  91.5 MBytes   769 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  44.0 MBytes   370 Mbits/sec
[  6]   3.01-4.01   sec  48.9 MBytes   411 Mbits/sec
[SUM]   3.01-4.01   sec  92.9 MBytes   780 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  56.6 MBytes   476 Mbits/sec
[  6]   4.01-5.01   sec  48.6 MBytes   409 Mbits/sec
[SUM]   4.01-5.01   sec   105 MBytes   884 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   5.01-6.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   5.01-6.01   sec   108 MBytes   906 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.01   sec  54.0 MBytes   454 Mbits/sec
[  6]   6.01-7.01   sec  53.1 MBytes   446 Mbits/sec
[SUM]   6.01-7.01   sec   107 MBytes   900 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.01-8.00   sec  50.6 MBytes   425 Mbits/sec
[  6]   7.01-8.00   sec  56.0 MBytes   471 Mbits/sec
[SUM]   7.01-8.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  53.2 MBytes   447 Mbits/sec
[  6]   8.00-9.00   sec  53.4 MBytes   448 Mbits/sec
[SUM]   8.00-9.00   sec   107 MBytes   896 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.00  sec  53.2 MBytes   447 Mbits/sec
[  6]   9.00-10.00  sec  52.2 MBytes   439 Mbits/sec
[SUM]   9.00-10.00  sec   106 MBytes   886 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   515 MBytes   432 Mbits/sec                  sender
[  4]   0.00-10.00  sec   515 MBytes   432 Mbits/sec                  receiver
[  6]   0.00-10.00  sec   508 MBytes   426 Mbits/sec                  sender
[  6]   0.00-10.00  sec   507 MBytes   425 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec  1023 MBytes   858 Mbits/sec                  sender
[SUM]   0.00-10.00  sec  1022 MBytes   857 Mbits/sec                  receiver
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

DSA driver in the kernel.
Are you asking about configuring the file "interfaces"?

ValCher1961 commented Feb 27, 2017

DSA driver in the kernel.
Are you asking about configuring the file "interfaces"?

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 27, 2017

Owner

Yes /etc/interfaces (lan1, lan1, wan, etc...)

Owner

Chadster766 commented Feb 27, 2017

Yes /etc/interfaces (lan1, lan1, wan, etc...)

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017


# interfaces(5) file used by ifup(8) and ifdown(8)

auto lo
iface lo inet loopback
        post-up ifconfig lo txqueuelen 1000

allow-hotplug eth1
        iface eth1 inet static
        address 0.0.0.0
        post-up ifconfig eth1 txqueuelen 1000
        post-up ethtool -K eth0 gro off

allow-hotplug lan1
        iface lan1 inet manual
allow-hotplug lan2
        iface lan2 inet manual
allow-hotplug lan3
        iface lan3 inet manual
allow-hotplug lan4
        iface lan4 inet manual

#auto wlan0
allow-hotplug wlan0
        iface wlan0 inet manual
        hostapd /etc/hostapd/hostapd_0.conf

#auto wlan1
allow-hotplug wlan1
        iface wlan1 inet manual
        hostapd /etc/hostapd/hostapd_1.conf

#auto br-lan
allow-hotplug br-lan
        iface br-lan inet static
        bridge_ports eth1 lan1 lan2 lan3 lan4 wlan0 wlan1
        address 192.168.1.1
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        dns-nameserver 8.8.8.8 8.8.4.4
        post-up ethtool -K br-lan gro off

#auto wan
allow-hotplug wan
        iface wan inet dhcp
        hwaddress ether 94:10:3E:8C:AB:01
        post-up ethtool -K wan gro off gso off
        post-up /etc/iptables

ValCher1961 commented Feb 27, 2017


# interfaces(5) file used by ifup(8) and ifdown(8)

auto lo
iface lo inet loopback
        post-up ifconfig lo txqueuelen 1000

allow-hotplug eth1
        iface eth1 inet static
        address 0.0.0.0
        post-up ifconfig eth1 txqueuelen 1000
        post-up ethtool -K eth0 gro off

allow-hotplug lan1
        iface lan1 inet manual
allow-hotplug lan2
        iface lan2 inet manual
allow-hotplug lan3
        iface lan3 inet manual
allow-hotplug lan4
        iface lan4 inet manual

#auto wlan0
allow-hotplug wlan0
        iface wlan0 inet manual
        hostapd /etc/hostapd/hostapd_0.conf

#auto wlan1
allow-hotplug wlan1
        iface wlan1 inet manual
        hostapd /etc/hostapd/hostapd_1.conf

#auto br-lan
allow-hotplug br-lan
        iface br-lan inet static
        bridge_ports eth1 lan1 lan2 lan3 lan4 wlan0 wlan1
        address 192.168.1.1
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        dns-nameserver 8.8.8.8 8.8.4.4
        post-up ethtool -K br-lan gro off

#auto wan
allow-hotplug wan
        iface wan inet dhcp
        hwaddress ether 94:10:3E:8C:AB:01
        post-up ethtool -K wan gro off gso off
        post-up /etc/iptables
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Feb 27, 2017

Owner

Looks good.

How about the iperf3 with the reg line removed from the dts?

Owner

Chadster766 commented Feb 27, 2017

Looks good.

How about the iperf3 with the reg line removed from the dts?

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

Test with clean string.

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50851 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50854 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  55.9 MBytes   463 Mbits/sec
[  6]   0.00-1.01   sec  55.8 MBytes   461 Mbits/sec
[SUM]   0.00-1.01   sec   112 MBytes   924 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  55.8 MBytes   469 Mbits/sec
[  6]   1.01-2.01   sec  54.0 MBytes   454 Mbits/sec
[SUM]   1.01-2.01   sec   110 MBytes   923 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  56.5 MBytes   474 Mbits/sec
[  6]   2.01-3.01   sec  52.9 MBytes   443 Mbits/sec
[SUM]   2.01-3.01   sec   109 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  55.8 MBytes   469 Mbits/sec
[  6]   3.01-4.01   sec  54.0 MBytes   454 Mbits/sec
[SUM]   3.01-4.01   sec   110 MBytes   923 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   4.01-5.01   sec  53.8 MBytes   452 Mbits/sec
[SUM]   4.01-5.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   5.01-6.01   sec  54.4 MBytes   457 Mbits/sec
[SUM]   5.01-6.01   sec   109 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   6.01-7.01   sec  54.9 MBytes   461 Mbits/sec
[SUM]   6.01-7.01   sec   110 MBytes   928 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.01-8.00   sec  55.1 MBytes   463 Mbits/sec
[  6]   7.01-8.00   sec  55.2 MBytes   464 Mbits/sec
[SUM]   7.01-8.00   sec   110 MBytes   927 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  55.2 MBytes   464 Mbits/sec
[  6]   8.00-9.00   sec  55.0 MBytes   462 Mbits/sec
[SUM]   8.00-9.00   sec   110 MBytes   926 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.00  sec  55.1 MBytes   463 Mbits/sec
[  6]   9.00-10.00  sec  55.0 MBytes   462 Mbits/sec
[SUM]   9.00-10.00  sec   110 MBytes   925 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   556 MBytes   466 Mbits/sec                  sender
[  4]   0.00-10.00  sec   556 MBytes   466 Mbits/sec                  receiver
[  6]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  sender
[  6]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec  1.07 GBytes   923 Mbits/sec                  sender
[SUM]   0.00-10.00  sec  1.07 GBytes   923 Mbits/sec                  receiver

ValCher1961 commented Feb 27, 2017

Test with clean string.

D:\Users\ValCher>d:\tools\iperf\iperf3 -c 192.168.0.102 -P2 -R
Connecting to host 192.168.0.102, port 5201
Reverse mode, remote host 192.168.0.102 is sending
[  4] local 127.0.0.1 port 50851 connected to 192.168.0.102 port 5201
[  6] local 127.0.0.1 port 50854 connected to 192.168.0.102 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  55.9 MBytes   463 Mbits/sec
[  6]   0.00-1.01   sec  55.8 MBytes   461 Mbits/sec
[SUM]   0.00-1.01   sec   112 MBytes   924 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   1.01-2.01   sec  55.8 MBytes   469 Mbits/sec
[  6]   1.01-2.01   sec  54.0 MBytes   454 Mbits/sec
[SUM]   1.01-2.01   sec   110 MBytes   923 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   2.01-3.01   sec  56.5 MBytes   474 Mbits/sec
[  6]   2.01-3.01   sec  52.9 MBytes   443 Mbits/sec
[SUM]   2.01-3.01   sec   109 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   3.01-4.01   sec  55.8 MBytes   469 Mbits/sec
[  6]   3.01-4.01   sec  54.0 MBytes   454 Mbits/sec
[SUM]   3.01-4.01   sec   110 MBytes   923 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   4.01-5.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   4.01-5.01   sec  53.8 MBytes   452 Mbits/sec
[SUM]   4.01-5.01   sec   109 MBytes   919 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.01-6.01   sec  54.8 MBytes   460 Mbits/sec
[  6]   5.01-6.01   sec  54.4 MBytes   457 Mbits/sec
[SUM]   5.01-6.01   sec   109 MBytes   917 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   6.01-7.01   sec  55.5 MBytes   466 Mbits/sec
[  6]   6.01-7.01   sec  54.9 MBytes   461 Mbits/sec
[SUM]   6.01-7.01   sec   110 MBytes   928 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   7.01-8.00   sec  55.1 MBytes   463 Mbits/sec
[  6]   7.01-8.00   sec  55.2 MBytes   464 Mbits/sec
[SUM]   7.01-8.00   sec   110 MBytes   927 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   8.00-9.00   sec  55.2 MBytes   464 Mbits/sec
[  6]   8.00-9.00   sec  55.0 MBytes   462 Mbits/sec
[SUM]   8.00-9.00   sec   110 MBytes   926 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   9.00-10.00  sec  55.1 MBytes   463 Mbits/sec
[  6]   9.00-10.00  sec  55.0 MBytes   462 Mbits/sec
[SUM]   9.00-10.00  sec   110 MBytes   925 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   556 MBytes   466 Mbits/sec                  sender
[  4]   0.00-10.00  sec   556 MBytes   466 Mbits/sec                  receiver
[  6]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  sender
[  6]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec  1.07 GBytes   923 Mbits/sec                  sender
[SUM]   0.00-10.00  sec  1.07 GBytes   923 Mbits/sec                  receiver
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Feb 27, 2017

I think he looks a little better

ValCher1961 commented Feb 27, 2017

I think he looks a little better

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 5, 2017

Give your .config, I gather the kernel with modules and put on USB2 and USB3.

ValCher1961 commented May 5, 2017

Give your .config, I gather the kernel with modules and put on USB2 and USB3.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 6, 2017

Collected kernel with your .config and DTS.
My drive works at all ports, think of your equipment incompatibility with kernel 4.9.X.
Here are my logs from USB2 and USB3. Connection to port did after power off the router.

USB2.0

root@wrt3200acm:~# dmesg |grep -i usb
[    1.222174] orion-ehci f1058000.usb: EHCI Host Controller
[    1.227601] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.235249] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.261626] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.267847] hub 1-0:1.0: USB hub found
[    1.275962] usbcore: registered new interface driver usb-storage
[    1.435800] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.441143] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.448729] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.457314] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.463413] hub 2-0:1.0: USB hub found
[    1.471254] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.476607] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.484168] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.492559] hub 3-0:1.0: USB hub found
[    1.631626] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.823043] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.829247] scsi host2: usb-storage 1-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    2.891375] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    2.899494] sd 2:0:0:0: [sda] Write Protect is off
[    2.904314] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.904743] sd 2:0:0:0: [sda] No Caching mode page found
[    2.910076] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.920874]  sda: sda1 sda2 sda3
[    2.924252] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    2.935997]  sda: sda1 sda2 sda3
[    2.939352] sda: p3 size 91014960 extends beyond EOD, truncated
[    2.947118] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.562289] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    6.577991] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.769249] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.777482] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.784488] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.789561] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.876092] EXT4-fs (sda1): re-mounted. Opts: (null)
[    9.904886] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.913120] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.920128] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.925217] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.945501] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.953730] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.960724] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.965807] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.387623] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.395855] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.402859] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.407933] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.429410] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[   10.559078] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
root@wrt3200acm:~#

USB3.0

root@wrt3200acm:~# dmesg |grep -i usb
[    1.435789] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.441132] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.448715] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.457302] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.463400] hub 2-0:1.0: USB hub found
[    1.471243] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.476595] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.484161] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.492541] hub 3-0:1.0: USB hub found
[    1.821624] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    1.992488] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.998690] scsi host2: usb-storage 2-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    3.050539] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    3.058487] sd 2:0:0:0: [sda] Write Protect is off
[    3.063303] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.063554] sd 2:0:0:0: [sda] No Caching mode page found
[    3.068886] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.077172]  sda: sda1 sda2 sda3
[    3.080533] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    3.089826]  sda: sda1 sda2 sda3
[    3.093194] sda: p3 size 91014960 extends beyond EOD, truncated
[    3.100084] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.561976] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    6.575945] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.285070] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.293305] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.300296] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.305376] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.623199] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.631422] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.631427] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.631431] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.711331] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.719570] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.726586] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.731677] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.742570] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.750787] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.757787] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.762875] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.878520] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[    9.994753] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.148171] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
root@wrt3200acm:~#

ValCher1961 commented May 6, 2017

Collected kernel with your .config and DTS.
My drive works at all ports, think of your equipment incompatibility with kernel 4.9.X.
Here are my logs from USB2 and USB3. Connection to port did after power off the router.

USB2.0

root@wrt3200acm:~# dmesg |grep -i usb
[    1.222174] orion-ehci f1058000.usb: EHCI Host Controller
[    1.227601] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.235249] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.261626] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.267847] hub 1-0:1.0: USB hub found
[    1.275962] usbcore: registered new interface driver usb-storage
[    1.435800] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.441143] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.448729] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.457314] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.463413] hub 2-0:1.0: USB hub found
[    1.471254] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.476607] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.484168] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.492559] hub 3-0:1.0: USB hub found
[    1.631626] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.823043] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.829247] scsi host2: usb-storage 1-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    2.891375] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    2.899494] sd 2:0:0:0: [sda] Write Protect is off
[    2.904314] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.904743] sd 2:0:0:0: [sda] No Caching mode page found
[    2.910076] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.920874]  sda: sda1 sda2 sda3
[    2.924252] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    2.935997]  sda: sda1 sda2 sda3
[    2.939352] sda: p3 size 91014960 extends beyond EOD, truncated
[    2.947118] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.562289] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    6.577991] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.769249] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.777482] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.784488] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.789561] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.876092] EXT4-fs (sda1): re-mounted. Opts: (null)
[    9.904886] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.913120] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.920128] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.925217] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.945501] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.953730] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.960724] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.965807] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.387623] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.395855] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.402859] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.407933] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.429410] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[   10.559078] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
root@wrt3200acm:~#

USB3.0

root@wrt3200acm:~# dmesg |grep -i usb
[    1.435789] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.441132] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.448715] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.457302] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.463400] hub 2-0:1.0: USB hub found
[    1.471243] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.476595] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.484161] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.492541] hub 3-0:1.0: USB hub found
[    1.821624] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    1.992488] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.998690] scsi host2: usb-storage 2-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    3.050539] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    3.058487] sd 2:0:0:0: [sda] Write Protect is off
[    3.063303] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.063554] sd 2:0:0:0: [sda] No Caching mode page found
[    3.068886] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.077172]  sda: sda1 sda2 sda3
[    3.080533] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    3.089826]  sda: sda1 sda2 sda3
[    3.093194] sda: p3 size 91014960 extends beyond EOD, truncated
[    3.100084] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.561976] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    6.575945] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.285070] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.293305] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.300296] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.305376] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.623199] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.631422] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.631427] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.631431] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.711331] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.719570] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.726586] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.731677] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.742570] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.750787] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.757787] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.762875] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[    9.878520] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[    9.994753] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.148171] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
root@wrt3200acm:~#
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 6, 2017

Owner

To test you need to have a new (never been used) McDebian roots and boot with it only plugged into the USB3.

Owner

Chadster766 commented May 6, 2017

To test you need to have a new (never been used) McDebian roots and boot with it only plugged into the USB3.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 6, 2017

Here's the output from nucleus 4.10 X

root@wrt3200acm:~# dmesg |grep -i usb
[    0.130887] usbcore: registered new interface driver usbfs
[    0.130913] usbcore: registered new interface driver hub
[    0.130934] usbcore: registered new device driver usb
[    1.264440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.279603] orion-ehci f1058000.usb: EHCI Host Controller
[    1.285106] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.292748] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.321685] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.327710] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.334541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.341796] usb usb1: Product: EHCI Host Controller
[    1.346693] usb usb1: Manufacturer: Linux 4.10.14 ehci_hcd
[    1.352201] usb usb1: SerialNumber: f1058000.usb
[    1.357059] hub 1-0:1.0: USB hub found
[    1.365122] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.370531] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.378110] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.386687] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.392531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.399352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.406614] usb usb2: Product: xHCI Host Controller
[    1.411510] usb usb2: Manufacturer: Linux 4.10.14 xhci-hcd
[    1.417020] usb usb2: SerialNumber: f10f8000.usb3
[    1.421956] hub 2-0:1.0: USB hub found
[    1.429803] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.435214] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.442771] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.461827] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.468643] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.475903] usb usb3: Product: xHCI Host Controller
[    1.480800] usb usb3: Manufacturer: Linux 4.10.14 xhci-hcd
[    1.486309] usb usb3: SerialNumber: f10f8000.usb3
[    1.491243] hub 3-0:1.0: USB hub found
[    1.499162] usbcore: registered new interface driver uas
[    1.504547] usbcore: registered new interface driver usb-storage
[    1.801686] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    1.972252] usb 2-1: New USB device found, idVendor=13fd, idProduct=0840
[    1.978981] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.986153] usb 2-1: Product: External
[    1.989916] usb 2-1: Manufacturer: Generic
[    2.005205] usb 2-1: SerialNumber: 503135303132313130303030
[    2.011090] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.017286] scsi host2: usb-storage 2-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    0.000000] Kernel command line: rootdelay=5 root=/dev/sda1 rootfstype=ext4 rw init=/sbin/init console=ttyS0,115200
[    3.050556] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    3.058501] sd 2:0:0:0: [sda] Write Protect is off
[    3.063319] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.063567] sd 2:0:0:0: [sda] No Caching mode page found
[    3.068900] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.077159]  sda: sda1 sda2 sda3
[    3.080510] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    3.089782]  sda: sda1 sda2 sda3
[    3.093149] sda: p3 size 91014960 extends beyond EOD, truncated
[    3.100051] sd 2:0:0:0: [sda] Attached SCSI disk
[    7.455790] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.966764] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.974990] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.981988] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.987061] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.202911] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.211137] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.218143] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.218148] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.274111] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.282626] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.290819] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.295898] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.313724] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.321949] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.328942] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.334022] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.422294] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[   10.553655] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.726053] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

ValCher1961 commented May 6, 2017

Here's the output from nucleus 4.10 X

root@wrt3200acm:~# dmesg |grep -i usb
[    0.130887] usbcore: registered new interface driver usbfs
[    0.130913] usbcore: registered new interface driver hub
[    0.130934] usbcore: registered new device driver usb
[    1.264440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.279603] orion-ehci f1058000.usb: EHCI Host Controller
[    1.285106] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.292748] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.321685] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.327710] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.334541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.341796] usb usb1: Product: EHCI Host Controller
[    1.346693] usb usb1: Manufacturer: Linux 4.10.14 ehci_hcd
[    1.352201] usb usb1: SerialNumber: f1058000.usb
[    1.357059] hub 1-0:1.0: USB hub found
[    1.365122] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.370531] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.378110] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.386687] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.392531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.399352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.406614] usb usb2: Product: xHCI Host Controller
[    1.411510] usb usb2: Manufacturer: Linux 4.10.14 xhci-hcd
[    1.417020] usb usb2: SerialNumber: f10f8000.usb3
[    1.421956] hub 2-0:1.0: USB hub found
[    1.429803] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.435214] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.442771] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.461827] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.468643] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.475903] usb usb3: Product: xHCI Host Controller
[    1.480800] usb usb3: Manufacturer: Linux 4.10.14 xhci-hcd
[    1.486309] usb usb3: SerialNumber: f10f8000.usb3
[    1.491243] hub 3-0:1.0: USB hub found
[    1.499162] usbcore: registered new interface driver uas
[    1.504547] usbcore: registered new interface driver usb-storage
[    1.801686] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    1.972252] usb 2-1: New USB device found, idVendor=13fd, idProduct=0840
[    1.978981] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.986153] usb 2-1: Product: External
[    1.989916] usb 2-1: Manufacturer: Generic
[    2.005205] usb 2-1: SerialNumber: 503135303132313130303030
[    2.011090] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.017286] scsi host2: usb-storage 2-1:1.0
root@wrt3200acm:~#
root@wrt3200acm:~# dmesg |grep -i sda
[    0.000000] Kernel command line: rootdelay=5 root=/dev/sda1 rootfstype=ext4 rw init=/sbin/init console=ttyS0,115200
[    3.050556] sd 2:0:0:0: [sda] 117231407 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    3.058501] sd 2:0:0:0: [sda] Write Protect is off
[    3.063319] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.063567] sd 2:0:0:0: [sda] No Caching mode page found
[    3.068900] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.077159]  sda: sda1 sda2 sda3
[    3.080510] sda: p3 size 91014960 extends beyond EOD, enabling native capacity
[    3.089782]  sda: sda1 sda2 sda3
[    3.093149] sda: p3 size 91014960 extends beyond EOD, truncated
[    3.100051] sd 2:0:0:0: [sda] Attached SCSI disk
[    7.455790] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    9.966764] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[    9.974990] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[    9.981988] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[    9.987061] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.202911] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.211137] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.218143] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.218148] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.274111] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.282626] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.290819] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.295898] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.313724] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
[   10.321949] sd 2:0:0:0: [sda] tag#0 Sense Key : 0x4 [current] [descriptor]
[   10.328942] sd 2:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x0
[   10.334022] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   10.422294] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
[   10.553655] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.726053] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 6, 2017

This let's postpone until tomorrow. :)

ValCher1961 commented May 6, 2017

This let's postpone until tomorrow. :)

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 6, 2017

Owner

Thanks for testing 😃

Owner

Chadster766 commented May 6, 2017

Thanks for testing 😃

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 6, 2017

Hi @Chadster766
I have installed a clean Debian and installed the kernel modules to the new disk. I have no problem with USB2 and USB3 system starts with any of them.
There is a problem with the file ".config", please check it out, because there is an error.
root@wrt3200acm:~# dmesg |grep f1034000

[   10.383924] mvneta f1034000.ethernet eth1: Using random mac address d6:bf:0e:8e:bc:c0
[   10.392227] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   10.399656] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   10.511117] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   10.518590] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   11.590428] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   11.597878] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   14.143947] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   14.151383] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   15.898863] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   15.906335] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   16.101243] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   16.108718] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   16.748633] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   16.756123] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   17.921628] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off

ValCher1961 commented May 6, 2017

Hi @Chadster766
I have installed a clean Debian and installed the kernel modules to the new disk. I have no problem with USB2 and USB3 system starts with any of them.
There is a problem with the file ".config", please check it out, because there is an error.
root@wrt3200acm:~# dmesg |grep f1034000

[   10.383924] mvneta f1034000.ethernet eth1: Using random mac address d6:bf:0e:8e:bc:c0
[   10.392227] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   10.399656] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   10.511117] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   10.518590] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   11.590428] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   11.597878] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   14.143947] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   14.151383] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   15.898863] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   15.906335] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   16.101243] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   16.108718] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   16.748633] mvneta f1034000.ethernet eth1: [0]: could not detect attached switch
[   16.756123] mvneta f1034000.ethernet eth1: [0]: couldn't create dsa switch instance (error -22)
[   17.921628] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 6, 2017

Owner

No that's by design since McDebian my default doesn't use the DSA switch.

Owner

Chadster766 commented May 6, 2017

No that's by design since McDebian my default doesn't use the DSA switch.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 6, 2017

Owner

Thanks for confirming that the USB3 issue I'm having is related to the usbkey I'm using.

Owner

Chadster766 commented May 6, 2017

Thanks for confirming that the USB3 issue I'm having is related to the usbkey I'm using.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 6, 2017

Always happy to help :)

ValCher1961 commented May 6, 2017

Always happy to help :)

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 7, 2017

Owner

My WRT3200ACM average temperature is:

CPU:          +76.5 C

In a cool location it's gone as high as:

DDR: +53.9 C WIFI: +55.9 C CPU: +87.5 C
Owner

Chadster766 commented May 7, 2017

My WRT3200ACM average temperature is:

CPU:          +76.5 C

In a cool location it's gone as high as:

DDR: +53.9 C WIFI: +55.9 C CPU: +87.5 C
@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 8, 2017

I have average temperature 75 C with fan, probably this is my CPU.

ValCher1961 commented May 8, 2017

I have average temperature 75 C with fan, probably this is my CPU.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 8, 2017

Owner

I checked a WRT1200AC and the temps were down around 55 C. The only cpu difference between the two is the WRT1200AC runs at 1.3Ghz and the WRT3200ACM at 1.8Ghz.

Owner

Chadster766 commented May 8, 2017

I checked a WRT1200AC and the temps were down around 55 C. The only cpu difference between the two is the WRT1200AC runs at 1.3Ghz and the WRT3200ACM at 1.8Ghz.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 8, 2017

Yes, all determines the frequency.
image
And here, temperature.
image

ValCher1961 commented May 8, 2017

Yes, all determines the frequency.
image
And here, temperature.
image

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 8, 2017

Still, in the table. 52 are Typ values of voltages, so, in the case of small deviations from these values within the normal range may vary and power dissipation.

ValCher1961 commented May 8, 2017

Still, in the table. 52 are Typ values of voltages, so, in the case of small deviations from these values within the normal range may vary and power dissipation.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 8, 2017

Owner

That's for the info 😃

It looks like the maximum safe temperature for these CPUs is 115 C.

Owner

Chadster766 commented May 8, 2017

That's for the info 😃

It looks like the maximum safe temperature for these CPUs is 115 C.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 8, 2017

But this extreme:)

ValCher1961 commented May 8, 2017

But this extreme:)

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 8, 2017

On the processor you can brew a cup of coffee:)

ValCher1961 commented May 8, 2017

On the processor you can brew a cup of coffee:)

@Chadster766 Chadster766 changed the title from armada-385-linksys-rango to armada-385-linksys-rango discussion May 10, 2017

@Chadster766 Chadster766 changed the title from armada-385-linksys-rango discussion to WRT3200ACM discussion May 10, 2017

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 May 23, 2017

Hi, @Chadster766
Good news, sera joined Rango with Armada-385-Linksys.dtsi and soon will be officially in kernel 4.12.

By the way, you've changed the subject correctly, and now it can all bring common interests and questions related to wrt3200.

ValCher1961 commented May 23, 2017

Hi, @Chadster766
Good news, sera joined Rango with Armada-385-Linksys.dtsi and soon will be officially in kernel 4.12.

By the way, you've changed the subject correctly, and now it can all bring common interests and questions related to wrt3200.

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 May 23, 2017

Owner

@ValCher1961 thanks for the dts notice. I'm really curious of any DTS changes Sera may have made.

Owner

Chadster766 commented May 23, 2017

@ValCher1961 thanks for the dts notice. I'm really curious of any DTS changes Sera may have made.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Jul 7, 2017

Hi @Chadster766!
You installed a new mwlwifi driver on wrt3200, did you have any warnings? - kaloz/mwlwifi#186

ValCher1961 commented Jul 7, 2017

Hi @Chadster766!
You installed a new mwlwifi driver on wrt3200, did you have any warnings? - kaloz/mwlwifi#186

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Jul 7, 2017

Owner

Hi @ValCher,

No warnings.

Owner

Chadster766 commented Jul 7, 2017

Hi @ValCher,

No warnings.

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Jul 7, 2017

Oh, I don't know what to think, I've got a warning on the kernel-4.11 and 4.12, and at the end the system hangs, and the kernel-4.9 only warns, but the system continues to work.
Maybe with the root file system, try to reinstall Debian,

ValCher1961 commented Jul 7, 2017

Oh, I don't know what to think, I've got a warning on the kernel-4.11 and 4.12, and at the end the system hangs, and the kernel-4.9 only warns, but the system continues to work.
Maybe with the root file system, try to reinstall Debian,

@ValCher1961

This comment has been minimized.

Show comment
Hide comment
@ValCher1961

ValCher1961 Jul 7, 2017

Here's another message - kaloz/mwlwifi#189

ValCher1961 commented Jul 7, 2017

Here's another message - kaloz/mwlwifi#189

@Chadster766

This comment has been minimized.

Show comment
Hide comment
@Chadster766

Chadster766 Jul 7, 2017

Owner

For testing fire up McDebian firmware and rootfs to confirm the issue exists there two because I can't seem to replicate the issue with my wireless setup.

Owner

Chadster766 commented Jul 7, 2017

For testing fire up McDebian firmware and rootfs to confirm the issue exists there two because I can't seem to replicate the issue with my wireless setup.

@Chadster766 Chadster766 changed the title from WRT3200ACM discussion to [Discussion] WRT3200ACM Jul 29, 2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment