OpenStack is an Infrastructure as a Service (IaaS) platform that allows you to create and manage virtual environments. Chameleon provides an installation of OpenStack Rocky using the KVM virtualization technology at the KVM@TACC site. Since the KVM hypervisor is used on this cloud, any virtual machines you upload must be compatible with KVM.
This documentation provide basic information about how to use the OpenStack web interface and provides some information specific to using OpenStack KVM on Chameleon. The interface is similar to the bare metal sites CHI@TACC and CHI@UC. However, the resources that you are using are virtual, rather than being tied to physical nodes. Familiarity with some concepts, such as :ref:`gui-key-pairs` are also required for KVM.
The old KVM-2015@TACC is now deprecated.
Work with KVM using the GUI
After a successful log in, you will see the Overview page as shown below. This page provides a summary of your current and recent usage and provides links to various other pages. Most of the tasks you will perform are done via the menu on the lower left and will be described below. One thing to note is that on the left, your current project is displayed. If you have multiple Chameleon projects, you can change which of them is your current project. All of the information displayed and actions that you take apply to your current project. So in the screen shot below, the quota and usage apply to the current project you have selected and no information about your other projects is shown.
Managing Virtual Machine Instances
One of the main activities you’ll be performing in the GUI is management of virtual machines, or instances. Go to Project > Compute > Instances in the navigation sidebar. For instances that you have running, you can click on the name of the instance to get more information about it and to access the VNC interface to the console. The dropdown menu to the right of the instance lets you perform a variety of tasks such as suspending, terminating, or rebooting the instance.
To launch an Instance, click the Launch Instance button. This will open the Launch Instance dialog.
On the Details tab, provide a name for this instance (to help you identify instances that you are running).
Next, go to the Source tab to select media to launch.
Select the Boot Source of the instance, which is either an Image, an Instance Snapshot (an image created from a running virtual machine), a Volume (a persistent virtual disk that can be attached to a virtual machine), or a "Volume Snapshot". If you select "Image" as the Boot Source, the Image Name dropdown presents a list of virtual machine images that we have provided, that other Chameleon users have uploaded and made public, or images that you have uploaded for yourself. If you select Boot from snapshot, the Instance Snapshot dropdown presents a list of virtual machine images that you have created from your running virtual machines.
Go to the Flavor Tab and select the amount of resources (Flavor) to allocate to the instance.
Flavors refer to the virtual machine's assigned memory and and disk size. Different images and snapshots may require a larger Flavor. For example, the
CC-CentOS7 image requires at least an
If you select different flavors from the Flavor dropdown, their characteristics are displayed on the right.
When you are finished with this step, go to the Key Pair Tab.
Select an SSH keypair that will be inserted into your virtual machine. You will need to select a keypair here to be able to access an instance created from one of the public images Chameleon provides. These images are not configured with a default root password and you will not be able to log in to them without configuring an SSH key.
Then, go to the Security Groups Tab.
If you have previously defined Security Groups, you may select them here. Alternatively, you can configure them later.
Set up network using Network tab.
Select which network should be associated with the instance. Click the Up arrow next to your project’s private network (PROJECT_NAME-net), not
Now you can launch your instance by clicking on the Launch button and the Instances page will show progress as it starts.
Associating a Floating IP Address
You may assign a Floating IP Address to your Instance by selecting Associate Floating IP in the dropdown menu next to your Instance on the Instances page.
Security Groups allow you to specify what inbound and outbound traffic is allowed or blocked to Instances. Unlike the CHI@TACC and CHI@UC bare metal sites, KVM@TACC observes Security Groups for Instances.
By default, all inbound traffic is blocked to KVM@TACC Instances, including SSH. You must apply a Security Group that allows TCP port 22 inbound to access your instance via SSH.
To create a Security Group, click Projects > Network > Security Groups in the navigation side bar.
Click the +Create Security Group button to open the Create Security Group page.
Enter a Name for your Security Group, and optionally provide a Description. Then click the Create Security Group button. Now, you should see your Security Group listed on the Access and Security page.
Click the Manage Rules button in the Action column to open the Manage Security Group Rules page.
The default Security Group allows outbound IPv4 and IPv6 traffic for Any IP Protocol and Port Range. If no entry for Ingress, no inbound traffic will be allowed. You may add an additional rule by clicking on the +Add Rule to open the Add Rule dialog.
In this dialog, you can specify Custom TCP Rule (or Custom UDP Rule or Custom ICMP Rule), a Direction (Ingress for inbound traffic to your Instance or Egress for outbound traffic) and a Port. Alternatively, you can use a pre-defined rule in the Rule dropdown, such as SSH. when you are finished, click Add.
Adding a Security Group to an Instance
Once you have defined a Security Group, you may apply it to an Instance by clicking Project > Compute > Instances in the navigation sidebar and clicking the Edit Security Groups option in the Actions dropdown.
The Security Groups tab in the Edit Instance dialog will pop up.
You may click the + button next to the Security Group you wish to apply in the All Security Groups list on the left. Once you are finished, click Save to finish the process.
Work with KVM using the CLI
For general information on CLI authentication and use, please see the command-line-interface section.
Uploading qcow2 images to raw format for better instance launch performance
KVM images are stored on our Ceph cluster, which is able to serve raw images much faster than qcow2 for instance launches. Openstack includes the experimental command Glance image-create-via-import, which allows uploading of images in various standard formats including qcow2 to then be automatically converted to raw in the backend.
Next, issue the following command:
glance image-create-via-import --container-format bare --disk-format qcow2 --file </path/to/image> --name <image name>
Details and other options for this command are available via the Glance image-create-via-import documentation.
Glance image-create-via-import is currently unable to handle conversion of iso images to raw.
Alternatively, you may convert qcow2 images to raw format before upload. qemu-img is one tool that is able to this with the following command:
qemu-img convert -f qcow2 -O raw <original.qcow2> <converted.img>
Once converted, use glance to upload the image:
openstack image create --file </path/to/converted.img> --disk-format raw <image-name>
Details and other options for this command are available within Openstack documentation.