VectorMod

VectorMod is a dual triggered one-shot or cycling modulation source based on Vector Oscillator waveforms. There is a variety of built-in waveforms from which to choose, or you can create your own with the Waveform Editor.

Controls

• Digital Ins: A trigger at each input starts the corresponding Modulator
• CV Ins: A high signal (gate) at each input causes the corresponding Modulator to cycle
• Outputs: Output A/C is bi-polar the signal for Mod 1, and Output B/D is the bi-polar signal for Mod 2
• Encoders: Push to alternate the cursor between Mod 1 frequency, Mod 1 waveform select, Mod 2 frequency and Mod 2 waveform select

The speed of the Modulator is determined with a single frequency control. The higher the frequency, the faster the Modulator will run.

VectorMod is in Hemisphere Suite starting with v1.6.