Skip to content
For this project, I upgraded a 6V Lamborghini Power Wheel to a 12V and added traction control. The traction control is using an ESP8266 for the controller.
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
PowerWheel
LICENSE
README.md

README.md

Traction-Control-Lamborghini-Power-Wheel

For this project, I upgraded a 6V Lamborghini Power Wheel to a 12V and added traction control. The traction control is using an ESP8266 for the controller.

Watch the complete project here: https://youtu.be/sQc1SC60owo

Open the "PowerWheel.ino" to begin. Using Arduino 1.8.5 IDE. Under Tools->Board: select "NodeMCU 1.0(ESP-12E Module)"

If the NodeMCU is not available then follow these instructions: https://learn.sparkfun.com/tutorials/esp8266-thing-hookup-guide/installing-the-esp8266-arduino-addon

You can’t perform that action at this time.