Skip to content
Browse files

system: Update prebuilt kernel/wifi

Changes:
netfilter: qtaguid: initialize a local var to keep compiler happy.
netfilter: xt_qtaguid: fix ipv6 protocol lookup
lib: Introduce some memory copy macros and functions
lib/sha1: use the git implementation of SHA-1
arm: remove "optimized" SHA1 routines
binder: Quiet binder
arm: Allow CPU-supported unaligned accesses
[PATCH v1] tegra: remove the clock sleepable WARNING
unlikely-likely cleanups & optimizations
arm: remove stale export of 'sha_transform'
lib/crc: add slice by 8 algorithm to crc32.c
ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
defconfig: ics: set ALLOW_CPU_ALIGNMENT
ARM: cache-v7: Disable preemption when reading CCSIDR (no tracing)
cpufreq interactive governor: event tracing
cpufreq: interactive: Choose greater of short-term load or long-term load
cpufreq: interactive: apply intermediate load to max speed not current
cpufreq: interactive: set at least hispeed when above hispeed load
cpufreq: interactive: don't drop speed if recently at higher load
cpufreq: interactive: configurable delay before raising above hispeed
cpufreq: interactive: adjust code and documentation to match
cpufreq: interactive: based hispeed bump on target freq, not actual
cpufreq: Separate speed target revalidate time and initial set time
cpufreq: interactive: reduce DEFAULT_MIN_SAMPLE_TIME and DEFAULT_TIMER_RATE
cpufreq: interactive: remove cpufreq_interactive_get_target, boost_factor, and sustain_load
cpufreq: interactive: Boost frequency on touchscreen input
cpufreq: interactive: remove unused target_validate_time_in_idle
cpufreq: interactive: enable input_boost (touchscreen)
ARM: fix rcu stalls on SMP platforms
ARM: add irq_enter/exit() around an additional ipi_timer()
ARM: SMP: use a timing out completion for cpu hotplug
Revert "touchscreen: atmel_mxt1386: remove set_mode_for_ta from conditional (in resume)"
Revert "touchscreen: atmel_mxt1386: add mxt_fhe_worker from GSII (I-9100), Update 4"
Revert "touchscreen: atmel_mxt1386: backport/sync mxt_ta_worker from I-9100 (GSII), Update 4"
Revert "touchscreen: atmel_mxt1386: re-enable MXT_FACTORY_TEST and ENABLE_NOISE_TEST_MODE"
Revert "touchscreen: atmel_mxt1386: bring back mxt_early/late_suspend/resume"
Revert "touchscreen: atmel_mxt1386: add back in mxt_suspend if not EARLYSUSPEND"
Revert "atmel_mxt1386: Add new mXT1386 touchscreen driver"
touchscreen: atmel_mxt1386: backport/sync with GSII (I-9100), Update 4
tegra: board-p4*: add in parameters for atmel_mxt1386
wireless: bcmdhd: set EXAMPLE_TABLE
cpufreq: interactive: Add sysfs boost interface for hints
cpufreq: interactive: set floor for boosted speed
Revert "cpufreq: interactive: enable input_boost (touchscreen)"
Revert "defconfig: ics: set ALLOW_CPU_ALIGNMENT"
Revert "wireless: bcmdhd: set EXAMPLE_TABLE"
Revert "wireless: bcmdhd: import wlan_gpio from bcm4330, remove OOB_INTR_ONLY and add RDWR_MACADDR (to BCM4330)"
Revert "wireless: bcmdhd: import bcmdhd from I-9100 (GSII) Update 4"
wireless: import bcmdhd (5.90.195.61) from kcrudup's ics-2.6.39
wireless: bcmdhd: bring in some things for operability
wireless: bcmdhd: add in custom SAMSUNG code/logic/flags
defconfig: ics: enable BCMDHD
wireless: bcmdhd: set EXAMPLE_TABLE
wireless: bcmdhd: remove CONFIG_CONTROL_PM
net: wireless: bcmdhd: Avoid turning radio UP twice on start
defconfig: ics: set NETFILTER_XT_TARGET_TCPMSS
cpufreq: interactive: add boost pulse interface
defconfig: ics: set BCMDHD as a LKM and un-set DHD_ENABLE_P2P
bcmdhd: Fix IBSS (ad-hoc) network support
staging: android/lowmemorykiller: Don't grab tasklist_lock
staging: android/lowmemorykiller: Better mm handling
staging: android/lowmemorykiller: No need for task->signal check
staging: android/lowmemorykiller: Do not kill kernel threads
Revert "ARM: SMP: use a timing out completion for cpu hotplug"
Revert "ARM: add irq_enter/exit() around an additional ipi_timer()"
Revert "ARM: fix rcu stalls on SMP platforms"
wireless: bcmdhd: set WIFI_CONTROL_FUNC for VARIATION_TEGRA
wireless: bcmdhd: set DHD_USE_EARLYSUSPEND
wireless: bcmdhd: import SAMSUNG logic for STATIC_BUF
defconfig: ics: set DHD_USE_STATIC_BUF
netfilter: xt_IDLETIMER: Add new netlink msg type
netfilter: xt_qtaguid: start tracking iface rx/tx at low level
defconfig: ics: set NETFILTER_XT_TARGET_IDLETIMER
net: wireless: bcmdhd: Fix filtering setting in case of P2P
cpufreq: interactive: restart above_hispeed_delay at each hispeed load
cpufreq: interactive: fixup trace of string params
README: Add toolchain location for kernel builds
samsung: dpram: remove call to multipdp_exit for ICS in dpram_shutdown
build: remove O2 from AFLAGS/CFLAGS_KERNEL

Reference:
 github.com/ch33kybutt, github.com/kcrudup, github.com/arco, github.com/solarnz
 GSII (I-9100)_Update 4, bcm4330
 github.com/cyanogenmod/android_kernel_samsung_tuna
 github.com/CyanogenMod/android_kernel_samsung_aries

Change-Id: I6303a7544596024685a96ccd5ed5f5d0985ed855
  • Loading branch information...
1 parent e488aef commit 161fdb2d7aeff94907907b5b156638be30bfbd2f @pershoot pershoot committed May 15, 2012
View
BIN kernel
Binary file not shown.
View
BIN modules/bcmdhd.ko
Binary file not shown.
View
BIN modules/cifs.ko
Binary file not shown.
View
BIN modules/dhd.ko
Binary file not shown.
View
BIN modules/ntfs.ko
Binary file not shown.
View
2 p4vzw.mk
@@ -22,7 +22,7 @@ PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/modules/dhd.ko:system/lib/modules/dhd.ko \
+ $(LOCAL_PATH)/modules/bcmdhd.ko:system/lib/modules/bcmdhd.ko \
$(LOCAL_PATH)/modules/cifs.ko:system/lib/modules/cifs.ko \
$(LOCAL_PATH)/modules/ntfs.ko:system/lib/modules/ntfs.ko

0 comments on commit 161fdb2

Please sign in to comment.
Something went wrong with that request. Please try again.