msm8992-bullhead.dtsi

/* Copyright (c) 2015, LGE Inc. All rights reserved.
 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "msm8992-bullhead-pinctrl.dtsi"

/ {
	aliases {
		spi1 = &spi_fpc;
		spi7 = &spi_7;
		i2c9 = &i2c_9;
	};
};

&soc {
	qcom,qseecom@5100000 {
		reg = <0x5100000 0x1900000>;
	};

	spi_fpc: spi_fpc@f9966000{
		status = "ok";
		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;
		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";
		reg = <0xf9966000 0x1000>, <0xf9944000 0x19000>;

		interrupt-names = "spi_irq", "spi_bam_irq";
		interrupts = <0 104 0>, <0 239 0>;

		spi-max-frequency = <5000000>;

		qcom,master-id = <84>;
		clock-names = "iface_clk", "core_clk";
		clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,
			<&clock_gcc clk_gcc_blsp2_qup4_spi_apps_clk>;

		qcom,gpio-mosi = <&msm_gpio 53 0>;
		qcom,gpio-miso = <&msm_gpio 54 0>;

		qcom,infinite-mode = <0>;
		qcom,use-bam;
		qcom,ver-reg-exists;
		qcom,bam-consumer-pipe-index = <18>;
		qcom,bam-producer-pipe-index = <19>;
		qcom,shared;

	};

	spi_7: spi@f9963000 {
		status = "ok";
		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;
		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";
		reg = <0xf9963000 0x1000>, <0xf9944000 0x19000>;

		interrupt-names = "spi_irq", "spi_bam_irq";
		interrupts = <0 101 0>, <0 239 0>;

		spi-max-frequency = <25000000>;

		qcom,use-bam;
		qcom,bam-consumer-pipe-index = <12>;
		qcom,bam-producer-pipe-index = <13>;

		pinctrl-names = "spi_default", "spi_sleep";
		pinctrl-0 = <&spi7_default &spi7_cs_active>;
		pinctrl-1 = <&spi7_sleep &spi7_cs_sleep>;
		clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,
			<&clock_gcc clk_gcc_blsp2_qup1_spi_apps_clk>;
		clock-names = "iface_clk", "core_clk";

		qcom,use-pinctrl;
		qcom,infinite-mode = <0>;
		qcom,ver-reg-exists;
		qcom,master-id = <84>;
	};

	i2c_9: i2c@f9965000 {
		compatible = "qcom,i2c-msm-v2";
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		reg-names = "qup_phys_addr", "bam_phys_addr";
		reg = <0xf9965000 0x1000>,
		      <0xf9944000 0x19000>;
		interrupt-names = "qup_irq", "bam_irq";
		interrupts = <0 103 0>, <0 239 0>;
		qcom,clk-freq-out = <1000000>;
		qcom,clk-freq-in  = <19200000>;
		qcom,disable-dma;
		clock-names = "iface_clk", "core_clk";
		clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,
		         <&clock_gcc clk_gcc_blsp2_qup3_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";
		pinctrl-0 = <&i2c_9_active>;
		pinctrl-1 = <&i2c_9_sleep>;
		qcom,noise-rjct-scl = <0>;
		qcom,noise-rjct-sda = <0>;
		qcom,bam-pipe-idx-cons = <16>;
		qcom,bam-pipe-idx-prod = <17>;
		qcom,master-id = <84>;
	};

	qcom,cnss {
		wlan-bootstrap-gpio = <&msm_gpio 1 0>;
	};

	sound {
		/delete-property/ pinctrl-0;
		/delete-property/ pinctrl-1;
		/delete-property/ pinctrl-2;
		/delete-property/ pinctrl-3;
		pinctrl-0 = <&sec_aux_pcm_sleep>, <&sec_aux_pcm_din_sleep>;
		pinctrl-1 = <&sec_aux_pcm_active>, <&sec_aux_pcm_din_active>;
		pinctrl-2 = <&sec_aux_pcm_sleep>, <&sec_aux_pcm_din_sleep>;
		pinctrl-3 = <&sec_aux_pcm_active>, <&sec_aux_pcm_din_active>;
	};
};

&dfps_data_mem {
	status = "disabled";
};

&cont_splash_mem {
	reg = <0 0x03400000 0 0xc00000>;
};

&removed_regions {
	reg = <0 0x05000000 0 0x2200000>;
};

&modem_mem {
	reg = <0 0x09000000 0 0x6400000>;
};

&blsp1_uart2 {
	status= "ok";
};

&spi_0 {
	status = "disabled";
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-1;
};

&tspp {
	status = "disabled";
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-1;
	/delete-property/ pinctrl-2;
	/delete-property/ pinctrl-3;
	/delete-property/ pinctrl-4;
	/delete-property/ pinctrl-5;
	/delete-property/ pinctrl-6;
};

&cti6 {
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
};

&cti8 {
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
};

&usb3 {
	status = "ok";
	qcom,usbin-vadc = <&pmi8994_vadc>;
	qcom,internal-chg-detect;

	dwc3@f9200000 {
		maximum-speed = "high-speed";
		no-set-vbus-power;
	};
};

&hsphy0 {
	status = "ok";
	qcom,hsphy-init-host = <0x00D191A4>;
	qcom,hsphy-init = <0x00D1D9A4>;
	qcom,charger = <&pmi8994_charger>;
};

&ssphy0 {
	status = "ok";
};

&sdhc_1 {
	vdd-supply = <&pm8994_l20>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <200 570000>;

	vdd-io-supply = <&pm8994_s4>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 172000000 344000000>;
	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
	qcom,nonremovable;
	status = "ok";
};

&pm8994_vadc {
	chan@5 {
		label = "vcoin";
		reg = <5>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};

	chan@7 {
		label = "vph_pwr";
		reg = <7>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};

	chan@39 {
		label = "usb_id_lv";
		reg = <0x39>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <5>;
		qcom,fast-avg-setup = <0>;
	};

	chan@72 {
		label = "xo_therm";
		reg = <0x72>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <4>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		status = "ok";
	};

	chan@73 {
		label = "msm_therm";
		reg = <0x73>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		status = "disabled";
	};

	chan@74 {
		label = "emmc_therm";
		reg = <0x74>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		status = "disabled";
	};

	chan@75 {
		label = "pa_therm0";
		reg = <0x75>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
	};

	chan@76 {
		label = "pcb_rev";
		reg = <0x76>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <1>;
		qcom,fast-avg-setup = <0>;
	};
};

&pm8994_adc_tm {
	chan@72 {
		label = "xo_therm";
		reg = <0x72>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <4>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x72>;
		status = "ok";
	};

	chan@73 {
		label = "msm_therm";
		reg = <0x73>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x48>;
		qcom,thermal-node;
		status = "disabled";
	};

	chan@74 {
		label = "emmc_therm";
		reg = <0x74>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x68>;
		qcom,thermal-node;
		status = "disabled";
	};

	chan@75 {
		label = "pa_therm0";
		reg = <0x75>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x70>;
		qcom,thermal-node;
	};

	chan@39 {
		label = "usb_id_lv";
		reg = <0x39>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <3>;
		qcom,btm-channel-number = <0x80>;
	};
};

&pmi8994_vadc {
	chan@0 {
		label = "usbin";
		reg = <0>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};

	chan@1 {
		label = "dcin";
		reg = <1>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};

	chan@30 {
		label = "batt_therm";
		reg = <0x30>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <1>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
	};

	chan@31 {
		label = "batt_id";
		reg = <0x31>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <1>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
	};

	chan@43 {
		label = "usb_dp";
		reg = <0x43>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};

	chan@44 {
		label = "usb_dm";
		reg = <0x44>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
	};
};

&pm8994_gpios {
	gpio@c200 { /* GPIO 3 VOL_UP_N */
		qcom,mode = <0>;		/* Digital input */
		qcom,pull = <0>;		/* PULL up 30uA */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};

	gpio@c500 { /* GPIO 6 STAT_SMB1358 */
		qcom,mode = <0>;		/* Digital input */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};

	gpio@c800 { /* GPIO 9 WLAN_EXT_REG_EN */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <0>;		/* Output low */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "ok";
	};

	gpio@ce00 { /* GPIO 15 CODEC_MCLK */
		qcom,mode = <1>;		/* Digital output*/
		qcom,pull = <5>;		/* No pull */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <2>;		/* Function 1 */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
        };

	gpio@cf00 { /* GPIO 16 PMI_CLK_IN */
		qcom,mode = <1>;		/* Digital output*/
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <2>;		/* Function 1 */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
        };

	gpio@d000 { /* GPIO 17 SENSOR_HUB_OSC32 */
		qcom,mode = <1>;		/* Digital output*/
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <3>;		/* Function 2 */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};

	gpio@d100 { /* GPIO 18 WIFI_SLEEP_CLK */
		qcom,mode = <1>;		/* Digital output */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,out-strength = <2>;	/* Medium */
		qcom,src-sel = <3>;		/* Function 2 */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "ok";
	};

	gpio@d200 { /* GPIO 19 BT_POWER_ON */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <0>;		/* Output low */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "ok";
	};

	gpio@d300 { /* GPIO 20 PMI_SPON */
		qcom,mode = <0>;		/* Digital input */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <2>;		/* Function 1 */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "ok";
	};
};

&pm8994_mpps {
	mpp@a200 { /* MPP 3 VREF_DAC_MPP_3 */
		qcom,mode = <5>;		/* Analog output */
		qcom,invert = <1>;		/* Enable */
		qcom,master-en = <1>;		/* Enable */
		qcom,aout-ref = <0>;		/* 1.25v */
		status = "ok";
        };

	mpp@a400 { /* MPP 5 SMB1358_VCHG */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <1>;		/* Enable */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};

	mpp@a500 { /* MPP 6 LPDDR4_VSEL */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <1>;		/* Enable */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
        };
};

&pmi8994_gpios {
	gpio@c100 { /* GPIO 2 BOOST_BYP_BYP */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <1>;		/* Invert */
		qcom,pull = <5>;		/* No pull */
		qcom,vin-sel = <2>;		/* Voltage value 1.8v */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};
};

&pmi8994_mpps {
	mpp@a100 { /* MPP 2 FLASH_STROBE_TRIG */
		qcom,mode = <0>;		/* Digital input */
		qcom,invert = <1>;		/* Enable */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};

	mpp@a200 { /* MPP 3 PMI_PON */
		qcom,mode = <1>;		/* Digital output */
		qcom,invert = <1>;		/* Enable */
		qcom,master-en = <1>;		/* Enable */
		status = "ok";
	};
};

&blsp2_uart2 {
	status = "ok";
};

&usb_otg_switch {
	status = "disabled";
};

#include "msm8992-lge.dtsi"
#include "msm8992-bullhead-regulator.dtsi"
#include "msm8992-bullhead-camera.dtsi"
#include "msm8992-bullhead-connectivity.dtsi"
#include "msm8992-bullhead-misc.dtsi"
#include "msm8992-bullhead-panel.dtsi"
#include "msm8992-bullhead-pm.dtsi"
#include "msm8992-bullhead-sound.dtsi"
#include "msm8992-bullhead-touch.dtsi"
#include "msm8992-bullhead-sensorhub.dtsi"