Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Felicity not working - ER07 - X or Y switch broken #1118

jackie1050 opened this issue Apr 27, 2019 · 1 comment


None yet
1 participant
Copy link

commented Apr 27, 2019

Switched on Felicity and chose print. Heated up OK, but then print head crashed straight into back left corner, error message 'ERROR - STOPPED X or Y switch broken' Go to:' (there is a list of actions to try here, will take a look in a bit).


This comment has been minimized.

Copy link
Contributor Author

commented Apr 27, 2019

One of the wires was broken where it was connected to the microswitch on the left. I resoldered and heatshrunk it (needed to take the side off the printer for access). It appears to be working OK now.

@jackie1050 jackie1050 closed this Apr 27, 2019

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.