Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Gerald not cutting or engravin on full power #1174

Closed
jackie1050 opened this issue Jul 8, 2019 · 3 comments

Comments

@jackie1050
Copy link
Contributor

commented Jul 8, 2019

Yesterday evening Gerald was working as normal e.g. I was able to cut a box from poplar sheet, but then it was suddenly a lot weaker when Rob tried to cut something. We tried poplar again but it couldn't even cut that.

@amcewen

This comment has been minimized.

Copy link
Member

commented Jul 8, 2019

It seems to be an alignment problem - Graham is in trying to do some cutting today and we tried removing the air-assist nozzle to see if that improved things and it started cutting fine.

Checking with come masking tape, the last mirror seemed way out. Graham is realigning it.

@gbowman85

This comment has been minimized.

Copy link

commented Jul 8, 2019

I've realigned it and it's cutting well now!

@amcewen

This comment has been minimized.

Copy link
Member

commented Jul 8, 2019

Thanks @gbowman85! You should be added to the DoES Liverpool organisation on github now (or at least have had an invite to it) so feel free to close this issue down (that'll let you confirm I've added you correctly :-D)

@gbowman85 gbowman85 closed this Jul 8, 2019

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
3 participants
You can’t perform that action at this time.