Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Mirror in non-accessible toilet needs a shelf #1202

Closed
johnmckerrell opened this issue Aug 5, 2019 · 2 comments

Comments

@johnmckerrell
Copy link
Member

commented Aug 5, 2019

Shelf should be 500x120mm. The shelf that came with it was 4mm thick but I don't think 4mm perspex will be sturdy enough.

@johnmckerrell

This comment has been minimized.

Copy link
Member Author

commented Aug 6, 2019

I've cut this from 10mm clear acrylic. It's just a tad too wide (on the shortest dimension) which means it rests on top of something it's meant to sit next to but I doubt anyone would actually notice. I had to cut twice on power 4 to get all the way through. Design is in somewhere-safe/designs/toilets/mirror-shelf.*

@johnmckerrell

This comment has been minimized.

Copy link
Member Author

commented Aug 7, 2019

Following a suggestion by @jackie1050 I've cut a second of these for the accessible toilet so that both rooms match and we don't have a risk of glass breakage. I didn't change the design at all but I've found that I can squeeze it in so that it's not resting on anything.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
1 participant
You can’t perform that action at this time.