New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

stop the print bed moving about during printing on Prince Adam #532

Closed
DefProc opened this Issue Jul 11, 2017 · 1 comment

Comments

@DefProc

DefProc commented Jul 11, 2017

The glass bed is not being held in place during printing, and is moving sideways during printing, and causing higher print layers to be increasingly offset.

It looks like this is caused by the rear glass clips being gradually pushed back during usage (especially when scraping a job from the bed).

@DefProc

This comment has been minimized.

Show comment
Hide comment
@DefProc

DefProc Jul 11, 2017

Fixed by bending them back to correctly clamp the glass plate, for both Prince Adam, and Felicity.

At the same time, I've also washed and re-prit-stick'd the build plates, and vacuumed them out.

DefProc commented Jul 11, 2017

Fixed by bending them back to correctly clamp the glass plate, for both Prince Adam, and Felicity.

At the same time, I've also washed and re-prit-stick'd the build plates, and vacuumed them out.

@DefProc DefProc closed this Jul 11, 2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment