New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Print some more tube clips for the UM2s #533

Closed
DefProc opened this Issue Jul 11, 2017 · 3 comments

Comments

Projects
None yet
2 participants
@DefProc

DefProc commented Jul 11, 2017

In changing the filaments in the last week, it looks like the custom printed clip (#402) for the UM2 extended (Prince Adam) has got misplaced. Rather than just print one, I've just set off a print to make a set of replacements (both large and original size), so there are a few in case this happens again.

@DefProc DefProc changed the title from Replace to Print some more tube clips for the UM2s Jul 11, 2017

@DefProc DefProc self-assigned this Jul 11, 2017

@DefProc

This comment has been minimized.

Show comment
Hide comment
@DefProc

DefProc Jul 11, 2017

Printed, fitted 2 and placed the rest in the "Ultimaker Parts" box. There are 5 each of the standard and increased thickness versions, all in orange.

DefProc commented Jul 11, 2017

Printed, fitted 2 and placed the rest in the "Ultimaker Parts" box. There are 5 each of the standard and increased thickness versions, all in orange.

@DefProc DefProc closed this Jul 11, 2017

@DefProc

This comment has been minimized.

Show comment
Hide comment
@DefProc

DefProc Jul 13, 2017

We've just lost another pair of these from the printers (on the head end, one from each printer) @amcewen and I have now replaced them, so we're down to 4 of each size.

As we've had a few new users on the 3D printers over the last week or so, I'm wondering if this is a training issue. Although it's probably good that we can print replacements, as the actual cost to replace is negligible.

DefProc commented Jul 13, 2017

We've just lost another pair of these from the printers (on the head end, one from each printer) @amcewen and I have now replaced them, so we're down to 4 of each size.

As we've had a few new users on the 3D printers over the last week or so, I'm wondering if this is a training issue. Although it's probably good that we can print replacements, as the actual cost to replace is negligible.

@huffeec

This comment has been minimized.

Show comment
Hide comment
@huffeec

huffeec Dec 9, 2017

@jackie1050 replaced broken one today (head end, Gerald)

huffeec commented Dec 9, 2017

@jackie1050 replaced broken one today (head end, Gerald)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment