New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Felicity needs a new tube grip clip #633

Closed
amcewen opened this Issue Dec 20, 2017 · 2 comments

Comments

Projects
None yet
2 participants
@amcewen
Member

amcewen commented Dec 20, 2017

The orange clip to hold the tube collet in place on Felicity is the thicker type that we modified to take up more slack on Prints Adam. We need to fit a standard tube grip clip instead - https://github.com/DoESLiverpool/somewhere-safe/blob/master/Workshop/3Dprints/ultimaker_parts/Tube%20Grip%20Standard.stl

@DefProc

This comment has been minimized.

Show comment
Hide comment
@DefProc

DefProc Dec 20, 2017

Worth checking the 3D printer spares, as I did print a number (in each size) last time we needed some.

DefProc commented Dec 20, 2017

Worth checking the 3D printer spares, as I did print a number (in each size) last time we needed some.

@amcewen

This comment has been minimized.

Show comment
Hide comment
@amcewen

amcewen Dec 20, 2017

Member

Yeah, I hadn't had chance to check that when I raised the issue (and wasn't in the workshop). There are still plenty of spares, including some of the thinner ones, so I've swapped the thick one that was on Felicity with a thinner one.

Member

amcewen commented Dec 20, 2017

Yeah, I hadn't had chance to check that when I raised the issue (and wasn't in the workshop). There are still plenty of spares, including some of the thinner ones, so I've swapped the thick one that was on Felicity with a thinner one.

@amcewen amcewen closed this Dec 20, 2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment