Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Buy a new collet for Felicity #662

Closed
jackie1050 opened this issue Feb 20, 2018 · 7 comments

Comments

Projects
None yet
2 participants
@jackie1050
Copy link
Contributor

commented Feb 20, 2018

The tube coupling collet and clamp clip for Felicity are currently missing. If nobody knows where they are, there is a kit which contains both, along with a Bowden tube: https://3dgbire.com/products/bowden-tube

There are some downloads to print your own collet, but the originals have metal parts which might mean that they work better. The other parts would also be useful.

@DoESsean

This comment has been minimized.

Copy link
Contributor

commented Feb 22, 2018

@jackie1050

This comment has been minimized.

Copy link
Contributor Author

commented Mar 1, 2018

Hi Seån

As nobody else has commented, I'd say yes - this is my understanding of what's needed to get the printer working again

@DoESsean

This comment has been minimized.

Copy link
Contributor

commented Mar 1, 2018

@jackie1050

This comment has been minimized.

Copy link
Contributor Author

commented Mar 12, 2018

Ming was able to retrieve the old collet from behind one of the cupboards while we were moving stuff around this weekend, so Felicity is back in action. Leaving the issue open until we get the new one, which will be a useful spare.

@jackie1050

This comment has been minimized.

Copy link
Contributor Author

commented Apr 27, 2019

@DoESsean - Do you remember if we received the spare collet?

@DoESsean

This comment has been minimized.

Copy link
Contributor

commented Apr 30, 2019

@jackie1050

This comment has been minimized.

Copy link
Contributor Author

commented May 5, 2019

This issue was only being left open so we could document the spare, so no longer relevant.

@jackie1050 jackie1050 closed this May 5, 2019

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.