New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Make some new Gerald Rulers #752

Closed
cheapjack opened this Issue Apr 9, 2018 · 4 comments

Comments

Projects
None yet
4 participants
@cheapjack

cheapjack commented Apr 9, 2018

We need a new ruler until we get a new set of lenses for Gerald and Sophia

The orginal ruler is here so we could amend that template once we have measured up properly.

Using the tool like below gives a good cutting focus in the interim; topmost edge of tool aligned with topmost edge of the lens thread grip

gerald_new_ruler_needed

@KarlDunkerley

This comment has been minimized.

KarlDunkerley commented Apr 10, 2018

Can we do a version that is self-standing? A couple of times I tried to use the distance piece in the top left and could barely reach the up/down controls.

Given the bed is not always fully horizontal and slightly bowed, it would be useful to do the adjustment in the place on the bed where cutting is being done. It can be 2-3 diff from top left to bottom right in my experience.

This would also be useful when doing regular maintenance to check the bed is level all over At Warrington FabLab I determined that 15mm gave the most precise cut so I simply glued three 5mm acrylic pieces together to act as a simple distance piece. Very simple to use and self-standing.

@amcewen amcewen added 3 - Could DoES and removed 1 - Must DoES labels May 8, 2018

@amcewen

This comment has been minimized.

Member

amcewen commented May 8, 2018

I've dropped the priority for this, because now that #749 is fixed, the old rulers work correctly again.

However, if you want to design a self-standing version @KarlDunkerley, that'd be great. (Or feel free to close this if you're unlikely to get to it).

@KarlDunkerley

This comment has been minimized.

KarlDunkerley commented May 8, 2018

I will get this done asap. Promise!!!

Can I suggest and inaugual laser maintenance crew soon to see who is interested and do some brainstorming about the way forward?

@johnmckerrell

This comment has been minimized.

Member

johnmckerrell commented Nov 26, 2018

I counted 6 rulers in total, 2 hanging on the outside and 4 hiding just inside on the right.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment