Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Double check taping of power-brick for webcams #89

Closed
osfameron opened this issue Feb 3, 2015 · 4 comments

Comments

@osfameron
Copy link
Member

commented Feb 3, 2015

These had fallen off and were trailing on floor this morning. I've taped to side of door, but not sure that's right -- looking again, looks like it might have been taped above e.g. next to the webcams themselves?

@johnmckerrell

This comment has been minimized.

Copy link
Member

commented Feb 3, 2015

Sounds about right, the tape on the side had come off recently and I guess the weight of the cable then pulled it off above too. We should really clip this on properly.

@amcewen

This comment has been minimized.

Copy link
Member

commented Feb 14, 2015

I've swapped the six-way for a two-way, so we aren't holding so much weight up with gaffer tape. That doesn't have any screw mounting holes, but I've used lots of fresh gaffer tape. Not sure if we should leave this open though for someone to effect a better fix...

@amcewen

This comment has been minimized.

Copy link
Member

commented Apr 1, 2015

Well, the two-way seems to have lasted about 6 weeks :-/ We should find a better fix.

@johnmckerrell

This comment has been minimized.

Copy link
Member

commented Apr 2, 2015

Hammered in some cable clips, reckon that'll do the trick.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
3 participants
You can’t perform that action at this time.