Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Doorbot 4 & 5 Raspberry Pi's might be fragile #905

Closed
johnmckerrell opened this issue Sep 11, 2018 · 2 comments

Comments

@johnmckerrell
Copy link
Member

commented Sep 11, 2018

Fob access was down on the main door last night. It might have been because one of the sockets was slightly out and/or the ethernet socket was shorting the board above. We should investigate and check if there's any improvements to be made.

@johnmckerrell

This comment has been minimized.

Copy link
Member Author

commented Sep 13, 2018

Doorbot 4 is currently non-functional, both 4 & 5 are not responding to pings.

@johnmckerrell

This comment has been minimized.

Copy link
Member Author

commented Sep 13, 2018

Had a look today, both Pi boards had tape over the sockets, one has a small amount exposed so I applied new tape. The 6 pin connectors looked fine. Have now labelled them with 4 & 5.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
1 participant
You can’t perform that action at this time.