Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Gerald needs his filters cleaning #952

Closed
johnmckerrell opened this issue Oct 18, 2018 · 1 comment

Comments

@johnmckerrell
Copy link
Member

commented Oct 18, 2018

Gerald has been quite smelly recently and could do with a good vacuum.

@magman2112

This comment has been minimized.

Copy link

commented Oct 26, 2018

I gave the fan a clean just before Maker night on Thursday. The fan didn’t look too blocked, but should be improved anyway.

I did notice though that the tube from the blower to the outside was quite squashed, so repositioning this improved the airflow significantly. This tube is getting more and more fragile, in some sections there are more patches than original tube. There are still a few air leaks despite these patches, which is leaking some fumes into the Laser room.

I would suggest that we get a replacement for this tube sooner rather than later, as this will likely still be needed should we get a longer term installation of the extraction system.

@magman2112 magman2112 closed this Oct 26, 2018

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
2 participants
You can’t perform that action at this time.