Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

1250 lines (1158 sloc) 29.575 kB
# $NetBSD: rc.subr,v 1.49 2002/05/21 12:31:01 lukem Exp $
# $FreeBSD: src/etc/rc.subr,v 1.13 2003/06/09 17:31:06 mtm Exp $
# $DragonFly: src/etc/rc.subr,v 1.15 2008/04/05 08:07:11 matthias Exp $
#
# Copyright (c) 1997-2002 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Luke Mewburn.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed by the NetBSD
# Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# rc.subr
# functions used by various rc scripts
#
#
# Operating System dependent/independent variables
#
if [ "X$_file" = "X" ]; then
_file=$0
fi
provide_list=`rcorder -p $_file`
SYSCTL="/sbin/sysctl"
SYSCTL_N="${SYSCTL} -n"
CMD_OSTYPE="${SYSCTL_N} kern.ostype"
OSTYPE=`${CMD_OSTYPE}`
RC_RUNNING=0
RC_FAILED=1
RC_DISABLED=2
RC_IRRELEVANT=3
RC_CONFIGURED=4
RC_STOPPED=5
SYSCTL_W="${SYSCTL}"
#
# functions
# ---------
#
# set_rcvar base_var
# Set the variable name enabling a specific service.
# FreeBSD uses ${service}_enable, while NetBSD uses
# just the name of the service. For example:
# FreeBSD: sendmail_enable="YES"
# NetBSD : sendmail="YES"
# $1 - if $name is not the base to work of off, specify
# a different one
#
set_rcvar()
{
if [ -z "$1" ]; then
base_var=${name}
else
base_var="$1"
fi
echo ${base_var}
}
# set_provide_list
#
# $1 should be $rc_arg (start, stop, restart, reload, etc)
# $2 return value $RC_*
#
# Set the rcng_* variables associated with elements in provide_list
# based on $1 and $2.
#
# Returns non-zero when early termination should occur, in which
# case the caller should return with a value of $? - 1
#
set_provide_list()
{
# Remember, plret is set to the early termination return code + 1,
# or 0 if we want to continue the operation.
#
for i in $provide_list; do
case $1$2 in
start$RC_RUNNING|restart$RC_RUNNING)
varsym -s rcng_$i=running
;;
start$RC_FAILED|restart$RC_FAILED)
varsym -s rcng_$i=failed
;;
start$RC_DISABLED|restart$RC_DISABLED|reload$RC_DISABLED)
varsym -s rcng_$i=disabled
;;
start$RC_IRRELEVANT|restart$RC_IRRELEVANT|reload$RC_IRRELEVANT)
varsym -s rcng_$i=irrelevant
;;
start$RC_CONFIGURED|restart$RC_CONFIGURED)
varsym -s rcng_$i=configured
;;
stop$RC_DISABLED)
varsym -s rcng_$i=disabled
;;
stop$RC_IRRELEVANT)
varsym -s rcng_$i=irrelevant
;;
stop*)
varsym -s rcng_$i=stopped
;;
*)
;;
esac
done
}
# check_early_term
# $1 should be $rc_arg (start, stop, restart, reload, etc)
# $2 return value $RC_*
# $3 $rc_force "" not to force, "anything" to force.
#
# The return code is 0 if early termination is not to occur, non-zero if
# it is to occur. When early termination is to occur the caller should
# return check_early_term()'s return code - 1. That is, early termination
# can occur with or without an error.
#
# The provide list will be adjusted when early termination occurs.
#
check_early_term()
{
case $2 in
$RC_RUNNING)
return 0
;;
$RC_FAILED)
set_provide_list $1 $2
[ -z "$3" ] || return 0
return 2
;;
$RC_DISABLED)
set_provide_list $1 $2
[ -z "$3" ] || return 0
return 1
;;
$RC_IRRELEVANT)
set_provide_list $1 $2
[ -z "$3" ] || return 0
return 1
;;
$RC_CONFIGURED)
return 0
;;
$RC_STOPPED)
return 0
;;
esac
set_provide_list $1 $2
[ -z "$3" ] || return 0
return 2
}
# adjust_return_code $1
#
# Convert the return code to an exit code of 0 (success) or 1 (failure)
#
adjust_return_code()
{
if [ $1 = $RC_FAILED ]; then
return 1
fi
return 0
}
#
# force_depend script
# Force a service to start. Intended for use by services
# to resolve dependency issues. It is assumed the caller
# has check to make sure this call is necessary
# $1 - filename of script, in /etc/rc.d, to run
#
force_depend()
{
_depend="$1"
info "${name} depends on ${_depend}, which will be forced to start."
if ! /etc/rc.d/${_depend} forcestart ; then
warn "Unable to force ${_depend}. It may already be running."
return 1
fi
return 0
}
#
# checkyesno var
# Test $1 variable, and warn if not set to YES or NO.
# Return 0 if it's "yes" (et al), nonzero otherwise.
#
checkyesno()
{
# try foo
eval _value=\$${1%_enable}
# try foo_enable
if [ -z $_value ]
then
eval _value=\$${1%_enable}_enable;
fi
debug "checkyesno: $1 is set to $_value."
case $_value in
# "yes", "true", "on", or "1"
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
return 0
;;
# "no", "false", "off", or "0"
[Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
return 1
;;
*)
warn "\$${1} is not set properly - see rc.conf(5)."
return 1
;;
esac
}
# reverse_list list
# print the list in reverse order
#
reverse_list()
{
_revlist=
for _revfile in $*; do
_revlist="$_revfile $_revlist"
done
echo $_revlist
}
#
# mount_critical_filesystems type
# Go through the list of critical filesystems as provided in
# the rc.conf(5) variable $critical_filesystems_${type}, checking
# each one to see if it is mounted, and if it is not, mounting it.
#
mount_critical_filesystems()
{
eval _fslist=\$critical_filesystems_${1}
for _fs in $_fslist; do
mount | (
_ismounted=no
while read what _on on _type type; do
if [ $on = $_fs ]; then
_ismounted=yes
fi
done
if [ $_ismounted = no ]; then
mount $_fs >/dev/null 2>&1
fi
)
done
}
#
# check_pidfile pidfile procname [interpreter]
# Parses the first line of pidfile for a PID, and ensures
# that the process is running and matches procname.
# Prints the matching PID upon success, nothing otherwise.
# interpreter is optional; see _find_processes() for details.
#
check_pidfile()
{
_pidfile=$1
_procname=$2
_interpreter=$3
if [ -z "$_pidfile" -o -z "$_procname" ]; then
err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
fi
if [ ! -f $_pidfile ]; then
debug "pid file {$_pidfile): not readable."
return
fi
read _pid _junk < $_pidfile
if [ -z "$_pid" ]; then
debug "pid file {$_pidfile): no pid in file."
return
fi
_find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
}
#
# check_process procname [interpreter]
# Ensures that a process (or processes) named procname is running.
# Prints a list of matching PIDs.
# interpreter is optional; see _find_processes() for details.
#
check_process()
{
_procname=$1
_interpreter=$2
if [ -z "$_procname" ]; then
err 3 'USAGE: check_process procname [interpreter]'
fi
_find_processes $_procname ${_interpreter:-.} '-ax'
}
#
# _find_processes procname interpreter psargs
# Search for procname in the output of ps generated by psargs.
# Prints the PIDs of any matching processes, space separated.
#
# If interpreter == ".", check the following variations of procname
# against the first word of each command:
# procname
# `basename procname`
# `basename procname` + ":"
# "(" + `basename procname` + ")"
#
# If interpreter != ".", read the first line of procname, remove the
# leading #!, normalise whitespace, append procname, and attempt to
# match that against each command, either as is, or with extra words
# at the end.
#
_find_processes()
{
if [ $# -ne 3 ]; then
err 3 'USAGE: _find_processes procname interpreter psargs'
fi
_procname=$1
_interpreter=$2
_psargs=$3
_pref=
if [ $_interpreter != "." ]; then # an interpreted script
read _interp < $_procname # read interpreter name
_interp=${_interp#\#!} # strip #!
set -- $_interp
if [ $_interpreter != $1 ]; then
warn "\$command_interpreter $_interpreter != $1"
fi
_interp="$* $_procname" # cleanup spaces, add _procname
_interpbn="$1" # the interpreter binary
_fp_args='_argv'
_fp_match='case "$_argv" in
"${_interpbn##*/}: "$_procname*|${_interp}|"${_interp} "*)'
else # a normal daemon
_procnamebn=${_procname##*/}
_fp_args='_arg0 _argv'
_fp_match='case "$_arg0" in
$_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")'
fi
_proccheck='
ps -o "pid,command" '"$_psargs"' |
while read _npid '"$_fp_args"'; do
case "$_npid" in
PID)
continue ;;
esac ; '"$_fp_match"'
echo -n "$_pref$_npid" ;
_pref=" "
;;
esac
done'
# debug "in _find_processes: proccheck is ($_proccheck)."
eval $_proccheck
}
#
# wait_for_pids pid [pid ...]
# spins until none of the pids exist
#
wait_for_pids()
{
_list=$*
if [ -z "$_list" ]; then
return
fi
_prefix=
while true; do
_nlist="";
for _j in $_list; do
if kill -0 $_j 2>/dev/null; then
_nlist="${_nlist}${_nlist:+ }$_j"
fi
done
if [ -z "$_nlist" ]; then
break
fi
_list=$_nlist
echo -n ${_prefix:-"Waiting for PIDS: "}$_list
_prefix=", "
sleep 2
done
if [ -n "$_prefix" ]; then
echo "."
fi
}
#
# run_rc_command argument
# Search for argument in the list of supported commands, which is:
# "start stop restart rcvar status poll ${extra_commands}"
# If there's a match, run ${argument}_cmd or the default method
# (see below).
#
# If argument has a given prefix, then change the operation as follows:
# Prefix Operation
# ------ ---------
# fast Skip the pid check, and set rc_fast=yes
# force Set ${rcvar} to YES, and set rc_force=yes
# one Set ${rcvar} to YES
#
# The following globals are used:
#
# Name Needed Purpose
# ---- ------ -------
# provide_list (gen) list of keywords provided by current rcng file
#
# name y Name of script.
#
# command n Full path to command.
# Not needed if ${rc_arg}_cmd is set for
# each keyword.
#
# command_args n Optional args/shell directives for command.
#
# command_interpreter n If not empty, command is interpreted, so
# call check_{pidfile,process}() appropriately.
#
# extra_commands n List of extra commands supported.
#
# pidfile n If set, use check_pidfile $pidfile $command,
# otherwise use check_process $command.
# In either case, only check if $command is set.
#
# procname n Process name to check for instead of $command.
#
# rcvar n This is checked with checkyesno to determine
# if the action should be run.
#
# ${name}_chroot n Directory to chroot to before running ${command}
# Requires /usr to be mounted.
#
# ${name}_chdir n Directory to cd to before running ${command}
# (if not using ${name}_chroot).
#
# ${name}_flags n Arguments to call ${command} with.
# NOTE: $flags from the parent environment
# can be used to override this.
#
# ${name}_nice n Nice level to run ${command} at.
#
# ${name}_user n User to run ${command} as, using su(1) if not
# using ${name}_chroot.
# Requires /usr to be mounted.
#
# ${name}_group n Group to run chrooted ${command} as.
# Requires /usr to be mounted.
#
# ${name}_groups n Comma separated list of supplementary groups
# to run the chrooted ${command} with.
# Requires /usr to be mounted.
#
# ${rc_arg}_cmd n If set, use this as the method when invoked;
# Otherwise, use default command (see below)
#
# ${rc_arg}_precmd n If set, run just before performing the
# ${rc_arg}_cmd method in the default
# operation (i.e, after checking for required
# bits and process (non)existence).
# If this completes with a non-zero exit code,
# don't run ${rc_arg}_cmd.
#
# ${rc_arg}_postcmd n If set, run just after performing the
# ${rc_arg}_cmd method, if that method
# returned a zero exit code.
#
# required_dirs n If set, check for the existence of the given
# directories before running the default
# (re)start command.
#
# required_files n If set, check for the readability of the given
# files before running the default (re)start
# command.
#
# required_vars n If set, perform checkyesno on each of the
# listed variables before running the default
# (re)start command.
#
# Default behaviour for a given argument, if no override method is
# provided:
#
# Argument Default behaviour
# -------- -----------------
# start if !running && checkyesno ${rcvar}
# ${command}
#
# stop if ${pidfile}
# rc_pid=$(check_pidfile $pidfile $command)
# else
# rc_pid=$(check_process $command)
# kill $sig_stop $rc_pid
# wait_for_pids $rc_pid
# ($sig_stop defaults to TERM.)
#
# reload Similar to stop, except use $sig_reload instead,
# and doesn't wait_for_pids.
# $sig_reload defaults to HUP.
#
# restart Run `stop' then `start'.
#
# status Show if ${command} is running, etc.
#
# poll Wait for ${command} to exit.
#
# rcvar Display what rc.conf variable is used (if any).
#
# Variables available to methods, and after run_rc_command() has
# completed:
#
# Variable Purpose
# -------- -------
# rc_arg Argument to command, after fast/force/one processing
# performed
#
# rc_flags Flags to start the default command with.
# Defaults to ${name}_flags, unless overridden
# by $flags from the environment.
# This variable may be changed by the precmd method.
#
# rc_pid PID of command (if appropriate)
#
# rc_fast Not empty if "fast" was provided (q.v.)
#
# rc_force Not empty if "force" was provided (q.v.)
#
#
dummy_rc_command()
{
rc_arg=$1
case "$rc_arg" in
fast*) # "fast" prefix; don't check pid
rc_arg=${rc_arg#fast}
;;
force*) # "force" prefix; always start
rc_arg=${rc_arg#force}
;;
one*) # "one" prefix; set ${rcvar}=yes
rc_arg=${rc_arg#one}
;;
esac
set_provide_list $rc_arg $RC_CONFIGURED
return 0
}
run_rc_command()
{
_return=0
rc_arg=$1
if [ -z "$name" ]; then
err 3 'run_rc_command: $name is not set.'
fi
case "$rc_arg" in
fast*) # "fast" prefix; don't check pid
rc_arg=${rc_arg#fast}
rc_fast=yes
;;
force*) # "force" prefix; always start
rc_arg=${rc_arg#force}
rc_force=yes
if [ -n "${rcvar}" ]; then
eval ${rcvar}=YES
fi
;;
one*) # "one" prefix; set ${rcvar}=yes
rc_arg=${rc_arg#one}
if [ -n "${rcvar}" ]; then
eval ${rcvar}=YES
fi
esac
eval _override_command=\$${name}_program
if [ -n "$_override_command" ]; then
command=$_override_command
fi
_keywords="start stop restart rcvar $extra_commands"
rc_pid=
_pidcmd=
_procname=${procname:-${command}}
# setup pid check command if not fast
if [ -z "$rc_fast" -a -n "$_procname" ]; then
if [ -n "$pidfile" ]; then
_pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
else
_pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
fi
if [ -n "$_pidcmd" ]; then
_keywords="${_keywords} status poll"
fi
fi
if [ -z "$rc_arg" ]; then
rc_usage "$_keywords"
fi
if [ -n "$flags" ]; then # allow override from environment
rc_flags=$flags
else
eval rc_flags=\$${name}_flags
fi
eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \
_nice=\$${name}_nice _user=\$${name}_user \
_group=\$${name}_group _groups=\$${name}_groups
if [ -n "$_user" ]; then # unset $_user if running as that user
if [ "$_user" = "$(id -un)" ]; then
unset _user
fi
fi
# if ${rcvar} is set, and $1 is not
# "rcvar", then run
# checkyesno ${rcvar}
# and return if that failed
#
if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then
if ! checkyesno ${rcvar}; then
set_provide_list $rc_arg $RC_DISABLED
return 0
fi
fi
eval $_pidcmd # determine the pid if necessary
for _elem in $_keywords; do
if [ "$_elem" != "$rc_arg" ]; then
continue
fi
# if there's a custom ${XXX_cmd},
# run that instead of the default
#
eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \
_postcmd=\$${rc_arg}_postcmd
if [ -n "$_cmd" ]; then
# if the precmd failed and force
# isn't set, exit
#
if [ -n "$_precmd" ]; then
debug "run_rc_command: evaluating ${_precmd}()."
eval $_precmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
if [ -n "$_cmd" ]; then
debug "run_rc_command: evaluating ${_cmd}()."
eval $_cmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
if [ -n "$_postcmd" ]; then
debug "run_rc_command: evaluating ${_postcmd}()."
eval $_postcmd
_return=$?
check_early_term $rc_arg $_return "" || return $(($?-1))
fi
set_provide_list $rc_arg $_return
adjust_return_code $_return
return $?
fi
case "$rc_arg" in # default operations...
status)
if [ -n "$rc_pid" ]; then
echo "${name} is running as pid $rc_pid."
else
echo "${name} is not running."
return 1
fi
;;
start)
if [ -n "$rc_pid" ]; then
echo "${name} already running? (pid=$rc_pid)."
exit 1
fi
if [ ! -x $command ]; then
info "run_rc_command: cannot run ($command)."
set_provide_list $rc_arg $RC_FAILED
adjust_return_code $RC_FAILED
return $?
fi
# check for required variables,
# directories, and files
#
for _f in $required_vars; do
if ! checkyesno $_f; then
warn "\$${_f} is not set."
if [ -z "$rc_force" ]; then
set_provide_list $rc_arg $RC_FAILED
adjust_return_code $RC_FAILED
return $?
fi
fi
done
for _f in $required_dirs; do
if [ ! -d "${_f}/." ]; then
warn "${_f} is not a directory."
if [ -z "$rc_force" ]; then
set_provide_list $rc_arg $RC_FAILED
adjust_return_code $RC_FAILED
return $?
fi
fi
done
for _f in $required_files; do
if [ ! -r "${_f}" ]; then
warn "${_f} is not readable."
if [ -z "$rc_force" ]; then
set_provide_list $rc_arg $RC_FAILED
adjust_return_code $RC_FAILED
return $?
fi
fi
done
# if the precmd failed and force
# isn't set, exit
#
if [ -n "${_precmd}" ]; then
debug "run_rc_command: evaluating ${_precmd}()."
eval $_precmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
# setup the command to run, and run it
#
echo "Starting ${name}."
if [ -n "$_chroot" ]; then
_doit="\
${_nice:+nice -n $_nice }\
chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
$_chroot $command $rc_flags $command_args"
else
_doit="\
${_chdir:+cd $_chdir; }\
${_nice:+nice -n $_nice }\
$command $rc_flags $command_args"
if [ -n "$_user" ]; then
_doit="su -m $_user -c 'sh -c \"$_doit\"'"
fi
fi
# if the cmd failed and force
# isn't set, exit
#
debug "run_rc_command: _doit: $_doit"
eval $_doit
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
# finally, run postcmd
#
if [ -n "${_postcmd}" ]; then
debug "run_rc_command: evaluating ${_postcmd}()."
eval $_postcmd
fi
;;
stop)
if [ -z "$rc_pid" ]; then
if [ -n "$pidfile" ]; then
echo \
"${name} not running? (check $pidfile)."
else
echo "${name} not running?"
fi
set_provide_list $rc_arg $RC_STOPPED
exit 1
fi
# if the precmd failed and force
# isn't set, exit
#
if [ -n "$_precmd" ]; then
eval $_precmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
# send the signal to stop
#
echo "Stopping ${name}."
_doit="kill -${sig_stop:-TERM} $rc_pid"
if [ -n "$_user" ]; then
_doit="su -m $_user -c 'sh -c \"$_doit\"'"
fi
# if the stop cmd failed and force
# isn't set, exit
#
eval $_doit
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
# wait for the command to exit,
# and run postcmd.
sleep 0.1
wait_for_pids $rc_pid
if [ -n "$_postcmd" ]; then
eval $_postcmd
_return=$?
fi
;;
reload)
if [ -z "$rc_pid" ]; then
if [ -n "$pidfile" ]; then
echo \
"${name} not running? (check $pidfile)."
else
echo "${name} not running?"
fi
set_provide_list $rc_arg $RC_FAILED
exit 1
fi
echo "Reloading ${name} config files."
if [ -n "$_precmd" ]; then
eval $_precmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
_doit="kill -${sig_reload:-HUP} $rc_pid"
if [ -n "$_user" ]; then
_doit="su -m $_user -c 'sh -c \"$_doit\"'"
fi
eval $_doit
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
if [ -n "$_postcmd" ]; then
eval $_postcmd
_return=$?
fi
;;
restart)
if [ -n "$_precmd" ]; then
eval $_precmd
_return=$?
check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
fi
# prevent restart being called more
# than once by any given script
#
if [ -n "$_rc_restart_done" ]; then
return 0
fi
_rc_restart_done=YES
( $0 ${rc_force:+force}stop )
$0 ${rc_force:+force}start
_return=$?
if [ -n "$_postcmd" ]; then
eval $_postcmd
adjust_return_code $?
_return=$?
fi
# Do not set_provide_list(), the start command above
# will have done it for us and we do not know the
# actual RC code to base a setting on here.
#
return $_return
;;
poll)
if [ -n "$rc_pid" ]; then
wait_for_pids $rc_pid
fi
;;
rcvar)
echo "# $name"
if [ -n "$rcvar" ]; then
if checkyesno ${rcvar}; then
echo "\$${rcvar}=YES"
else
echo "\$${rcvar}=NO"
fi
fi
;;
*)
rc_usage "$_keywords"
;;
esac
set_provide_list $rc_arg $_return
adjust_return_code $_return
return $?
done
echo 1>&2 "$0: unknown directive '$rc_arg'."
rc_usage "$_keywords"
exit 1
}
#
# run_rc_script file arg
# Start the script `file' with `arg', and correctly handle the
# return value from the script. If `file' ends with `.sh', it's
# sourced into the current environment. If `file' appears to be
# a backup or scratch file, ignore it. Otherwise if it's
# executable run as a child process.
#
run_rc_script()
{
_file=$1
_arg=$2
if [ -z "$_file" -o -z "$_arg" ]; then
err 3 'USAGE: run_rc_script file arg'
fi
trap "echo 'Reboot interrupted'; exit 1" 3
unset name command command_args command_interpreter \
extra_commands pidfile procname \
rcvar required_dirs required_files required_vars
eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd
case "$_file" in
*.sh) # run in current shell
set $_arg ; . $_file
;;
*[~#]|*.OLD|*.orig) # scratch file; skip
warn "Ignoring scratch file $_file"
;;
*) # run in subshell
if [ -x $_file ]; then
if [ -n "$rc_fast_and_loose" ]; then
set $_arg ; . $_file
else
( trap "echo 'Reboot interrupted'; exit 1" 3
set $_arg ; . $_file )
fi
fi
;;
esac
}
# ltr str src dst
# Change every $src in $str to $dst.
# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor
# awk(1).
ltr()
{
local _str _src _dst _out _com
_str=$1
_src=$2
_dst=$3
_out=""
IFS=${_src}
for _com in ${_str}; do
if [ -z "${_out}" ]; then
_out="${_com}"
else
_out="${_out}${_dst}${_com}"
fi
done
echo "${_out}"
}
#
# load_rc_config
# Source in the configuration file for a given command.
#
load_rc_config()
{
_command=$1
if [ -z "$_command" ]; then
err 3 'USAGE: load_rc_config command'
fi
if [ -z "$_rc_conf_loaded" ]; then
if [ -r /etc/defaults/rc.conf ]; then
debug "Sourcing /etc/defaults/rc.conf"
. /etc/defaults/rc.conf
source_rc_confs
elif [ -r /etc/rc.conf ]; then
debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)."
. /etc/rc.conf
fi
_rc_conf_loaded=YES
fi
if [ -f /etc/rc.conf.d/"$_command" ]; then
debug "Sourcing /etc/rc.conf.d/${_command}"
. /etc/rc.conf.d/"$_command"
fi
# XXX - Deprecated variable name support
#
[ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable"
[ -n "$portmap_program" ] && rpcbind_program="$portmap_program"
[ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags"
[ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable"
[ -n "$dhcp_program" ] && dhclient_program="$dhcp_program"
[ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags"
}
#
# rc_usage commands
# Print a usage string for $0, with `commands' being a list of
# valid commands.
#
rc_usage()
{
echo -n 1>&2 "Usage: $0 [fast|force|one]("
_sep=
for _elem in $*; do
echo -n 1>&2 "$_sep$_elem"
_sep="|"
done
echo 1>&2 ")"
exit 1
}
#
# err exitval message
# Display message to stderr and log to the syslog, and exit with exitval.
#
err()
{
exitval=$1
shift
if [ -x /usr/bin/logger ]; then
logger "$0: ERROR: $*"
fi
echo 1>&2 "$0: ERROR: $*"
exit $exitval
}
#
# warn message
# Display message to stderr and log to the syslog.
#
warn()
{
if [ -x /usr/bin/logger ]; then
logger "$0: WARNING: $*"
fi
echo 1>&2 "$0: WARNING: $*"
}
#
# info message
# Display informational message to stdout and log to syslog.
#
info()
{
case ${rc_info} in
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
if [ -x /usr/bin/logger ]; then
logger "$0: INFO: $*"
fi
echo "$0: INFO: $*"
;;
esac
}
#
# debug message
# If debugging is enabled in rc.conf output message to stderr.
# BEWARE that you don't call any subroutine that itself calls this
# function.
#
debug()
{
case ${rc_debug} in
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
if [ -x /usr/bin/logger ]; then
logger "$0: INFO: $*"
fi
echo 1>&2 "$0: DEBUG: $*"
;;
esac
}
#
# backup_file action file cur backup
# Make a backup copy of `file' into `cur', and save the previous
# version of `cur' as `backup' or use rcs for archiving.
#
# This routine checks the value of the backup_uses_rcs variable,
# which can be either YES or NO.
#
# The `action' keyword can be one of the following:
#
# add `file' is now being backed up (and is possibly
# being reentered into the backups system). `cur'
# is created and RCS files, if necessary, are
# created as well.
#
# update `file' has changed and needs to be backed up.
# If `cur' exists, it is copied to to `back' or
# checked into RCS (if the repository file is old),
# and then `file' is copied to `cur'. Another RCS
# check in done here if RCS is being used.
#
# remove `file' is no longer being tracked by the backups
# system. If RCS is not being used, `cur' is moved
# to `back', otherwise an empty file is checked in,
# and then `cur' is removed.
#
#
backup_file()
{
_action=$1
_cpfile=$2
_cur=$3
_back=$4
if checkyesno backup_uses_rcs; then
_msg0="backup archive"
_msg1="update"
# ensure that history file is not locked
if [ -f $_cur,v ]; then
rcs -q -u -U -M $_cur
fi
# ensure after switching to rcs that the
# current backup is not lost
if [ -f $_cur ]; then
# no archive, or current newer than archive
if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then
ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
rcs -q -kb -U $_cur
co -q -f -u $_cur
fi
fi
case $_action in
add|update)
cp -p $_cpfile $_cur
ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
rcs -q -kb -U $_cur
co -q -f -u $_cur
chown root:wheel $_cur $_cur,v
;;
remove)
cp /dev/null $_cur
ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
rcs -q -kb -U $_cur
chown root:wheel $_cur $_cur,v
rm $_cur
;;
esac
else
case $_action in
add|update)
if [ -f $_cur ]; then
cp -p $_cur $_back
fi
cp -p $_cpfile $_cur
chown root:wheel $_cur
;;
remove)
mv -f $_cur $_back
;;
esac
fi
}
# devfs_mount_jail dir
# Mounts a devfs file system appropriate for jails
# on the directory dir.
# This function returns non-zero if an error occurs.
#
devfs_mount_jail()
{
local jdev _me
jdev="$1"
_me="devfs_mount_jail"
if ! devfs_domount "$jdev" $rs; then
warn "$_me: devfs was not mounted on $jdev"
return 1
fi
return 0
}
# devfs_domount dir
# Mount devfs on dir.
# Returns 0 on success.
#
devfs_domount()
{
local devdir _me
devdir="$1"
_me="devfs_domount()"
if [ -z "$devdir" ]; then
warn "$_me: you must specify a mount-point"
return 1
fi
debug "$_me: mount-point is ($devdir)"
if ! mount -t devfs devfs "$devdir"; then
warn "$_me: Unable to mount devfs on $devdir"
return 1
fi
return 0
}
Jump to Line
Something went wrong with that request. Please try again.