Skip to content


Subversion checkout URL

You can clone with
Download ZIP
Commits on Apr 20, 2011
  1. release - Branch 2.10

    Matthew Dillon committed
    * Edit sys/sys/param.h, sys/conf/
  2. kernel - Add kqueue support to ulpt for CUPS printing

    Matthew Dillon committed
    * Adjust the ulpt driver to add kqueue support (reporting always write-ready).
      Otherwise CUPS will stall indefinitely on a usb printer device.
    * NOTE: For CUPS operation /dev/ulpt* must be chgrp'd lp and modes 664,
    	by adding this to your /etc/devfs.conf:
    	perm ulpt* root:lp 664
    	(group 'lp' is added by the CUPS package).
Commits on Apr 19, 2011
  1. newfs_hammer: update checks on undosize and fssize minimum

    Thomas Nikolajsen committed
    Unless -f options given undosize must be at least 500MB
    and fssize at least 10GB (50GB recommended).
    Also fix a few extra spaces.
  2. hammer.8: improve general description and markup

    Thomas Nikolajsen committed
  3. nrelease - index.html: fix stale links

    Thomas Nikolajsen committed
  4. nrelease - update README w/ HAMMER instructions etc

    Thomas Nikolajsen committed
     - Add instructions on manual HAMMER install
     - Default USB disk name is 'da8'
     - SILI disks uses 'da' name, default 'da0'
     - EHCI (USB 2.0) is enabled by default
  5. @tuxillo

    hammer - Fix version output

    tuxillo committed
    Do not try to display WIP version if there isn't one.
  6. @vsrinivas

    bitstring.h -- Correct bit_fls and bit_nsearch

    vsrinivas committed
    bit_nsearch was searching for one-too-many bits and was walking the whole set.
    Submitted-by: Luis Useche <>
  7. acpi: Reduce log verbosity

    Sepherosa Ziehau committed
  8. test from machine bugg

    Sepherosa Ziehau committed
Commits on Apr 17, 2011
  1. Add a final newline to the last file that didn't have one.

    Sascha Wildner committed
  2. kbdcontrol(1): Raise WARNS to 6 and fix warnings.

    Sascha Wildner committed
  3. vknetd(8): Raise WARNS to 6 and fix warnings.

    Sascha Wildner committed
  4. installer/LiveCD: Do no longer set kern.emergency_intr_enable to 1.

    Sascha Wildner committed
    In-discussion-with: sephe
  5. acpi/pcib: If bus does not present, give other bus drivers chance

    Sepherosa Ziehau committed
    - Call acpi_DeviceIsPresent() during probing, so that if bus does not
      present other bus drivers could have chance to take over the bus.
    - In acpi_pcib_attach(), assert that bus is present, since the presence
      of the bus is checked during probing.
    Reported-by: swildner@
  6. ioapic/abi; Reduce log verbosity

    Sepherosa Ziehau committed
  7. acpi: FACS is already loaded, don't load it manually again

    Sepherosa Ziehau committed
  8. acpi: Enable ACPI reset by default

    Sepherosa Ziehau committed
    - Enable ACPI reset if FADT has this feature bit set
    - During ACPI reset, use AcpiReset() instead of rolling our own
    Obtained-from: FreeBSD (r213755
  9. acpi/pstate: Add tunable to allow BIOS whacking start/max FID/VID

    Sepherosa Ziehau committed
    This tunable is set to 1 (stringent check) by default.
  10. powerd: Wait hw.acpi.cpu.px_dom* sysctl to be created by kernel

    Sepherosa Ziehau committed
    Since hw.acpi.cpu.px_dom* creation is queued into ACPI taskqueue
    and ACPI taskqueue is shared across various ACPI modules, any delay
    in other modules may cause hw.acpi.cpu.px_dom* to be created at
    quite a later time (e.g. cmbat module's task could take quite a lot
    of time).
  11. acpi: Enable GPE for button and lid, if they have _PRW object

    Sepherosa Ziehau committed
    For devices which has _PRW object, AcpiSetupGpeForWake() will be called,
    however, AcpiSetupGpeForWake() will disable GPE, which causes devices
    like button and lid to stop function if they have _PRW object.  So for
    button and lid, we explicitly enable GPE if they have _PRW object.
    Reported-by: y0netan1@
  12. acpi: Skip \_SB_ and \_TZ_ only for devices.

    Sepherosa Ziehau committed
    Obtained-from: FreeBSD (r214765
      Adjust a comment to clarify why \_SB_ and \_TZ_ are defined as device
      type in ACPICA.  Reshuffle the code a bit to make sure this kludge only
      applies to these two specical cases and to make it cleaner.
  13. acpi: Restore old AcpiWalkNamespace semantic

    Sepherosa Ziehau committed
    Noticed-by: y0netan1@
Commits on Apr 16, 2011
  1. sh: Add test for obscure and ambiguous ${#?}.

    Peter Avalos committed
    Obtained-from: FreeBSD
  2. sh: Add some tests for ${#parameter}.

    Peter Avalos committed
    Obtained-from: FreeBSD
  3. sh: Add some tests for omitting whitespace.

    Peter Avalos committed
    Obtained-from: FreeBSD
  4. sh: Split off some special behavior into separate regress tests.

    Peter Avalos committed
    Obtained-from: FreeBSD
  5. sh(1): Describe subshell environment, command substitution better

    Peter Avalos committed
    POSIX does not require the shell to fork for a subshell environment, and
    we use that possibility in various ways (command substitutions with a
    single command and most subshells that are the final command of a shell
    process).  Therefore do not tie subshells to forking in the man page.
    Also, fix some sentences with excessive semicolons.
    Obtained-from:  FreeBSD
  6. sh: Fix some parameter expansion variants ${#...}.

    Peter Avalos committed
    These already worked: $# ${#} ${##} ${#-} ${#?}
    These now work as well: ${#+word} ${#-word} ${##word} ${#%word}
    There is an ambiguity in the standard with ${#?}: it could be the length of
    $? or it could be $# giving an error in the (impossible) case that it is not
    set. We continue to use the former interpretation as it seems more useful.
    Obtained-from:  FreeBSD
  7. sh: Reduce diffs to FreeBSD in the arith code.

    Peter Avalos committed
    Obtained-from:   FreeBSD
  8. ctags(1): Raise WARNS to 6 and fix warnings.

    Sascha Wildner committed
Something went wrong with that request. Please try again.