Skip to content
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.gitignore
LICENSE
README.md
cyborg_ring_software.ino
cyborg_ring_software.ino.hex

README.md

F0cks_CyborgRing_Software

I have created my own hardware and software of Zach Fredin zakqwy Cyborg ring. This code can only be used with my Cyborg ring hardware.
You can find more information on my blog : blog.f0cks.net/projects/Cyborg-ring.

Prerequisites

  • You will need avrdude to flash the ring.
  • A programmer like the USBasp (with some modifications to adapt the connector).
  • Arduino IDE if you want to modify and rebuild the code.

Programming

You need to change fuses to switch internal oscillator from 8MHz to 6.4MHz :

avrdude -c usbasp  -p t85 -U lfuse:w:0x43:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m -B 400

You can use the provided .hex file or create your own by rebuilding cyborg_ring_software.ino with Arduino IDE.

avrdude -c usbasp  -p t85 -U flash:w:cyborg_ring_software.ino.hex -B 400

Authors

  • Geoffrey Enjolras - F0cks

License

In agreement with Zach Fredin, this code is released under the terms of the Creative Commons Attribution-ShareAlike 4.0 license, available here: http://creativecommons.org/licenses/by-sa/4.0/. Creative Commons License

Acknowledgments

Completely inspired by Zach Fredin zakqwy.

You can’t perform that action at this time.