Skip to content

Modules Module 2

FLMRobert edited this page Jan 28, 2018 · 11 revisions

Module 2 Overview

Module 2 Schematic Module 2 PCB Module 2 Assembled

Module 2: schematic, circuit board and assembled module

The idea for Module 2 was to use it for standard LED lamp projects. The module can be used for creating a LED lamp that replaces two 60 W light bulb (i.e. a "standard ceiling light") or to replace four 60 W light bulbs (i.e. the "standard living room ceiling light").

Module 2 is designed to work with a constant current source of 350 mA or 700 mA.

Using a 350 mA current source corresponds ot the "two 60 W light bulb" mode: With a 350 mA current source, you need to chain Module 2 five times in order to get the correct electrical current per LED.

Using a 700 mA current source corresponds ot the "four 60 W light bulbs" mode: With a 700 mA current source, you need to chain Module 2 sevent times in order to get the correct electrical current per LED.

You should stick to these recommendations in order to not destroy the LEDs.

LED

Module Applications

Data Sheet

Module 2 Data Sheet

You can’t perform that action at this time.