Switch branches/tags
Nothing to show
Find file
Fetching contributors…
Cannot retrieve contributors at this time
4844 lines (3722 sloc) 202 KB


Synopsis 2: Bits and Pieces


Larry Wall <>


Created: 10 Aug 2004

Last Modified: 28 Jul 2012
Version: 268

This document summarizes Apocalypse 2, which covers small-scale lexical items and typological issues. (These Synopses also contain updates to reflect the evolving design of Perl 6 over time, unlike the Apocalypses, which are frozen in time as "historical documents". These updates are not marked--if a Synopsis disagrees with its Apocalypse, assume the Synopsis is correct.)

One-pass parsing

To the extent allowed by sublanguages' parsers, Perl is parsed using a one-pass, predictive parser. That is, lookahead of more than one "longest token" is discouraged. The currently known exceptions to this are where the parser must:

  • Locate the end of interpolated expressions that begin with a sigil and might or might not end with brackets.

  • Recognize that a reduce operator is not really beginning a [...] composer.

One-pass parsing is fundamental to knowing exactly which language you are dealing with at any moment, which in turn is fundamental to allowing unambiguous language mutation in any desired direction. (Generic languages are allowed, but only if intended; accidentally generic languages lead to loss of linguistic identity and integrity. This is the hard lesson of Perl 5's source filters and other multi-pass parsing mistakes.)

Lexical Conventions

Unicode Semantics

In the abstract, Perl is written in Unicode, and has consistent Unicode semantics regardless of the underlying text representations. By default Perl presents Unicode in "NFG" formation, where each grapheme counts as one character. A grapheme is what the novice user would think of as a character in their normal everyday life, including any diacritics.

Perl can count Unicode line and paragraph separators as line markers, but that behavior had better be configurable so that Perl's idea of line numbers matches what your editor thinks about Unicode lines.

Unicode horizontal whitespace is counted as whitespace, but it's better not to use thin spaces where they will make adjoining tokens look like a single token. On the other hand, Perl doesn't use indentation as syntax, so you are free to use any amount of whitespace anywhere that whitespace makes sense. Comments always count as whitespace.

Bracketing Characters

For some syntactic purposes, Perl distinguishes bracketing characters from non-bracketing. Bracketing characters are defined as any Unicode characters with either bidirectional mirrorings or Ps/Pe/Pi/Pf properties.

In practice, though, you're safest using matching characters with Ps/Pe/Pi/Pf properties, though ASCII angle brackets are a notable exception, since they're bidirectional but not in the Ps/Pe/Pi/Pf sets.

Characters with no corresponding closing character do not qualify as opening brackets. This includes the second section of the Unicode BidiMirroring data table.

If a character is already used in Ps/Pe/Pi/Pf mappings, then any entry in BidiMirroring is ignored (both forward and backward mappings). For any given Ps character, the next Pe codepoint (in numerical order) is assumed to be its matching character even if that is not what you might guess using left-right symmetry. Therefore U+298D maps to U+298E, not U+2990, and U+298F maps to U+2990, not U+298E. Neither U+298E nor U+2990 are valid bracket openers, despite having reverse mappings in the BidiMirroring table.

The U+301D codepoint has two closing alternatives, U+301E and U+301F; Perl 6 only recognizes the one with lower code point number, U+301E, as the closing brace. This policy also applies to new one-to-many mappings introduced in the future.

However, many-to-one mappings are fine; multiple opening characters may map to the same closing character. For instance, U+2018, U+201A, and U+201B may all be used as the opener for the U+2019 closer. Constructs that count openers and closers assume that only the given opener is special. That is, if you open with one of the alternatives, all other alternatives are treated as non-bracketing characters within that construct.

Multiline Comments

Pod sections may be used reliably as multiline comments in Perl 6. Unlike in Perl 5, Pod syntax now lets you use =begin comment and =end comment delimit a Pod block correctly without the need for =cut. (In fact, =cut is now gone.) The format name does not have to be comment -- any unrecognized format name will do to make it a comment. (However, bare =begin and =end probably aren't good enough, because all comments in them will show up in the formatted output.)

We have single paragraph comments with =for comment as well. That lets =for keep its meaning as the equivalent of a =begin and =end combined. As with =begin and =end, a comment started in code reverts to code afterwards.

Since there is a newline before the first =, the Pod form of comment counts as whitespace equivalent to a newline. See S26 for more on embedded documentation.

Single-line Comments

Except within a quote literal, a # character always introduces a comment in Perl 6. There are two forms of comment based on #. Embedded comments require the # to be followed by a backtick (`) plus one or more opening bracketing characters.

All other uses of # are interpreted as single-line comments that work just as in Perl 5, starting with a # character and ending at the subsequent newline. They count as whitespace equivalent to newline for purposes of separation. Unlike in Perl 5, # may not be used as the delimiter in quoting constructs.

Embedded Comments

Embedded comments are supported as a variant on quoting syntax, introduced by #` plus any user-selected bracket characters (as defined in "Bracketing Characters" above):

say #`( embedded comment ) "hello, world!";

$object\#`{ embedded comments }.say;

$object\ #`「
    embedded comments

Brackets may be nested, following the same policy as ordinary quote brackets.

There must be no space between the #` and the opening bracket character. (There may be the visual appearance of space for some double-wide characters, however, such as the corner quotes above.)

For multiline comments it is recommended (but not required) to use two or more brackets both for visual clarity and to avoid relying too much on internal bracket counting heuristics when commenting code that may accidentally miscount single brackets:

    say "here is an unmatched } character";

However, it's sometimes better to use Pod comments because they are implicitly line-oriented.

User-selected Brackets

For all quoting constructs that use user-selected brackets, you can open with multiple identical bracket characters, which must be closed by the same number of closing brackets. Counting of nested brackets applies only to pairs of brackets of the same length as the opening brackets:

say #`{{
    This comment contains unmatched } and { { { {   (ignored)
    Plus a nested {{ ... }} pair                    (counted)
}} q<< <<woot>> >>   # says " <<woot>> "

Note however that bare circumfix or postcircumfix <<...>> is not a user-selected bracket, but the ASCII variant of the «...» interpolating word list. Only #` and the q-style quoters (including m, s, tr, and rx) enable subsequent user-selected brackets.


Some languages such as C allow you to escape newline characters to combine lines. Other languages (such as regexes) allow you to backslash a space character for various reasons. Perl 6 generalizes this notion to any kind of whitespace. Any contiguous whitespace (including comments) may be hidden from the parser by prefixing it with \. This is known as the "unspace". An unspace can suppress any of several whitespace dependencies in Perl. For example, since Perl requires an absence of whitespace between a noun and a postfix operator, using unspace lets you line up postfix operators:

%hash\  {$key}
@array\ [$ix]

As a special case to support the use above, a backslash where a postfix is expected is considered a degenerate form of unspace. Note that whitespace is not allowed before that, hence

$subref \($arg)

is a syntax error (two terms in a row). And

foo \($arg)

will be parsed as a list operator with a Capture argument:


However, other forms of unspace may usefully be preceded by whitespace. (Unary uses of backslash may therefore never be followed by whitespace or they would be taken as an unspace.)

Other postfix operators may also make use of unspace:

$number\  ++;
$number\  --;
1+3\      i;
$object\  .say();
$object\#`{ your ad here }.say

Another normal use of a you-don't-see-this-space is typically to put a dotted postfix on the next line:

$object\ # comment

$object\#`[ comment


But unspace is mainly about language extensibility: it lets you continue the line in any situation where a newline might confuse the parser, regardless of your currently installed parser. (Unless, of course, you override the unspace rule itself...)

Although we say that the unspace hides the whitespace from the parser, it does not hide whitespace from the lexer. As a result, unspace is not allowed within a token. Additionally, line numbers are still counted if the unspace contains one or more newlines. Since Pod chunks count as whitespace to the language, they are also swallowed up by unspace. Heredoc boundaries are suppressed, however, so you can split excessively long heredoc intro lines like this:

ok(q:to'CODE', q:to'OUTPUT', \
"Here is a long description", \ # --more--
todo(:parrøt<0.42>, :dötnet<1.2>));

To the heredoc parser that just looks like:

ok(q:to'CODE', q:to'OUTPUT', "Here is a long description", todo(:parrøt<0.42>, :dötnet<1.2>));

Note that this is one of those cases in which it is fine to have whitespace before the unspace, since we're only trying to suppress the newline transition, not all whitespace as in the case of postfix parsing. (Note also that the example above is not meant to spec how the test suite works. )

Comments in Unspaces and vice versa

An unspace may contain a comment, but a comment may not contain an unspace. In particular, end-of-line comments do not treat backslash as significant. If you say:

#`\ (...


#\ `(...

it is an end-of-line comment, not an embedded comment. Write:

\ #`(

to mean the other thing.

Optional Whitespace and Exclusions

In general, whitespace is optional in Perl 6 except where it is needed to separate constructs that would be misconstrued as a single token or other syntactic unit. (In other words, Perl 6 follows the standard longest-token principle, or in the cases of large constructs, a prefer shifting to reducing principle. See "Grammatical Categories" below for more on how a Perl program is analyzed into tokens.)

This is an unchanging deep rule, but the surface ramifications of it change as various operators and macros are added to or removed from the language, which we expect to happen because Perl 6 is designed to be a mutable language. In particular, there is a natural conflict between postfix operators and infix operators, either of which may occur after a term. If a given token may be interpreted as either a postfix operator or an infix operator, the infix operator requires space before it. Postfix operators may never have intervening space, though they may have an intervening dot. If further separation is desired, an unspace or embedded comment may be used as described above, as long as no whitespace occurs outside the unspace or embedded comment.

For instance, if you were to add your own infix:<++> operator, then it must have space before it. The normal autoincrementing postfix:<++> operator may never have space before it, but may be written in any of these forms:




$x\ ++

$x\ .++

$x\#`( comment ).++
$x\#`((( comment ))).++


$x\         # comment
            # inside unspace

$x\         # comment
            # inside unspace
++          # (but without the optional postfix dot)

$x\#`『      comment
            more comment

$x\#`[   comment 1
comment 2
=begin Podstuff
whatever (Pod comments ignore current parser state)
=end Podstuff
comment 3

Implicit Topical Method Calls

A consequence of the postfix rule is that (except when delimiting a quote or terminating an unspace) a dot with whitespace in front of it is always considered a method call on $_ where a term is expected. If a term is not expected at this point, it is a syntax error. (Unless, of course, there is an infix operator of that name beginning with dot. You could, for instance, define a Fortranly infix:<.EQ.> if the fit took you. But you'll have to be sure to always put whitespace in front of it, or it would be interpreted as a postfix method call instead.)

For example,

foo .method



will always be interpreted as

foo $_.method

but never as


Use some variant of


if you mean the postfix method call.

One consequence of all this is that you may no longer write a Num as 42. with just a trailing dot. You must instead say either 42 or 42.0. In other words, a dot following a number can only be a decimal point if the following character is a digit. Otherwise the postfix dot will be taken to be the start of some kind of method call syntax. (The .123 form with a leading dot is still allowed however when a term is expected, and is equivalent to 0.123 rather than $_.123.)

Built-In Data Types

Perl 6 has an optional type system that helps you write safer code that performs better. The compiler is free to infer what type information it can from the types you supply, but it will not complain about missing type information unless you ask it to.

Perl 6 is an OO engine, but you're not generally required to think in OO when that's inconvenient. However, some built-in concepts such as filehandles are more object-oriented in a user-visible way than in Perl 5.

The P6opaque Datatype

In support of OO encapsulation, there is a new fundamental data representation: P6opaque. External access to opaque objects is always through method calls, even for attributes.

Name Equivalence of Types

Types are officially compared using name equivalence rather than structural equivalence. However, we're rather liberal in what we consider a name. For example, the name includes the version and authority associated with the module defining the type (even if the type itself is "anonymous"). Beyond that, when you instantiate a parametric type, the arguments are considered part of the "long name" of the resulting type, so one Array of Int is equivalent to another Array of Int. (Another way to look at it is that the type instantiation "factory" is memoized.) Typename aliases are considered equivalent to the original type. In particular, the Array of Int syntax is just sugar for Array:of(Int), which is the canonical form of an instantiated generic type.

This name equivalence of parametric types extends only to parameters that can be considered immutable (or that at least can have an immutable snapshot taken of them). Two distinct classes are never considered equivalent even if they have the same attributes because classes are not considered immutable.

Properties on Objects

Perl 6 supports the notion of properties on various kinds of objects. Properties are like object attributes, except that they're managed by the individual object rather than by the object's class.

According to S12, properties are actually implemented by a kind of mixin mechanism, and such mixins are accomplished by the generation of an individual anonymous class for the object (unless an identical anonymous class already exists and can safely be shared).


Properties applied to objects constructed at compile-time, such as variables and classes, are also called traits. Traits cannot be changed at run-time. Changes to run-time properties are done via mixin instead, so that the compiler can optimize based on declared traits.

Types as Constraints

A variable's type is a constraint indicating what sorts of values the variable may contain. More precisely, it's a promise that the object or objects contained in the variable are capable of responding to the methods of the indicated "role". See S12 for more about roles.

# $x can contain only Int objects
my Int $x;

Container Types

A variable may itself be bound to a container type that specifies how the container works, without specifying what kinds of things it contains.

# $x is implemented by the MyScalar class
my $x is MyScalar;

Constraints and container types can be used together:

# $x can contain only Int objects,
# and is implemented by the MyScalar class
my Int $x is MyScalar;

Note that $x is also initialized to the Int type object. See below for more on this.

Type Objects

my Dog $spot by itself does not automatically call a Dog constructor. It merely assigns an undefined Dog prototype object to $spot:

my Dog $spot;           # $spot is initialized with ::Dog
my Dog $spot = Dog;     # same thing

$spot.defined;          # False
say $spot;              # "Dog()"

Any type name used as a value is an undefined instance of that type's prototype object, or type object for short. See S12 for more on that.

Any type name in rvalue context is parsed as a single type value and expects no arguments following it. However, a type object responds to the function call interface, so you may use the name of a type with parentheses as if it were a function, and any argument supplied to the call is coerced to the type indicated by the type object. If there is no argument in the parentheses, the type object returns itself:

my $type = Num;             # type object as a value
$num = $type($string)       # coerce to Num

To get a real Dog object, call a constructor method such as new:

my Dog $spot .= new;
my Dog $spot = $;   # .= is rewritten into this

You can pass in arguments to the constructor as well:

my Dog $cerberus .= new(heads => 3);
my Dog $cerberus = $ => 3);   # same thing

Coercive type declarations

The parenthesized form of type coercion may be used in declarations where it makes sense to accept a wider set of types but coerce them to a narrow type. (This only works for one-way coercion, so you may not declare any rw parameter with a coercive type.) The type outside the parens indicates the desired end result, and subsequent code may depend on the it being that type. The type inside the parens indicates the acceptable set of types that are allowed to be bound or assigned to this location via coercion. If the wide type is omitted, Any is assumed. In any case, the wide type is only indicative of permission to coerce; there must still be an available coercion routine from the wide type to the narrow type to actually perform the coercion.

sub foo (Str(Any) $y) {...}
sub foo (Str()    $y) {...}    # same thing

my Num(Cool) $x = prompt "Gimme a number";

Coercions may also be specified on the return type:

sub bar ($x, $y --> Int()) { return 3.5 }  # returns 3

Containers of Native Types

If you say

my int @array is MyArray;

you are declaring that the elements of @array are native integers, but that the array itself is implemented by the MyArray class. Untyped arrays and hashes are still perfectly acceptable, but have the same performance issues they have in Perl 5.

Methods on Arrays

To get the number of elements in an array, use the .elems method. You can also ask for the total string length of an array's elements, in codepoints or graphemes, using these methods, .codes or .graphs respectively on the array. The same methods apply to strings as well. (Note that .codes is not well-defined unless you know which canonicalization is in effect. Hence, it allows an optional argument to specify the meaning exactly if it cannot be known from context.)

There is no .length method for either arrays or strings, because length does not specify a unit.

Built-in Type Conventions

Built-in object types start with an uppercase letter. This includes immutable types (e.g. Int, Num, Complex, Rat, Str, Bit, Regex, Set, Block, Iterator), as well as mutable (container) types, such as Scalar, Array, Hash, Buf, Routine, Module, and non-instantiable Roles such as Callable and Integral.

Non-object (native) types are lowercase: int, num, complex, rat, buf, bit. Native types are primarily intended for declaring compact array storage, that is, a sequence of storage locations of the specified type laid out in memory contiguously without pointer indirection. However, Perl will try to make those look like their corresponding uppercase types if you treat them that way. (In other words, it does autoboxing. Note, however, that sometimes repeated autoboxing can slow your program more than the native type can speed it up.)

The .WHICH Method for Value Types

Some object types can behave as value types. Every object can produce a "WHICH" value that uniquely identifies the object for hashing and other value-based comparisons. Normal objects just use their location as their identity, but if a class wishes to behave as a value type, it can define a .WHICH method that makes different objects look like the same object if they happen to have the same contents.

The ObjAt Type

When we say that a normal object uses its location as its identity, we do not mean that it returns its address as a number. In the first place, not all objects are in the same memory space (see the literature on NUMA, for instance), and two objects should not accidentally have the same identity merely because they were stored at the same offset in two different memory spaces. We also do not want to allow accidental identity collisions with values that really are numbers (or strings, or any other mundane value type). Nor should we be encouraging people to think of object locations that way in any case. So WHICH still returns a value rather than another object, but that value must be of a special ObjAt type that prevents accidental confusion with normal value types, and at least discourages trivial pointer arithmetic.

Certainly, it is difficult to give a unique name to every possible address space, let alone every possible address within every such a space. In the absence of a universal naming scheme, it can only be made improbable that two addresses from two different spaces will collide. A sufficiently large random number may represent the current address space on output of an ObjAt to a different address space, or if serialized to YAML or XML. (This extra identity component need not be output for debugging messages that assume the current address space, since it will be the same big number consistently, unless your process really is running under a NUMA.)

Alternately, if an object is being serialized to a form that does not preserve object identity, there is no requirement to preserve uniqueness, since the object is in this case is really being translated to a value type representation, and reconstituted on the other end as a different unique object.

Variables Containing Undefined Values

A variable with a non-native type constraint may contain an undefined value such as a type object, provided the undefined value meets the type constraint.

my Int $x = Int;  # works
my Buf $x = Buf8; # works

Variables with native types do not support undefinedness: it is an error to assign an undefined value to them:

my int $y = Int;    # dies

Since num can support the value NaN but not the general concept of undefinedness, you can coerce an undefined value like this:

my num $n = computation() // NaN;

Variables of non-native types start out containing a type object of the appropriate type unless explicitly initialized to a defined value.

Any container's default may be overridden by the is default(VALUE) trait. If the container's contents are deleted, the value is notionally set to provided default value; this value may or may not be physically represented in memory, depending on the implemention of the container. You should officially not care about that (much).

The HOW Method

Every object supports a HOW function/method that returns the metaclass instance managing it, regardless of whether the object is defined:

'x'.HOW.methods('x');   # get available methods for strings
Str.HOW.methods(Str);   # same thing with the prototype object Str
HOW(Str).methods(Str);  # same thing as function call

'x'.methods;        # this is likely an error - not a meta object
Str.methods;        # same thing

(For a prototype system (a non-class-based object system), all objects are merely managed by the same meta object.)


Perl supports generic types through what are called "roles" which represent capabilities or interfaces. These roles are generally not used directly as object types. For instance all the numeric types perform the Numeric role, and all string types perform the Stringy role, but there's no such thing as a "Numeric" object, since these are generic types that must be instantiated with extra arguments to produce normal object types. Common roles include:


The Num and Rat Types

Perl 6 intrinsically supports big integers and rationals through its system of type declarations. Int automatically supports promotion to arbitrary precision, as well as holding Inf and NaN values. Note that Int assumes 2's complement arithmetic, so +^1 == -2 is guaranteed. (Native int operations need not support this on machines that are not natively 2's complement. You must convert to and from Int to do portable bitops on such ancient hardware.)

Num must support the largest native floating point format that runs at full speed. It may be bound to an arbitrary precision type, but by default it is the same type as a native num. See below.

Rat supports extended precision rational arithmetic. Dividing two Integral objects using infix:</> produces a a Rat, which is generally usable anywhere a Num is usable, but may also be explicitly cast to Num. (Also, if either side is Num already, infix:</> gives you a Num instead of a Rat.)

Rat and Num both do the Real role.

Lowercase types like int and num imply the native machine representation for integers and floating-point numbers, respectively, and do not promote to arbitrary precision, though larger representations are always allowed for temporary values. Unless qualified with a number of bits, int and num types represent the largest native integer and floating-point types that run at full speed.

Numeric values in untyped variables use Int and Num semantics rather than int and num.

However, for pragmatic reasons, Rat values are guaranteed to be exact only up to a certain point. By default, this is the precision that would be represented by the Rat64 type, which is an alias for Rational[Int,Uint64], which has a numerator of Int but is limited to a denominator of Uint64 (which may or may not be implemented as a native uint64, since small representations may be desirable for small denominators). A Rat64 that would require more than 64 bits of storage in the denominator is automatically converted either to a Num or to a lesser-precision Rat, at the discretion of the implementation. (Native types such as rat64 limit the size of both numerator and denominator, though not to the same size. The numerator should in general be twice the size of the denominator to support user expectations. For instance, a rat8 actually supports Rational[int16,uint8], allowing numbers like 100.01 to be represented, and a rat64, defined as Rational[int128,int64], can hold the number of seconds since the Big Bang with attosecond precision. Though perhaps not with attosecond accuracy...)

The limitation on Rat values is intended to be enforced only on user-visible types. Intermediate values used internally in calculation the values of Rat operators may exceed this precision, or represent negative denominators. That is, the temporaries used in calculating the new numerator and denominator are (at least in the abstract) of Int type. After a new numerator and denominator are determined, any sign is forced to be represented only by the numerator. Then if the denominator exceeds the storage size of the unsigned integer used, the fraction is reduced via gcd. If the resulting denominator is still larger than the storage size, then and only then may the precision be reduced to fit into a Rat or Num.

Rat addition and subtraction should attempt to preserve the denominator of the more precise argument if that denominator is an integral multiple of the less precise denominator. That is, in practical terms, adding a column of dollars and cents should generally end up with a result that has a denominator of 100, even if values like 42 and 3.5 were added in. With other operators, this guarantee cannot be made; in such cases, the user should probably be explicitly rounding to a particular denominator anyway.

For applications that really need arbitrary precision denominators as well as numerators at the cost of performance, FatRat may be used, which is defined as Rational[Int,Int], that is, as arbitrary precision in both parts. There is no literal form for a FatRat, so it must be constructed using$nu,$de). In general, only math operators with at least one FatRat argument will return another FatRat, to prevent accidental promotion of reasonably fast Rat values into arbitrarily slow FatRat values.

Although most rational implementations normalize or "reduce" fractions to their smallest representation immediately through a gcd algorithm, Perl allows a rational datatype to do so lazily at need, such as whenever the denominator would run out of precision, but avoid the overhead otherwise. Hence, if you are adding a bunch of Rats that represent, say, dollars and cents, the denominator may stay 100 the entire way through. The .nu and .de methods will return these unreduced values. You can use $rat.=norm to normalize the fraction. (This also forces the sign on the denominator to be positive.) The .perl method will produce a decimal number if the denominator is a power of 10, or normalizable to a power of 10 (that is, having factors of only 2 and 5 (and -1)). Otherwise it will normalize and return a rational literal of the form <-47/3>. Stringifying a rational via .gist or .Str returns an exact decimal number if possible, and otherwise rounds off the repeated decimal based on the size of the denominator. For full details see the documentation of Rat.gist in S32.

Num.Str and Num.gist both produce valid Num literals, so they must include the e for the exponential.

say 1/5;    # 0.2 exactly
say 1/3;    # 0.333333 

say <2/6>.perl
            # <1/3>

say 3.14159_26535_89793
            # 3.141592653589793 including last digit

say 111111111111111111111111111111111111111111111.123
            # 111111111111111111111111111111111111111111111.123

say 555555555555555555555555555555555555555555555/5
            # 111111111111111111111111111111111111111111111

say <555555555555555555555555555555555555555555555/5>.perl
            # <111111111111111111111111111111111111111111111/1>
say 2e2;    # 200e0 or 2e2 or 200.0e0 or 2.0e2

Infinity and NaN

Perl 6 by default makes standard IEEE floating point concepts visible, such as Inf (infinity) and NaN (not a number). Within a lexical scope, pragmas may specify the nature of temporary values, and how floating point is to behave under various circumstances. All IEEE modes must be lexically available via pragma except in cases where that would entail heroic efforts to bypass a braindead platform.

The default floating-point modes do not throw exceptions but rather propagate Inf and NaN. The boxed object types may carry more detailed information on where overflow or underflow occurred. Numerics in Perl are not designed to give the identical answer everywhere. They are designed to give the typical programmer the tools to achieve a good enough answer most of the time. (Really good programmers may occasionally do even better.) Mostly this just involves using enough bits that the stupidities of the algorithm don't matter much.

Strings, the Str Type

A Str is a Unicode string object. There is no corresponding native str type. However, since a Str object may fill multiple roles, we say that a Str keeps track of its minimum and maximum Unicode abstraction levels, and plays along nicely with the current lexical scope's idea of the ideal character, whether that is bytes, codepoints, graphemes, or characters in some language.

The StrPos Type

For all builtin operations, all Str positions are reported as position objects, not integers. These StrPos objects point into a particular string at a particular location independent of abstraction level, either by tracking the string and position directly, or by generating an abstraction-level independent representation of the offset from the beginning of the string that will give the same results if applied to the same string in any context. This is assuming the string isn't modified in the meanwhile; a StrPos is not a "marker" and is not required to follow changes to a mutable string. For instance, if you ask for the positions of matches done by a substitution, the answers are reported in terms of the original string (which may now be inaccessible!), not as positions within the modified string.

The StrLen Type

The subtraction of two StrPos objects gives a StrLen object, which is also not an integer, because the string between two positions also has multiple integer interpretations depending on the units. A given StrLen may know that it represents 7 codepoints, 3 graphemes, and 1 letter in Malayalam, but it might only know this lazily because it actually just hangs onto the two StrPos endpoints within the string that in turn may or may not just lazily point into the string. (The lazy implementation of StrLen is much like a Range object in that respect.)

Units of Position Arguments

If you use integers as arguments where position objects are expected, it will be assumed that you mean the units of the current lexically scoped Unicode abstraction level. (Which defaults to graphemes.) Otherwise you'll need to coerce to the proper units:

substr($string, Bytes(42), ArabicChars(1))

Of course, such a dimensional number will fail if used on a string that doesn't provide the appropriate abstraction level.

Numeric Coercion of StrPos or StrLen

If a StrPos or StrLen is forced into a numeric context, it will assume the units of the current Unicode abstraction level. It is erroneous to pass such a non-dimensional number to a routine that would interpret it with the wrong units.

Implementation note: since Perl 6 mandates that the default Unicode processing level must view graphemes as the fundamental unit rather than codepoints, this has some implications regarding efficient implementation. It is suggested that all graphemes be translated on input to a unique grapheme numbers and represented as integers within some kind of uniform array for fast substr access. For those graphemes that have a precomposed form, use of that codepoint is suggested. (Note that this means Latin-1 can still be represented internally with 8-bit integers.)

For graphemes that have no precomposed form, a temporary private id should be assigned that uniquely identifies the grapheme. If such ids are assigned consistently throughout the process, comparison of two graphemes is no more difficult than the comparison of two integers, and comparison of base characters no more difficult than a direct lookup into the id-to-NFD table.

Obviously, any temporary grapheme ids must be translated back to some universal form (such as NFD) on output, and normal precomposed graphemes may turn into either NFC or NFD forms depending on the desired output. Maintaining a particular grapheme/id mapping over the life of the process may have some GC implications for long-running processes, but most processes will likely see a limited number of non-precomposed graphemes.

If the program has a scope that wants a codepoint view rather than a grapheme view, the string visible to that lexical scope must also be translated to universal form, just as with output translation. Alternately, the temporary grapheme ids may be hidden behind an abstraction layer. In any case, codepoint scope should never see any temporary grapheme ids. (The lexical codepoint declaration should probably specify which normalization form it prefers to view strings under. Such a declaration could be applied to input translation as well.)

The Buf Type

A Buf is a stringish view of an array of integers, and has no Unicode or character properties without explicit conversion to some kind of Str. (The buf8, buf16, buf32, and buf64 types are the native counterparts; native buf types are required to occupy contiguous memory for the entire buffer.) Typically a Buf is an array of bytes serving as a buffer. Bitwise operations on a Buf treat the entire buffer as a single large integer. Bitwise operations on a Str generally fail unless the Str in question can provide an abstract Buf interface somehow. Coercion to Buf should generally invalidate the Str interface. As a generic role Buf may be instantiated as any of buf8, buf16, or buf32 (or as any type that provides the appropriate Buf interface), but when used to create a buffer Buf is punned to a class implementing buf8 (actually Buf[uint8]).

Unlike Str types, Buf types prefer to deal with integer string positions, and map these directly to the underlying compact array as indices. That is, these are not necessarily byte positions--an integer position just counts over the number of underlying positions, where one position means one cell of the underlying integer type. Builtin string operations on Buf types return integers and expect integers when dealing with positions. As a limiting case, buf8 is just an old-school byte string, and the positions are byte positions. Note, though, that if you remap a section of buf32 memory to be buf8, you'll have to multiply all your positions by 4.

Native buf Types

These native types are defined based on the Buf role, parameterized by the native integer type it is composed of:

Name        Is really
====        =========
buf1        Buf[bit]
buf8        Buf[uint8]
buf16       Buf[uint16]
buf32       Buf[uint32]
buf64       Buf[uint64]

There are no signed buf types provided as built-ins, but you may say


to get buffers of signed integers. It is also possible to define a Buf based on non-integers or on non-native types:


However, no guarantee of memory contiguity can be made for non-native types.

The utf8 Type

The utf8 type is derived from buf8, with the additional constraint that it may only contain validly encoded UTF-8. Likewise, utf16 is derived from buf16, and utf32 from buf32.

Note that since these are type names, parentheses must always be used to call them as coercers, since the listop form is not allowed for coercions. That is:

utf8 op $x

is always parsed as

(utf8) op $x

and never as

utf8(op $x)

The Whatever Object

The * character as a standalone term captures the notion of "Whatever", the meaning of which can be decided lazily by whatever it is an argument to. Alternately, for those unary and binary operators that don't care to handle * themselves, it is automatically primed at compile time into a closure that takes one or two arguments. (See below.)

Generally, when an operator handles * itself, it can often be thought of as a "glob" that gives you everything it can in that argument position. For instance, here are some operators that choose to handle * and give it special meaning:

if $x ~~ 1..* {...}                 # if 1 <= $x <= +Inf
my ($a,$b,$c) = "foo" xx *;         # an arbitrary long list of "foo"
if /foo/ ff * {...}                 # a latching flipflop
@slice = @x[*;0;*];                 # all indexes for 1st and 3rd dimensions
@slice = %x{*;'foo'};               # all keys in domain of 1st dimension
@array[*]                           # list of all values, unlike @array[]
(*, *, $x) = (1, 2, 3);             # skip first two elements
                                    # (same as lvalue "undef" in Perl 5)

Whatever is an undefined prototype object derived from Any. As a type it is abstract, and may not be instantiated as a defined object. When used for a particular MMD dispatch, and nothing in the MMD system claims it, it dispatches to as an Any with an undefined value, and (we hope) blows up constructively.

Since the Whatever object is effectively immutable, the optimizer is free to recognize * and optimize in the context of what operator it is being passed to. An operator can declare that it wants to handle * either by declaring one or more of its arguments for at least one of its candidates with an argument of type Whatever, or by marking the proto sub with the trait, is like-Whatever-and-stuff. [Conjecture: actually, this is negotiable--we might shorten it to is like(Whatever) or some such. :-)]

Autopriming of Unary and Binary Operators with Whatever

Perl 6 has several ways of performing partial function application. Since this is an unwieldy term, we've settled on calling it priming. (Many folks call this "currying", but that's not really a correct technical usage of the term.) Most generally, priming is performed on a Callable object by calling its .assuming method, described elsewhere. This section is about a convenient syntactic sugar for that.

For any unary or binary operator (specifically, any prefix, postfix, and infix operator), if the operator has not specifically requested (via signature matching) to handle * itself, the compiler is required to translate directly to an appropriately primed closure at compile time. We call this autopriming. Most of the built-in numeric operators fall into this category. So:

* - 1
'.' x *
* + *

are autoprimed into closures of one or two arguments:

{ $^x - 1 }
{ '.' x $^y }
{ $^x + $^y }

This rewrite happens after variables are looked up in their lexical scope, and after declarator install any variables into the lexical scope, with the result that

* + (state $s = 0)

is effectively primed into:

-> $x { $x + (state $OUTER::s = 0) }

rather than:

-> $x { $x + (state $s = 0) }

In other words, * priming does not create a useful lexical scope. (Though it does have a dynamic scope when it runs.) This prevents the semantics from changing drastically if the operator in question suddenly decides to handle Whatever itself.

As a postfix operator, a method call is one of those operators that is automatically primed. Something like:


is rewritten as:

{ $^x.meth(1,2,3) }

In addition to priming a method call without an invocant, such primed methods are handy anywhere a smartmatcher is expected:

@primes = grep *.prime, 2..*;
subset Duck where *.^can('quack');
when !*.defined {...}

The WhateverCode Types

These returned closures are of type WhateverCode:($) or WhateverCode:($,$) rather than type Whatever, so constructs that do want to handle * or its derivative closures can distinguish them by type:

@array[*]    # subscript is type Whatever, returns all elements
@array[*-1]  # subscript is type WhateverCode:($), returns last element

0, 1, *+1 ... *  # counting
0, 1, *+* ... *  # fibonacci

For any prefix, postfix, or infix operator that would be primed by a Whatever, a WhateverCode also autoprimes it, such that any noun phrase based on * as a head noun autoprimes transitively outward as far as it makes sense, including outward through metaoperators. Hence:

* + 2 + 3   # { $^x + 2 + 3 }
* + 2 + *   # { $^x + 2 + $^y }
* + * + *   # { $^x + $^y + $^z }
(-*.abs)i   # { (-$^x.abs)i }
@a «+» *    # { @a «+» $^x }

Operators with idiosyncratic Whatever

The above is only for operators that are not Whatever-aware. There is no requirement that a Whatever-aware operator return a WhateverCode when Whatever is used as an argument; that's just the typical behavior for functions that have no intrinsic "globbish" meaning for *. If you want to prime one of these globbish operators, you'll need to write an explicit closure or do an explicit priming on the operator with .assuming(). Operators in this class, such as infix:<..> and infix:<xx>, typically do autoprime arguments of type WhateverCode even though they do not autoprime Whatever, so we have:

"foo" xx *          # infinite supply of "foo"
"foo" xx *-1        # { "foo" xx $^a - 1 }
0 .. *              # half the real number line
0 .. * - 1          # { 0 .. $^a - 1 }
* - 3 .. * - 1      # { $^a - 3 .. $^b - 1 }

(If the last is used as a subscript, the subscripter notices there are two arguments and passes that dimension's size twice.)

Non-closure-returning Operators with *

Operators that are known to return non-closure values with * include:

0 .. *      # means 0 .. Inf
0 ... *     # means 0 ... Inf
'a' xx *    # means 'a' xx Inf
1,*         # means 1,*  :)

$a = *      # just assigns Whatever
$a ~~ *     # just matches Whatever

Note that the last two also do not autoprime WhateverCode, because assignment and smartmatching are not really normal binary operators, but syntactic sugar for underlying primitives. (Such pseudo operators may also place restrictions on which meta-operators work on them.)

Neither do the sequence operators &infix:<...> and &infix:<...^> autoprime WhateverCode, because we want to allow WhateverCode closures as the stopper:

0 ...^ *>5  # means 0, 1, 2, 3, 4, 5

[Conjecture: it is possible that, for most of the above operators that take * to mean Inf, we could still actually return a closure that defaults that particular argument to Inf. However, this would work only if we provide a "value list context" that forbids closures, in the sense that it always calls any closure it finds in its list and replaces the closure in the list with its return value or values, and then rescans from that point (kinda like a text macro does), in case the closure returned a list containing a closure. So for example, the closure returned by 0..* would interpolate a Range object into the list when called. Alternately, it could return the 0, followed by another closure that does 1..*. Even the ... operator could likely be redefined in terms of a closure that regenerates itself, as long as we figure out some way of remembering the last N values each time.]

In any case, array indexes must behave as such a 'value list context', since you can't directly index an array with anything other than a number. The final element of an array is subscripted as @a[*-1], which means that when the subscripting operation discovers a Code:($) object for a subscript, it calls it and supplies an argument indicating the number of elements in (that dimension of) the array. See S09.

The HyperWhatever Type

A variant of * is the ** term, which is of type HyperWhatever. It is generally understood to be a multidimension form of * when that makes sense. When modified by an operator that would turn * into a function of one argument, WhateverCode:($), ** instead turns into a function with one slurpy argument, Code(*@), such that multiple arguments are distributed to some number of internal whatevers. That is:

* - 1    means                -> $x { $x - 1 }
** - 1   means   -> *@x { map -> $x { $x - 1 }, @x }

Therefore @array[^**] represents @array[{ map { ^* }, @_ }], that is to say, every element of the array, no matter how many dimensions. (However, @array[**] means the same thing because (as with ... above), the subscript operator will interpret bare ** as meaning all the subscripts, not the list of dimension sizes. The meaning of Whatever is always controlled by the first context it is bound into.)

Other uses for * and ** will doubtless suggest themselves over time. These can be given meaning via the MMD system, if not the compiler. In general a Whatever should be interpreted as maximizing the degrees of freedom in a dwimmy way, not as a nihilistic "don't care anymore--just shoot me".

Native types

Values with these types autobox to their uppercase counterparts when you treat them as objects:

bit         single native bit
int         native signed integer
uint        native unsigned integer (autoboxes to Int)
buf         native buffer (finite seq of native ints or uints, no Unicode)
rat         native rational
num         native floating point
complex     native complex number
bool        native boolean

Since native types cannot represent Perl's concept of undefined values, in the absence of explicit initialization, native floating-point types default to NaN, while integer types (including bit) default to 0. The complex type defaults to NaN + NaN\i. A buf type of known size defaults to a sequence of 0 values.

You can set a different default on any container type by use of a trait such as is default(42). Deleting or undefining such a container sets the contents back to the default value (or optionally removes it in cases where the default value can be autovivified on demand).

If you wish for a native declaration to attempt no initialization, but leave whatever garbage was in memory, you may use the is default(*) trait. There are several use cases for this, if you know you're going to initialize the memory otherwise, or you're doing some form of memory mapping.

If a buf type is initialized with a Unicode string value, the string is decomposed into Unicode codepoints, and each codepoint shoved into an integer element. If the size of the buf type is not specified, it takes its length from the initializing string. If the size is specified, the initializing string is truncated or 0-padded as necessary. If a codepoint doesn't fit into a buf's integer type, a parse error is issued if this can be detected at compile time; otherwise a warning is issued at run time and the overflowed buffer element is filled with an appropriate replacement character, either U+FFFD (REPLACEMENT CHARACTER) if the element's integer type is at least 16 bits, or U+007f (DELETE) if the larger value would not fit. If any other conversion is desired, it must be specified explicitly. In particular, no conversion to UTF-8 or UTF-16 is attempted; that must be specified explicitly. (As it happens, conversion to a buf type based on 32-bit integers produces valid UTF-32 in the native endianness.)

The Mu type

Among other things, Mu is named after the eastern concept of "Mu" or 無 (see, especially the "Mu_(negative)" entry), so in Perl 6 it stands in for Perl 5's concept of "undef" when that is used as a noun. However, Mu is also the "nothing" from which everything else is derived via the undefined type objects, so it stands in for the concept of "Object" as used in languages like Java. Or think of it as a "micro" or µ-object that is the basis for all other objects, something atomic like a Muon. Or if acronyms make you happy, there are a variety to pick from:

Most Universal
More Undefined
Modern Undef
Master Union
Meta Ur
Mega Up

Or just think of it as a sound a cow makes, which simultaneously means everything and nothing.

Undefined types

Perl 6 does not have a single value representing undefinedness. Instead, objects of various types can carry type information while nevertheless remaining undefined themselves. Whether an object is defined is determined by whether .defined returns true or not. These typed objects typically represent uninitialized values. Failure objects are also officially undefined despite carrying exception information; these may be created using the fail function, or by direct construction of a Failure object of some sort. (See S04 for how failures are handled.)

Mu          Most Undefined
Failure     Failure (lazy exceptions, thrown if not handled properly)

Whenever you declare any kind of type, class, module, or package, you're automatically declaring a undefined prototype value with the same name, known as the type object. The name itself returns that type object:

Mu          Perl 6 object (default block parameter type, Any, Junction, or Each)
Any         Perl 6 object (default routine parameter type, excludes Junction, Failure)
Cool        Perl 6 Convenient OO Loopbacks
Whatever    Wildcard (like Any, but subject to do-what-I-mean via MMD)
Int         Any Int object
Widget      Any Widget object

All user-defined classes derive from the Any class by default. The Whatever type is derived from Any but nothing else is derived from it.

Type objects stringify to their name with empty parens concatenated, which can be read as a coercion from Nil to a value of that type. Note that type objects are not classes, but may be used to name classes when the type's associated meta-object allows it:        # create a new Widget

The Any type encompasses all normal value and object types. It is the unit type, but includes units that are containers of multiple values. It is not the most general type, however. Any derives from Mu, which is the top type in Perl 6, and encompasses certain conceptual types that fall outside the realm of ordinary Any values. These conceptual types include:

Junction    unordered superposition of data with and/or/one/none
Each        ordered superposition (conjectural)
Failure     a lazy exception

Conceptual types rely on the failure to match an Any type in order to trigger various extraordinary behaviors. The Junction and Each types trigger an inside-out linguistic distribution of various list behaviors from inside a scalar expression that pretends a bunch of values are really a single value. (These are modelled on similar linguistic behaviors in English.) The distrubutional behavior triggered for these types is known as autothreading.

The Failure type is considered conceptual so that dynamic context can determine the treatment of failures that in other languages would always throw exceptions. This gives Perl 6 programs the flexibility to handle exceptions either in-band or out-of-band. It is particularly important to be able to handle exceptions in-band when you are trying to perform parallel operations, so that the failure of one computation does not result in fratricide of all its fellow computations. (You can think of this as analogous to the way NaN propagates through floating-point calculations.)

Single dispatch of a Failure invocant to any method not in Failure returns the same Failure, so that cascaded method calls can be checked with a single check:

$object.fee.fie.[$foe].{$foo}.sic // die "Oops: $!";

Failures may only be passed into functions via parameters that allow Mu or Failure. As a special case, a Failure may be returned from a function even if that function declares a return type constraint that does not include the Failure type. (In fact, the attempt to return a value that doesn't match the return constraint will internally call fail, and that failure will be returned according to standard fail policy, which is dependent on the preferences of the caller.) After the failure is returned, any subsequent attempt to use the failure in an Any context will be subject to further failure analysis, and will likely throw an exception immediately. Likewise, discarding the failure in sink context produces an immediate exception. It is assumed that this downstream failure processing is robust enough that the optimizer is allowed to assume that a function returns what it declares as its return type, and most of the time omit the check for failure on the return value. Nearly all the failure checks are already enforced downstream by the smartmatcher, usually through the binder.

Note that a Failure object is undefined, but may contain one or more defined Exception objects, which are considered a normal objects that just happen to be used in exception throwing and handling.

Immutable types

Objects with these types behave like values, i.e. $x === $y is true if and only if their types and contents are identical (that is, if $x.WHICH eqv $y.WHICH).

Str         Perl string (finite sequence of Unicode characters)
Bit         Perl single bit (allows traits, aliasing, undefinedness, etc.)
Int         Perl integer (allows Inf/NaN, arbitrary precision, etc.)
Num         Perl number (approximate Real, generally via floating point)
Rat         Perl rational (exact Real, limited denominator)
FatRat      Perl rational (unlimited precision in both parts)
Complex     Perl complex number
Bool        Perl boolean
Exception   Perl exception
Block       Executable objects that have lexical scopes
Range       A pair of Ordered endpoints
Set         Unordered collection of values that allows no duplicates
Bag         Unordered collection of values that allows duplicates
Enum        An immutable Pair
EnumMap     A mapping of Enums with no duplicate keys
Signature   Function parameters (left-hand side of a binding)
Parcel      Arguments in a comma list
LoL         Arguments in a semicolon list
Capture     Function call arguments (right-hand side of a binding)
Blob        An undifferentiated mass of ints, an immutable Buf
Instant     A point on the continuous atomic timeline
Duration    The difference between two Instants
HardRoutine A routine that is committed to not changing

Set values may be composed with the set listop or method. Bag values may be composed with the bag listop or method.

Instants and Durations are measured in atomic seconds with fractions. Notionally they are real numbers which may be implemented in any Real type of sufficient precision, preferably a Rat or FatRat. (Implementations that make fixed-point assumptions about the available subsecond precision are discouraged; the user interface must act like real numbers in any case.) Interfaces that take Duration arguments, such as sleep(), may also take Real arguments, but Instant arguments must be explicitly created via any of various culturally aware time specification APIs. A small number of Instant values that represent common epoch instant values are also available.

In numeric context a Duration happily returns a Rat or FatRat representing the number of seconds. Instant values, on the other hand, are largely opaque, numerically speaking, and in particular are epoch agnostic. (Any epoch is just a particular Instant, and all times related to that epoch are really Instant ± Duration, which returns a new Instant.) In order to facilitate the writing of culturally aware time modules, the Instant type provides Instant values corresponding to various commonly used epochs, such as the 1958 TAI epoch, the POSIX epoch, the Mac epoch, and perhaps the year 2000 epoch as UTC thinks of it. There's no reason to exclude any useful epoch that is well characterized in atomic seconds. All normal times can be calculated from those epoch instants using addition and subtraction of Duration values. Note that the Duration values are still just atomic time without any cultural deformations; in particular, the Duration formed of by subtracting Instant::Epoch::POSIX from the current instant will contain more seconds than the current POSIX time() due to POSIX's abysmal ignorance of leap seconds. This is not the fault of the universe, which is not fooled (neglecting relativistic considerations). Instants and Durations are always linear atomic seconds. Systems which cannot officially provide a steady time base, such as POSIX systems, will simply have to make their best guess as to the correct atomic time when asked to interconvert between cultural time and atomic time. Alternately, they may use some other less-official time mechanism to achieve steady clock behavior. Most Unix systems can count clock ticks, even if POSIX time types get confused.

Although the conceptual type of an Instant resembles FatRat, with arbitrarily large size in either numerator or denominator, the internal form may of course be optimized internally for "nearby" times, so that, if we know the year as an integer, the instant within the year can just be a Rat representing the offset from the beginning of the year. Calculations that fall within the same year can then be done in Rat rather than FatRat, or a table of yearly offsets can find the difference in integer seconds between two years, since (so far) nobody has had the nerve to propose fractional leap seconds. Or whatever. Instant is opaque, so we can swap implementations in and out without user-visible consequences.

The term now returns the current time as an Instant. As with the rand and self terms, it is not a function, so don't put parens after it. It also never looks for arguments, so the next token should be an operator or terminator.

now + 300   # the instant five minutes from now

Basic math operations are defined for instants and durations such that the sum of an instant and a duration is always an instant, while the difference of two instants is always a duration. Math on instants may only be done with durations (or numbers that will be taken as durations, as above); you may not add two instants.

$instant + $instant      # WRONG
$instant - $instant      # ok, returns a duration
$instant + $duration     # ok, returns an instant

Numeric operations on durations return Duration where that makes sense (addition, subtraction, modulus). The type returned for other numeric operations is unspecified; they may return normal numeric types or they may return other dimensional types that attempt to assist in dimensional analysis. (The latter approach should likely require explicit declaration for now, until we can demonstrate that it does not adversely impact the average programmer, and that it plays well with the concept of gradual typing.)

The Blob type is like an immutable buffer, and therefore responds both to array and (some) stringy operations. Note that, like a Buf, its size is measured in whatever the base unit is, which is not always bytes. If you have a my Blob[bit] $blob, then $blob.elems returns the number of bits in it. As with buffers, various native types are automatically derived from native unsigned int types:

blob1       Blob[bit], a bit string
blob2       Blob[uint2], a DNA sequence?
blob3       Blob[uint[3]], an octal string
blob4       Blob[uint4], a hex string
blob8       Blob[uint8], a byte string
blob16      Blob[uint16]
blob32      Blob[uint32]
blob64      Blob[uint64]

These types do (at least) the following roles:

Class       Roles
=====       =====
Str         Stringy
Bit         Numeric Boolean Integral
Int         Numeric Real Integral
Num         Numeric Real
Rat         Numeric Real Rational
FatRat      Numeric Real Rational
Complex     Numeric
Bool        Boolean
Block       Callable
Range       Iterable
Set         Associative[Bool] Iterable
Bag         Associative[UInt] Iterable
Enum        Associative
EnumMap     Associative Positional Iterable
Parcel      Positional
Capture     Positional Associative
Blob        Stringy Positional
Instant     Numeric Real
Duration    Numeric Real
HardRoutine Routine

[Conjecture: Stringy may best be split into 2 roles where both Str and Blob compose the more general one and just Str composes a less general one. The more general of those would apply to what is common to any dense sequence ("string") that Str and Blob both are (either of characters or bits or integers etc), and the string operators like catenation (~) and replication (x, xx) would be part of the more general role. The more specific role would apply to Str but not Blob and includes any specific operators that are specific to characters and don't apply to bits or integers etc. The other alternative is to more clearly distance character strings from bit strings, keeping ~/etc for character strings only and adding an analogy for bit strings.]

The Iterable role indicates not that you can iterate the type directly, but that you can request the type to return an iterator. Iterable types may have multiple iterators (lists) running across them simultaneously, but an iterator/list itself has only one thread of consumption. Every time you do get on an iterator, a value disappears from its list.

Note that Set and Bag iterators return only keys, not values. You must explicitly use c<.pairs> to get key/value pairs.

Mutable types

Objects with these types have distinct .WHICH values that do not change even if the object's contents change. (Routines are considered mutable because they can be wrapped in place.)

Iterator    Perl list
SeqIter     Iterator over a Seq
RangeIter   Iterator over a Range
Scalar      Perl scalar
Array       Perl array
Hash        Perl hash
KeySet      KeyHash of Bool (does Set in list/array context)
KeyBag      KeyHash of UInt (does Bag in list/array context)
Pair        A single key-to-value association
Buf         Perl buffer (array of integers with some stringy features)
IO          Perl filehandle
Routine     Base class for all wrappable executable objects
Sub         Perl subroutine
Method      Perl method
Submethod   Perl subroutine acting like a method
Macro       Perl compile-time subroutine
Regex       Perl pattern
Match       Perl match, usually produced by applying a pattern
Stash       A symbol table hash (package, module, class, lexpad, etc)
SoftRoutine A routine that is committed to staying mutable

The KeyHash role differs from a normal Associative hash in how it handles default values. If the value of a KeyHash element is set to the default value for the KeyHash, the element is deleted. If undeclared, the default default for a KeyHash is 0 for numeric types, False for boolean types, and the null string for string and buffer types. A KeyHash of an object type defaults to the undefined prototype for that type. More generally, the default default is whatever defined value a Nil would convert to for that value type. A KeyHash of Scalar deletes elements that go to either 0 or the null string. A KeyHash also autodeletes keys for normal undefined values (that is, those undefined values that do not contain an unthrown exception).

A KeySet is a KeyHash of booleans with a default of False. If you use the Hash interface and increment an element of a KeySet its value becomes true (creating the element if it doesn't exist already). If you decrement the element it becomes false and is automatically deleted. Decrementing a non-existing value results in a False value. Incrementing an existing value results in True. When not used as a Hash (that is, when used as an Array or list or Set object) a KeySet behaves as a Set of its keys. (Since the only possible value of a KeySet is the True value, it need not be represented in the actual implementation with any bits at all.)

A KeyBag is a KeyHash of UInt with default of 0. If you use the Hash interface and increment an element of a KeyBag its value is increased by one (creating the element if it doesn't exist already). If you decrement the element the value is decreased by one; if the value goes to 0 the element is automatically deleted. An attempt to decrement a non-existing value returns a Failure value. When not used as a Hash (that is, when used as an Array or list or Bag object) a KeyBag behaves as a Bag of its keys, with each key replicated the number of times specified by its corresponding value. (Use .kv or .pairs to suppress this behavior in list context.)

As with Hash types, Pair and PairSeq are mutable in their values but not in their keys. (A key can be a reference to a mutable object, but cannot change its .WHICH identity. In contrast, the value may be rebound to a different object, just as a hash element may.)

The following roles are supported:

Iterator    List
Array       Positional Iterable
Hash        Associative
KeySet      KeyHash[Bool]
KeyBag      KeyHash[UInt]
KeyHash     Associative
Pair        Associative
PairSeq     Associative Positional Iterable
Buf         Stringy
Routine     Callable
Sub         Callable
Method      Callable
Submethod   Callable
Macro       Callable
Regex       Callable
Match       Positional Associative
Stash       Associative
SoftRoutine Routine

Types that do the List role are generally hidden from casual view, since iteration is typically triggered by context rather than by explicit call to the iterator's .get method. Filehandles are a notable exception.

See "Wrapping" in S06 for a discussion of soft vs. hard routines.

Of types

Explicit types are optional. Perl variables have two associated types: their "of type" and their "container type". (More generally, any container has a container type, including subroutines and modules.) The of type is stored as its of property, while the container type of the container is just the object type of the container itself. The word returns is allowed as an alias for of.

The of type specifies what kinds of values may be stored in the variable. An of type is given as a prefix or with the of keyword:

my Dog $spot;
my $spot of Dog;

In either case this sets the of property of the container to Dog.

An of type on an array or hash specifies the type stored by each element:

my Dog @pound;  # each element of the array stores a Dog

my Rat %ship;   # the value of each entry stores a Rat

The key type of a hash may be specified as a shape trait--see S09.

Containers enforce type safety on setting, whereas subroutines enforce type safety on return. The returns declarations is an alias for the of type of a subroutine.

sub get_pet() of Animal {...}       # of type, obviously
sub get_pet() returns Animal {...}  # of type
our Animal sub get_pet() {...}      # of type

To coerce your return value, use a coercion type:

sub get_pet() returns Pet(Animal) {...}  # coerce any Animal to Pet

For a container, however, use of a coercion type as the of coerces upon setting rather than returning the value.

Container types

The container type specifies how the variable itself is implemented. It is given as a trait of the variable:

my $spot is Scalar;             # this is the default
my $spot is PersistentScalar;
my $spot is DataBase;

Defining a container type is the Perl 6 equivalent to tying a variable in Perl 5. But Perl 6 variables are tied directly at declaration time, and for performance reasons may not be tied with a run-time tie statement unless the variable is explicitly declared with a container type that does the Tieable role.

However, package variables are always considered Tieable by default. As a consequence, all named packages are also Tieable by default. Classes and modules may be viewed as differently tied packages. Looking at it from the other direction, classes and modules that wish to be bound to a global package name must be able to do the Package role.

Hierarchical types

A non-scalar type may be qualified, in order to specify what type of value each of its elements stores:

my Egg $cup;                       # the value is an Egg
my Egg @carton;                    # each elem is an Egg
my Array of Egg @box;              # each elem is an array of Eggs
my Array of Array of Egg @crate;   # each elem is an array of arrays of Eggs
my Hash of Array of Recipe %book;  # each value is a hash of arrays of Recipes

Each successive of makes the type on its right a parameter of the type on its left. Parametric types are named using square brackets, so:

my Hash of Array of Recipe %book;

actually means:

my Hash:of(Array:of(Recipe)) %book;

Because the actual variable can be hard to find when complex types are specified, there is a postfix form as well:

my Hash of Array of Recipe %book;           # HoHoAoRecipe
my %book of Hash of Array of Recipe;        # same thing

Alternately, the return type may be specified within the signature:

my sub get_book ($key --> Hash of Array of Recipe) {...}

You may also specify the type as the of trait (with returns allowed as a synonym):

my Hash of Array of Recipe sub get_book ($key) {...}
my sub get_book ($key) of Hash of Array of Recipe {...}
my sub get_book ($key) returns Hash of Array of Recipe {...}

Polymorphic types (Conjectural)

Anywhere you can use a single type you can use a set of types, for convenience specifiable as if it were an "or" junction:

my Int|Str $error = $val;              # can assign if $val~~Int or $val~~Str

Fancier type constraints may be expressed through a subtype:

subset Shinola of Any where {.does(DessertWax) and .does(FloorTopping)};
if $shimmer ~~ Shinola {...}  # $shimmer must do both interfaces

Since the terms in a parameter could be viewed as a set of constraints that are implicitly "anded" together (the variable itself supplies type constraints, and where clauses or tree matching just add more constraints), we relax this to allow juxtaposition of types to act like an "and" junction:

# Anything assigned to the variable $mitsy must conform
# to the type Fish and either the Squirrel or Dog type...
my Squirrel|Dog Fish $mitsy = new Fish but { Bool.pick ?? .does Squirrel
                                                       !! .does Dog };

[Note: the above is a slight lie, insofar as parameters are currently restricted for 6.0.0 to having only a single main type for the formal variable until we understand MMD a bit better.]

Parameter types

Parameters may be given types, just like any other variable:

sub max (int @array is rw) {...}
sub max (@array of int is rw) {...}

Generic types

Within a declaration, a class variable (either by itself or following an existing type name) declares a new type name and takes its parametric value from the actual type of the parameter it is associated with. It declares the new type name in the same scope as the associated declaration.

sub max (Num ::X @array) {
    push @array,;

The new type name is introduced immediately, so two such types in the same signature must unify compatibly if they have the same name:

sub compare (Any ::T $x, T $y) {
    return $x eqv $y;

The Cool class (and package)

The Cool type is derived from Any, and contains all the methods that are "cool" (as in, "I'm cool with an argument of that type.").

More specifically, these are the methods that are culturally universal, insofar as the typical user will expect the name of the method to imply conversion to a particular built-in type that understands the method in question. For instance, $x.abs implies conversion to an appropriate numeric type if $x is "cool" but doesn't already support a method of that name. Conversely, $x.substr implies conversion to a string or buffer type.

The Cool module also contains all multisubs of last resort; these are automatically searched if normal multiple dispatch does not find a viable candidate. Note that the Cool package is mutable, and both single and multiple dispatch must take into account changes there for the purposes of run-time monkey patching. However, since the multiple dispatcher uses the Cool package only as a failover, compile-time analysis of such dispatches is largely unaffected for any arguments with an exact or close match. Likewise any single dispatch a method that is more specific than the Cool class is not affected by the mutability of Cool. User-defined classes don't derive from Cool by default, so such classes are also unaffected by changes to Cool.

Names and Variables

Apostrophe separator

The $Package'var syntax is gone. Use $Package::var instead. (Note, however, that identifiers may now contain an apostrophe or hyphen if followed by a character matching <.alpha>)


Perl 6 includes a system of sigils to mark the fundamental structural type of a variable:

$   scalar (object)
@   ordered array
%   unordered hash (associative array)
&   code/rule/token/regex
::  package/module/class/role/subset/enum/type/grammar

Within a declaration, the & sigil also declares the visibility of the subroutine name without the sigil within the scope of the declaration:

my &func := sub { say "Hi" };
func;   # calls &func

Within a signature or other declaration, the :: pseudo-sigil followed by an identifier marks a type variable that also declares the visibility of a package/type name without the sigil within the scope of the declaration. The first such declaration within a scope is assumed to be an unbound type, and takes the actual type of its associated argument. With subsequent declarations in the same scope the use of the pseudo-sigil is optional, since the bare type name is also declared.

A declaration nested within must not use the sigil if it wishes to refer to the same type, since the inner declaration would rebind the type. (Note that the signature of a pointy block counts as part of the inner block, not the outer block.)

Sigils indicate interface

Sigils indicate overall interface, not the exact type of the bound object. Different sigils imply different minimal abilities.

$x may be bound to any object, including any object that can be bound to any other sigil. Such a scalar variable is always treated as a singular item in any kind of list context, regardless of whether the object is essentially composite or unitary. It will not automatically dereference to its contents unless placed explicitly in some kind of dereferencing context. In particular, when interpolating into list context, $x never expands its object to anything other than the object itself as a single item, even if the object is a container object containing multiple items.

@x may be bound to an object of the Array class, but it may also be bound to any object that does the Positional role, such as a Range, Buf, Parcel, or Capture. The Positional role implies the ability to support postcircumfix:<[ ]>.

Likewise, %x may be bound to any object that does the Associative role, such as Pair, PairSet, Set, Bag, KeyHash, or Capture. The Associative role implies the ability to support postcircumfix:<{ }>.

&x may be bound to any object that does the Callable role, such as any Block or Routine. The Callable role implies the ability to support postcircumfix:<( )>.

In any case, the minimal container role implied by the sigil is checked at binding time at the latest, and may fail earlier (such as at compile time) if a semantic error can be detected sooner. If you wish to bind an object that doesn't yet do the appropriate role, you must either stick with the generic $ sigil, or mix in the appropriate role before binding to a more specific sigil.

An object is allowed to support both Positional and Associative. An object that does not support Positional may not be bound directly to @x. However, any construct such as %x that can interpolate the contents of such an object into list context can automatically construct a list value that may then be bound to an array variable. Subscripting such a list does not imply subscripting back into the original object.

No intervening whitespace

Unlike in Perl 5, you may no longer put whitespace between a sigil and its following name or construct.


Ordinary sigils indicate normally scoped variables, either lexical or package scoped. Oddly scoped variables include a secondary sigil (a twigil) that indicates what kind of strange scoping the variable is subject to:

$foo        ordinary scoping
$.foo       object attribute public accessor
$^foo       self-declared formal positional parameter
$:foo       self-declared formal named parameter
$*foo       dynamically overridable global variable
$?foo       compiler hint variable
$=foo       Pod variable
$<foo>      match variable, short for $/{'foo'}
$!foo       object attribute private storage
$~foo       the foo sublanguage seen by the parser at this lexical spot

Most variables with twigils are implicitly declared or assumed to be declared in some other scope, and don't need a "my" or "our". Attribute variables are declared with has, though.

Scope declarators

Normal names and variables are declared using a scope declarator:

my          # introduces lexically scoped names
our         # introduces package-scoped names
has         # introduces attribute names
anon        # introduces names that are private to the construct
state       # introduces lexically scoped but persistent names
augment     # adds definitions to an existing name
supersede   # replaces definitions of an existing name

Names may also be declared in the signature of a function. These are equivalent to a my declaration inside the block of the function, except that such parameters default to readonly.

The anon declarator allows a declaration to provide a name that can be used in error messages, but that isn't put into any external symbol table:

my $secret = anon sub marine () {...}
$secret(42)  # too many arguments to sub marine

However, the name is introduced into the scope of the declaration itself, so it may be used to call itself recursively:

my $secret =
    anon sub tract($n) { say $n; tract($n-1) if $n }

$secret(5); # 5 4 3 2 1 0

Invariant sigils

Sigils are now invariant. $ always means a scalar variable, @ an array variable, and % a hash variable, even when subscripting. In item context, variables such as @array and %hash simply return themselves as Array and Hash objects. (Item context was formerly known as scalar context, but we now reserve the "scalar" notion for talking about variables rather than contexts, much as arrays are disassociated from list context.)

List stringification

In string contexts, lists and list-like objects automatically stringify to appropriate (white-space separated) string values. In numeric contexts, the number of elements in the container is returned. In boolean contexts, a true value is returned if and only if there are any elements in the container.

The .perl method

To get a Perlish representation of any object, use the .perl method. Like the Data::Dumper module in Perl 5, the .perl method will put quotes around strings, square brackets around list values, curlies around hash values, constructors around objects, etc., so that Perl can evaluate the result back to the same object. The .perl method will return a representation of the object on the assumption that, if the code is reparsed at some point, it will be used to regenerate the object as a scalar in item context. If you wish to interpolate the regenerated object in a list context, it may be necessary to use <prefix:<| >> to force interpolation.

Note that .perl has a very specific definition, and it is expected that some modules will rely on the ability to roundtrip values with eval. As such, overriding .perl with a different format (globally using MONKEY_TYPING, or for specific classes unless special care is taken to maintain parsability) is unwise. Code which does not depend on .perl's definition should use .gist instead to allow more control.

The .gist method

.gist, by contrast with .perl, returns a flexible form of an object intended for human interpretation. Specific user classes are encouraged to override .gist to do something appropriate, and it is completely acceptable to monkey patch .gist methods while doing debugging, without risk of breaking any used module. .gist, like any method, will accept and ignore unrecognized named arguments; implementations of .gist are encouraged to standardize on a set of flags.

[Some conjectural suggestions:

:oneline        Do not indent or linebreak output
:width($d)      Wrap output at $d chars
:charset($obj)  Represent unrecognized characters as escapes
:ascii          Short for some instantiation of :charset

Conjecturally, .gist on system-defined classes could redispatch to &*PRETTYPRINTER or some similar system, allowing for a more disciplined way to change pretty formats.

It may also be desirable to use a richer format for intermediate strings than simple Str, for instance using an object format that can handle intelligent line breaking. However, that's probably overkill.]

The .fmt method

To get a formatted representation of any scalar value, use the .fmt('%03d') method to do an implicit sprintf on the value.

To format an array value separated by commas, supply a second argument: .fmt('%03d', ', '). To format a hash value or list of pairs, include formats for both key and value in the first string: .fmt('%s: %s', "\n").


Subscripts now consistently dereference the container produced by whatever was to their left. Whitespace is not allowed between a variable name and its subscript. However, there are two ways to stretch the construct out visually. Since a subscript is a kind of postfix operator, there is a corresponding dot form of each subscript (@foo.[1] and %bar.{'a'}) that makes the dereference a little more explicit. Constant string subscripts may be placed in angles, so %bar.{'a'} may also be written as %bar<a> or %bar.<a>. Additionally, you may insert extra whitespace using the unspace.

Slicing is specified by the nature of the subscript, not by the sigil.

Subscripts have list context

The context in which a subscript is evaluated is no longer controlled by the sigil either. Subscripts are always evaluated in list context. (More specifically, they are evaluated in a variant of list context known as lol context (List of List), which preserves dimensional information so that you can do multi-dimensional slices using semicolons. However, each slice dimension evaluates its sublist in normal list context, so functions called as part of a subscript don't see a lol context. See S09 for more on slicing.)

If you need to force inner context to item (scalar), we now have convenient single-character context specifiers such as + for numbers and ~ for strings:

$x        =  g();       # item context for g()
@x[f()]   =  g();       # list context for f() and g()
@x[f()]   = +g();       # list context for f(), numeric item context for g()
@x[+f()]  =  g();       # numeric item context for f(), list context for g()

@x[f()]   =  @y[g()];   # list context for f() and g()
@x[f()]   = +@y[g()];   # list context for f() and g()
@x[+f()]  =  @y[g()];   # numeric item context for f(), list context for g()
@x[f()]   =  @y[+g()];  # list context for f(), numeric item context for g()

%x{~f()}  =  %y{g()};   # string item context for f(), list context for g()
%x{f()}   =  %y{~g()};  # list context for f(), string item context for g()

Sigils used as functions with parenthesis also force context, so these also work:

@x[$(g())]         # item context for g()
%x{$(g())}         # item context for g()

But note that these don't do the same thing:

@x[$g()]           # call function in $g
%x{$g()}           # call function in $g

Array and Hash variables can be evaluated in item context by prefixing them with a single dollar sign:

$@a               # same as  item @a
$%h               # same as  item %h

List assignment and binding

There is a need to distinguish list assignment from list binding. List assignment works much like it does in Perl 5, copying the values. There's a new := binding operator that lets you bind names to Array and Hash objects without copying, in the same way as subroutine arguments are bound to formal parameters. See S06 for more about binding.


A list of one or more comma-separated objects may be grouped together by parentheses into a "parenthesis cell", or Parcel. This kind of list should not be confused with the flattening list context. Instead, this is a raw syntactic list that has not yet committed to flattening; no interpretation is made of the list inside without knowing what context it will be evaluated in. For example, when you say:


the result is a Parcel object containing three Int objects and a Pair object, that is, four positional objects. When, however, you say something like:


the syntactic Parcel is translated (at compile time, in this case) into a Capture object with three positionals and one named argument in preparation for binding. More generally, a parcel is transmuted to a capture any time it is bound to a complete signature.

You may force immediate conversion to a Capture object by prefixing the parcel composer with a backslash:

$args = \(1,2,3,:mice<blind>)

Unlike Capture objects, Parcel objects are ephemeral, insofar as the user almost never sees one as a real standalone object, since binding or assignment always turns a parcel into something else. A parcel may generally only be preserved as a part of an outer parcel or capture object.

Individual arguments in a parcel or capture composer are parsed as ordinary expressions, and any functions mentioned are called immediately, with each function's results placed as an argument (often a subparcel, if the function returns multiple values) within the outer parcel (or capture). Whether any given argument is flattened will depend on its eventual binding, and in general cannot be known at parcel/capture composition time.

We use "argument" here to mean anything that would be taken as a single argument if bound to a positional or named parameter:

rhyme(1,2,3,:mice<blind>)     # rhyme has 4 arguments
rhyme((1,2),3,:mice<blind>)   # rhyme has 3 arguments
rhyme((1,2,3),:mice<blind>)   # rhyme has 2 arguments
rhyme((1,2),(3,:mice<blind>)) # rhyme has 2 arguments
rhyme((1,2,3,:mice<blind>))   # rhyme has 1 argument

In these examples, the first argument to the function is a parcel in all but the first case, where it is simply the literal integer 1. An argument is either of:

  • A parcel that groups together a sublist, or

  • Any other object that can function as a single argument.

Looking at it the other way, all arguments that don't actually need to be wrapped up in a parcel are considered degenerate parcels in their own right when it comes to binding. Note that a capture is not considered a kind of parcel, so does not flatten in flat context.

Parcels, parameters, and Captures

When a Parcel is bound to a parameter, the behavior depends on whether the parameter is "flattening" or "argumentative". Positional parameters and slice parameters are argumentative and call .getarg on the internal iterator and just return the next syntactic argument (parcel or other object) without flattening. (A slice differs from an ordinary positional parameter in being "slurpy", that is, it is intended to fetch multiple values from the variadic region of the surrounding capture. Slurpy contexts come in both flattening (* parameters) and slicing (** parameters) forms.)

The fact that a parameter is being bound implies that there is an outer capture being bound to a signature. The capture's iterator provides a .get and a .getarg method to tell the iterator what context to bind in. For positional/slice parameters, the .getarg method returns the entire next argument from the iterator. It returns other objects unchanged. In contrast, flat parameters call .get on the capture's iterator, which flattens any subparcels before pulling out the next item. In either case, no bare parcel object is seen as a normal bound argument. (There is a way to bind the underlying parcel using backslash, however. This is how internal routines can deal with parcels as real objects.)

In contrast to parameter binding, if a Parcel is bound to an entire signature (typically as part of a function or method call), it will be transformed first into a capture object, which is much like a parcel but has its arguments divvied up into positional and named subsets for faster binding. (Usually this transformation happens at compile time.) If the first positional is followed by a colon instead of a comma, it is marked as the invocant in case it finds itself in a context that cares. It's illegal to use the colon in place of the comma anywhere except after the first argument.

Explicit binding to an individual variable is considered a form of signature binding, which is to say a declarator puts implicit signature parens around the unparenthesized form:

my (*@x) := foo(); # signature binding
my *@x := foo();   # same thing

The parens are, of course, required if there is more than one parameter.

Capture objects are immutable in the abstract, but evaluate their arguments lazily. Before everything inside a Capture is fully evaluated (which happens at compile time when all the arguments are constants), the eventual value may well be unknown. All we know is that we have the promise to make the bits of it immutable as they become known.

Capture objects may contain multiple unresolved iterators such as feeds or parcels or lists of parcels. How these are resolved depends on what they are eventually bound to. Some bindings are sensitive to multiple dimensions while others are not. Binding to a list of lists is often known as "slicing", because it's commonly used to index "slices" of a potentially multi-dimensional array.

You may retrieve parts from a Capture object with a prefix sigil operator:

$args = \3;     # same as "$args = \(3)"
@$args;         # same as "Array($args)"
%$args;         # same as "Hash($args)"

When cast into an array, you can access all the positional arguments; into a hash, all named arguments.

All prefix sigil operators accept one positional argument, evaluated in item context as a rvalue. They can interpolate in strings if called with parentheses. The special syntax form $() translates into $( $.ast // Str($/) ) to operate on the current match object; similarly @() and %() can extract positional and named submatches.

Parcel and Capture objects fill the ecological niche of references in Perl 6. You can think of them as "fat" references, that is, references that can capture not only the current identity of a single object, but also the relative identities of several related objects. Conversely, you can think of Perl 5 references as a degenerate form of Capture when you want to refer only to a single item.

There is a special Parcel value named Nil. It means "there is no value here". It is the undefined equivalent of the empty () list, except that the latter is defined and means "there are 0 arguments here". The Nil value returns itself if you iterate it or try to get a positional value from it via subscripting, but interpolates as a null list into flat context. In either case, a warning is issued.

Since method calls are performed directly on any object, Nil can respond to certain method calls. Nil.defined returns False (whereas ().defined returns True). also returns False. Nil.ACCEPTS matches only a Nil value. Nil.perl and Nil.gist return 'Nil'. Nil.Stringy and Nil.Str fail with a resumable warning that returns a value of '' on resumption. Nil.Numeric likewise fails with resumable warning that returns 0 on resumption. Any undefined method call on Nil returns Nil, so that Nil propagates down method call chains.

Assigning Nil to any scalar container causes the container to throw out any contents and restore itself to an uninitialized state (after which it will contain an object appropriate to the declared default of the container, where Any is the default default). Binding of Nil with := simply puts Nil in the container. However, binding Nil to a parameter (::= semantics) works more like assignment; passing Nil to a parameter with a default causes that parameter to be set to its default value rather than an undefined value, as if the argument had not been supplied.

Assigning Nil to any entire composite container (such as an Array or Hash) empties the container, resetting it back to an uninitialized state. The container object itself then becomes undefined. (Asssignment of () leaves it defined.)

The sink statement prefix will eagerly evaluate any block or statement, throw away the results, and instead return the empty Parcel value, (). This can be useful to peg some behavior to an empty list while still returning an empty list:

# Check that incoming argument list isn't null
@inclist = map { $_ + 1 }, @list || sink warn 'Nil input!';

@inclist = do for @list || sink { warn 'Nil input!'; $warnings++; } {
    $_ + 1;

# Check that outgoing result list isn't null
@inclist = do map { $_ + 1 }, @list or sink warn 'Nil result!';

@inclist = do for @list {
    $_ + 1;
} or sink { warn 'Nil result'; $warnings++; }

Given sink, there's no need for an "else" clause on Perl 6's loops, and the sink construct works in any list, not just for loops.


A CaptureCursor object is a view into another capture with an associated start position. Such a cursor is essentially a pattern-matching state. Capture cursors are used for operations like grep and map and for loops that need to apply a short signature multiple times to a longer list of values supplied by the base capture. When we say "capture" we sometimes mean either Capture or CaptureCursor. CaptureCursors are also immutable. When pattern matching a signature against a cursor, you get a new cursor back which tells you the new position in the base capture.

Signature objects

A signature object (Signature) may be created with colon-prefixed parens:

my ::MySig ::= :(Int, Num, Complex, Status)

Expressions inside the signature are parsed as parameter declarations rather than ordinary expressions. See S06 for more details on the syntax for parameters.

Declarators generally make the colon optional:

my ($a,$b,$c);      # parsed as signature

Signature objects bound to type variables (as in the example above) may be used within other signatures to apply additional type constraints. When applied to a capture argument, the signature allows you to take the types of the capture's arguments from MySig, but declare the (untyped) variable names yourself via an additional signature in parentheses:

sub foo (Num  $num, MySig $a ($i,$j,$k,$mousestatus)) {...}
foo($mynum, \(1, 2.7182818, 1.0i, statmouse());

Ampersand and invocation

Unlike in Perl 5, the notation &foo merely stands for the foo function as a Routine object without calling it. You may call any Code object by dereferencing it with parens (which may, of course, contain arguments):

&foo($arg1, $arg2);

Whitespace is not allowed before the parens because it is parsed as a postfix. As with any postfix, there is also a corresponding .() operator, and you may use the "unspace" form to insert optional whitespace and comments between the backslash and either of the postfix forms:

&foo\   ($arg1, $arg2);
&foo\   .($arg1, $arg2);
    embedded comment
].($arg1, $arg2);

Note however that the parentheses around arguments in the "normal" named forms of function and method calls are not postfix operators, so do not allow the .() form, because the dot is indicative of an actual dereferencing operation, which the named forms aren't doing. You may, however, use "unspace" to install extra space before the parens in the forms:

foo()       # okay
foo\ ()     # okay
foo.()      # means foo().()

.foo()      # okay
.foo\ ()    # okay
.foo.()     # means .foo().()

$.foo()     # okay
$.foo\ ()   # okay
$.foo.()    # means $.foo().()

If you do use the dotty form on these special forms, it will assume you wanted to call the named form without arguments, and then dereference the result of that.

Specifying a dispatch candidate

With multiple dispatch, &foo is actually the name of a dispatch routine (instantiated from a proto) controlling a set of candidate functions (which you can use as if it were an ordinary function, because a dispatch is really an only function with pretentions to management of a dispatcher). However, in that case &foo by itself is not sufficient to uniquely name a specific function. To do that, the type may be refined by using a signature literal as a postfix operator:


Use of a signature that does not unambiguously select a single multi results in failure.

It still just returns a Routine object. A call may also be partially applied (primed) by using the .assuming method:


Multidimensional slices and parcels

Slicing syntax is covered in S09. A multidimensional slice will be done with semicolons between individual slice sublists. The semicolons imply one extra level of tree-ness, where the top list is of type LoL and sublists are Listss (or non-iterable items that can function as single-item parcels). So when you say

@matrix[1..*; 0]

really means

@matrix[LoL( (1..*), 0 )]

Each such slice sub-parcel is evaluated lazily.

Subscript adverbs

To make a slice subscript return something other than values, append an appropriate adverb to the subscript.

@array = <A B>;
@array[0,1,2];      # returns 'A', 'B', Nil
@array[0,1,2] :p;   # returns 0 => 'A', 1 => 'B'
@array[0,1,2] :kv;  # returns 0, 'A', 1, 'B'
@array[0,1,2] :k;   # returns 0, 1
@array[0,1,2] :v;   # returns 'A', 'B'

%hash = (:a<A>, :b<B>);
%hash<a b c>;       # returns 'A', 'B', Nil
%hash<a b c> :p;    # returns a => 'A', b => 'B'
%hash<a b c> :kv;   # returns 'a', 'A', 'b', 'B'
%hash<a b c> :k;    # returns 'a', 'b'
%hash<a b c> :v;    # returns 'A', 'B'

These adverbial forms all weed out non-existing entries.


my ($a,$b,$c) = %hash<a b c> :delete;

deletes the entries "en passant" while returning them. (Of course, any of these forms also work in the degenerate case of a slice containing a single index.) Note that these forms work by virtue of the fact that the subscript is the topmost previous operator. You may have to parenthesize or force list context if some other operator that is tighter than comma would appear to be topmost:

1 + (%hash{$x} :delete);
$x = (%hash{$x} :delete);
($x) = %hash{$x} :delete;

(The situation does not often arise for the slice modifiers above because they are usually used in list context, which operates at comma precedence.)

You may also perform an existence test, either on a single item or a junction of items:

if %hash<foo> :exists {...}
if %hash{any <a b c>} :exists {...}
if %hash{all <a b c>} :exists {...}
if %hash{one <a b c>} :exists {...}
if %hash{none <a b c>} :exists {...}

Using the :exists adverb together with a list slice results in an error -- preferably at compile time -- because it could be argued both ways whether :exists on a bare list would have any or all semantics.

Numeric and boolean context of hashes

In numeric context (i.e. when cast into Int or Num), a Hash object becomes the number of pairs contained in the hash. In a boolean context, a Hash object is true if there are any pairs in the hash.

List sorting

Sorting a list of pairs should sort on their keys by default, then on their values. Sorting a list of lists should sort on the first elements, then the second elements, etc. For more on sort see S29.

Special variables

Many of the special variables of Perl 5 are going away. Those that apply to some object such as a filehandle will instead be attributes of the appropriate object. Those that are truly global will have global alphabetic names, such as $*PID or @*ARGS.

Any remaining special variables will be lexically scoped. This includes $_ and @_, as well as the new $/, which is the return value of the last regex match. $0, $1, $2, etc., are aliases into the $/ object.

Array end index

The $#foo notation is dead. Use @foo.end or @foo[*-1] instead. (Or @foo.shape[$dimension] for multidimensional arrays.)


An identifier is composed of an alphabetic character followed by any sequence of alphanumeric characters. The definitions of alphabetic and numeric include appropriate Unicode characters. Underscore is always considered alphabetic. An identifier may also contain isolated apostrophes or hyphens provided the next character is alphabetic.

A name is anything that is a legal part of a variable name (not counting the sigil). This includes

$foo                # simple identifiers
$Foo::Bar::baz      # compound identifiers separated by ::
$Foo::($bar)::baz   # compound identifiers that perform interpolations
$42                 # numeric names
$!                  # certain punctuational variables

When not used as a sigil, the semantic function of :: within a name is to force the preceding portion of the name to be considered a package through which the subsequent portion of the name is to be located. If the preceding portion is null, it means the package is unspecified and must be searched for according to the nature of what follows. Generally this means that an initial :: following the main sigil is a no-op on names that are known at compile time, though ::() can also be used to introduce an interpolation (see below). Also, in the absence of another sigil, :: can serve as its own sigil indicating intentional use of a not-yet-declared package name.

Unlike in Perl 5, if a sigil is followed by comma, semicolon, a colon not followed by an identifier, or any kind of bracket or whitespace (including Unicode brackets and whitespace), it will be taken to be a sigil without a name rather than a punctuational variable. This allows you to use sigils as coercion operators:

print $( foo() )    # foo called in item context
print %( foo() )   # foo called in hash context

In declarative constructs bare sigils may be used as placeholders for anonymous variables:

my ($a, $, $c) = 1..3;
print unless (state $)++;

Outside of declarative constructs you may use * for a placeholder:

($a, *, $c) = 1..3;

Attempts to say something like:

($a, $, $c) = 1..3;

will result in the message, "Anonymous variable requires declarator".

Package-qualified names

Ordinary package-qualified names look like they do in Perl 5:

$Foo::Bar::baz      # the $baz variable in package Foo::Bar

Sometimes it's clearer to keep the sigil with the variable name, so an alternate way to write this is:


This is resolved at compile time because the variable name is a constant.


The following pseudo-package names are reserved at the front of a name:

MY          # Symbols in the current lexical scope (aka $?SCOPE)
OUR         # Symbols in the current package (aka $?PACKAGE)
CORE        # Outermost lexical scope, definition of standard Perl
GLOBAL      # Interpreter-wide package symbols, really UNIT::GLOBAL
PROCESS     # Process-related globals (superglobals)
COMPILING   # Lexical symbols in the scope being compiled
DYNAMIC     # Contextual symbols in my or any caller's lexical scope

The following relative names are also reserved but may be used anywhere in a name:

CALLER      # Contextual symbols in the immediate caller's lexical scope
OUTER       # Symbols in the next outer lexical scope
UNIT        # Symbols in the outermost lexical scope of compilation unit
SETTING     # Lexical symbols in the unit's DSL (usually CORE)
PARENT      # Symbols in this package's parent package (or lexical scope)

Other all-caps names are semi-reserved. We may add more of them in the future, so you can protect yourself from future collisions by using mixed case on your top-level packages. (We promise not to break any existing top-level CPAN package, of course. Except maybe ACME, and then only for coyotes.)

The file's scope is known as UNIT, but there are one or more lexical scopes outside of that corresponding to the linguistic setting (often known as the prelude in other cultures). Hence, the SETTING scope is equivalent to UNIT::OUTER. For a standard Perl program SETTING is the same as CORE, but various startup options (such as -n or -p) can put you into a domain specific language, in which case CORE remains the scope of the standard language, while SETTING represents the scope defining the DSL that functions as the setting of the current file. See also the -L/--language switch described in S19-commandline. If a setting wishes to gain control of the main execution, it merely needs to declare a MAIN routine as documented in S06. In this case the ordinary execution of the user's code is suppressed; instead, execution of the user's code is entirely delegated to the setting's MAIN routine, which calls back to the user's lexically embedded code with {YOU_ARE_HERE}.

The {YOU_ARE_HERE} functions within the setting as a proxy for the user's UNIT block, so -n and -p may be implemented in a setting with:

for $*ARGFILES.lines {YOU_ARE_HERE}                 # -n
map *.say, do for $*ARGFILES.lines {YOU_ARE_HERE}   # -p


map {YOU_ARE_HERE}, $*ARGFILES.lines;               # -n
map *.say, map {YOU_ARE_HERE}, $*ARGFILES.lines;    # -p

and the user may use loop control phasers as if they were directly in the loop block. Any OUTER in the user's code refers to the block outside of {YOU_ARE_HERE}. If used as a standalone statement, {YOU_ARE_HERE} runs as if it were a bare block.

Note that, since the UNIT of an eval is the eval string itself, the SETTING of an eval is the language in effect at the point of the eval, not the language in effect at the top of the file. (You may, however, use OUTER::SETTING to get the setting of the code that is executing the eval.) In more traditional terms, the normal program is functioning as the "prelude" of the eval.

So the outermost lexical scopes nest like this, traversed via OUTER:

CORE <= SETTING < UNIT < (your_block_here)

The outermost package scopes nest like this, traversed via PARENT:

GLOBAL <  (your_package_here)

You main program starts up in the GLOBAL package and the UNIT lexical scope. Whenever anything is declared with "our" semantics, it inserts a name into both the current package and the current lexical scope. (And "my" semantics only insert into the current lexical scope.) Note that the standard setting, CORE, is a lexical scope, not a package; the various items that are defined within (or imported into) CORE are *not* in GLOBAL, which is pretty much empty when your program starts compiling, and mostly only contains things you either put there yourself, or some other module put there because you used that module. In general things defined within (or imported into) CORE should only be declared or imported with "my" semantics. All Perl code can see CORE anyway as the outermost lexical scope, so there's no need to also put such things into GLOBAL.

The GLOBAL package itself is accessible via UNIT::GLOBAL. The PROCESS package is accessible via UNIT::PROCESS. The PROCESS package is not the parent of GLOBAL. However, searching up the dynamic stack for dynamic variables will look in all nested dynamic scopes (mapped automatically to each call's lexical scope, not package scope) out to the main dynamic scope; once all the dynamic scopes are exhausted, it also looks in the GLOBAL package and then in the PROCESS package, so $*OUT typically finds the process's standard output handle. Hence, PROCESS and GLOBAL serve as extra outer dynamic scopes, much like CORE and SETTING function as extra outer lexical scopes.

Extra SETTING scopes keep their identity and their nesting within CORE, so you may have to go to OUTER several times from UNIT before you get to CORE. Normally, however, there is only the core setting, in which case UNIT::OUTER ends up meaning the same as SETTING which is the same as CORE.

Extra GLOBAL scopes are treated differently. Every compilation unit has its own associated UNIT::GLOBAL package. As the currently compiling compilation unit expresses the need for various other compilation units, the global names known to those other units must be merged into the new unit's UNIT::GLOBAL. (This includes the names in all the packages within the global package.) If two different units use the same global name, they must generally be taken to refer to the same item, but only if the type signatures can be meshed (and augmentation rules followed, in the case of package names). If two units provide package names with incompatible type signatures, the compilation of the unit fails. In other words, you may not use incompatible global types to provide a union type. However, if one or the other unit underspecifies the type in a compatible way, the underspecified type just takes on the extra type information as it learns it. (Presumably some combination of Liskov substitution, duck-typing, and run-time checking will prevent tragedy in the unit that was compiled with the underspecified type. Alternately, the compiler is allowed to recompile or re-examine the unit with the new type constraints to see if any issues are certain to arise at run time, in which case the compiler is free to complain.)

Any dynamic variable declared with our in the user's main program (specifically, the part compiled with GLOBAL as the current package) is accessible (by virtue of being in GLOBAL) as a dynamic variable even if not directly in the dynamic call chain. Note that dynamic vars do *not* look in CORE for anything. (They might look in SETTING if you're running under a setting distinct from CORE, if that setting defines a dynamic scope outside your main program, such as for the -n or -p switch.) Context variables declared with our in the GLOBAL or PROCESS packages do not need to use the * twigil, since the twigil is stripped before searching those packages. Hence, your environment variables are effectively declared without the sigil:

augment package GLOBAL { our %ENV; }

Interpolating into names

You may interpolate a string into a package or variable name using ::($expr) where you'd ordinarily put a package or variable name. The string is allowed to contain additional instances of ::, which will be interpreted as package nesting. You may only interpolate entire names, since the construct starts with ::, and either ends immediately or is continued with another :: outside the parens. Most symbolic references are done with this notation:

$foo = "Bar";
$foobar = "Foo::Bar";
$::($foo)           # lexically-scoped $Bar
$::("MY::$foo")     # lexically-scoped $Bar
$::("OUR::$foo")    # package-scoped $Bar
$::("GLOBAL::$foo") # global $Bar
$::("PROCESS::$foo")# process $Bar
$::("PARENT::$foo") # current package's parent's $Bar
$::($foobar)        # $Foo::Bar
$::($foobar)::baz   # $Foo::Bar::baz
$::($foo)::Bar::baz # $Bar::Bar::baz
$::($foobar)baz     # ILLEGAL at compile time (no operator baz)

Note that unlike in Perl 5, initial :: doesn't imply global. Here as part of the interpolation syntax it doesn't even imply package. After the interpolation of the ::() component, the indirect name is looked up exactly as if it had been there in the original source code, with priority given first to leading pseudo-package names, then to names in the lexical scope (searching scopes outwards, ending at CORE). The current package is searched last.

Use the MY pseudopackage to limit the lookup to the current lexical scope, and OUR to limit the scopes to the current package scope.

Strict lookup

When "strict" is in effect (which is the default except for one-liners), non-qualified variables (such as $x and @y) are only looked up from lexical scopes, but never from package scopes.

To bind package variables into a lexical scope, simply say our ($x, @y). To bind global variables into a lexical scope, predeclare them with use:


Or just refer to them as $*IN and $*OUT.

Direct lookup

To do direct lookup in a package's symbol table without scanning, treat the package name as a hash:

Foo::Bar::{'&baz'}  # same as &Foo::Bar::baz
PROCESS::<$IN>      # Same as $*IN
Foo::<::Bar><::Baz> # same as Foo::Bar::Baz

The :: before the subscript is required here, because the Foo::Bar{...} syntax is reserved for attaching a "WHENCE" initialization closure to an autovivifiable type object. (see S12).

Unlike ::() symbolic references, this does not parse the argument for ::, nor does it initiate a namespace scan from that initial point. In addition, for constant subscripts, it is guaranteed to resolve the symbol at compile time.

The null pseudo-package is reserved to mean the same search list as an ordinary name search. That is, the following are all identical in meaning:


That is, each of them scans lexical scopes outward, and then the current package scope (though the package scope is then disallowed when "strict" is in effect).

As a result of these rules, you can write any arbitrary variable name as either of:


You can also use the ::<> form as long as there are no spaces in the name.

Symbol tables

The current lexical symbol table is now accessible through the pseudo-package MY. The current package symbol table is visible as pseudo-package OUR. The OUTER name refers to the MY symbol table immediately surrounding the current MY, and OUTER::OUTER is the one surrounding that one.

our $foo = 41;
say $::foo;         # prints 41, :: is no-op
    my $foo = 42;
    say MY::<$foo>;         # prints "42"
    say $MY::foo;           # same thing
    say $::foo;             # same thing, :: is no-op here

    say OUR::<$foo>;        # prints "41"
    say $OUR::foo;          # same thing

    say OUTER::<$foo>;      # prints "41" (our $foo is also lexical)
    say $OUTER::foo;        # same thing

You may not use any lexically scoped symbol table, either by name or by reference, to add symbols to a lexical scope that is done compiling. (We reserve the right to relax this if it turns out to be useful though.)

Dynamic lookup

The CALLER package refers to the lexical scope of the (dynamically scoped) caller. The caller's lexical scope is allowed to hide any user-defined variable from you. In fact, that's the default, and a lexical variable must have the trait "is dynamic" to be visible via CALLER. ($_, $! and $/ are always dynamic, as are any variables whose declared names contain a * twigil.) If the variable is not visible in the caller, it returns failure. Variables whose names are visible at the point of the call but that come from outside that lexical scope are controlled by the scope in which they were originally declared as dynamic. Hence the visibility of CALLER::<$*foo> is determined where $*foo is actually declared, not by the caller's scope (unless that's where it happens to be declared). Likewise CALLER::CALLER::<$x> depends only on the declaration of $x visible in your caller's caller.

User-defined dynamic variables should generally be initialized with ::= unless it is necessary for variable to be modified. (Marking dynamic variables as readonly is very helpful in terms of sharing the same value among competing threads, since a readonly variable need not be locked.)


The DYNAMIC pseudo-package is just like CALLER except that it starts in the current dynamic scope and from there scans outward through all dynamic scopes (frames) until it finds a dynamic variable of that name in that dynamic frame's associated lexical pad. (This search is implied for variables with the * twigil; hence $*FOO is equivalent to DYNAMIC::<$*FOO>.) If, after scanning outward through all those dynamic scopes, there is no variable of that name in any immediately associated lexical pad, it strips the * twigil out of the name and looks in the GLOBAL package followed by the PROCESS package. If the value is not found, it returns failure.

Unlike CALLER, DYNAMIC will see a dynamic variable that is declared in the current scope, since it starts search 0 scopes up the stack rather than 1. You may, however, use CALLER::<$*foo> to bypass a dynamic definition of $*foo in your current scope, such as to initialize it with the outer dynamic value:

my $*foo ::= CALLER::<$*foo>;

The temp declarator may be used (without an initializer) on a dynamic variable to perform a similar operation:

temp $*foo;

The main difference is that by default it initializes the new $*foo with its current value, rather than the caller's value. Also, it is allowed only on read/write dynamic variables, since the only reason to make a copy of the outer value would be because you'd want to override it later and then forget the changes at the end of the current dynamic scope.

You may also use OUTER::<$*foo> to mean you want to start the search in your outer lexical scope, but this will succeed only if that outer lexical scope also happens to be one of your current dynamic scopes. That is, the same search is done as with the bare $*foo, but any "hits" are ignored until we've got to the OUTER scope in our traversal.

Package lookup

There is no longer any special package hash such as %Foo::. Just subscript the package object itself as a hash object, the key of which is the variable name, including any sigil. The package object can be derived from a type name by use of the :: postfix:


(Directly subscripting the type with either square brackets or curlies is reserved for various generic type-theoretic operations. In most other matters type names and package names are interchangeable.)

Typeglobs are gone. Use binding (:= or ::=) to do aliasing. Individual variable objects are still accessible through the hash representing each symbol table, but you have to include the sigil in the variable name now: MyPackage::{'$foo'} or the equivalent MyPackage::<$foo>.


Interpreter globals live in the GLOBAL package. The user's program starts in the GLOBAL package, so "our" declarations in the mainline code go into that package by default. Process-wide variables live in the PROCESS package. Most predefined globals such as $*UID and $*PID are actually process globals.

The PROCESS package

There is only ever a single PROCESS package. For an ordinary Perl program running by itself, there is only one GLOBAL package as well. However, in certain situations (such as shared hosting under a webserver), the actual process may contain multiple virtual processes or interpreters, each running its own "main" code. In this case, the GLOBAL namespace holds variables that properly belong to the individual virtual process, while the PROCESS namespace holds variables that properly belong to the actual process as a whole. From the viewpoint of the program there is little difference as long as all global variables are accessed as if they were dynamic variables (by using the * twigil). The process as a whole may place restrictions on the mutability of process variables as seen by the individual subprocesses. Also, individual subprocesses may not create new process variables. If the process wishes to grant subprocesses the ability to communicate via the PROCESS namespace, it must supply a writeable dynamic variable to all the subprocesses granted that privilege.

Dynamic variable creation

It is illegal to assign or bind a dynamic variable that does not already exist. It will not be created in GLOBAL (or PROCESS) automatically, nor is it created in any lexical scope. Instead, you must assign directly using the package name to get that to work:

GLOBAL::<$mynewvar> = $val;

The magic input handle

The magic command-line input handle is $*ARGFILES. The arguments themselves come in @*ARGS. See also "Declaring a MAIN subroutine" in S06.

Magical access to documentation

The Pod documentation in a file is accessible from code in the same file via variables with a = secondary sigil. $=data is the accessor for your =data section(s), for instance. All Pod structures are available as a hierarchical data structure, through $=pod. As with *, the = may also be used as a package name: $=::data.

Magical lexically scoped values

Magical lexically scoped values live in variables with a ? secondary sigil. These are all values that are known to the compiler, and may in fact be dynamically scoped within the compiler itself, and only appear to be lexically scoped because dynamic scopes of the compiler resolve to lexical scopes of the program. All $? variables are considered constants, and may not be modified after being compiled in. The user is also allowed to define or (redefine) such constants:

constant $?TABSTOP = 4;     # assume heredoc tabs mean 4 spaces

(Note that the constant declarator always evaluates its initialization expression at compile time.)

$?FILE and $?LINE are your current file and line number, for instance. Instead of $?OUTER::FOO you probably want to write OUTER::<$?FOO>. Within code that is being run during the compile, such as BEGIN blocks, or macro bodies, or constant initializers, the compiler variables must be referred to as (for instance) COMPILING::<$?LINE> if the bare $?LINE would be taken to be the value during the compilation of the currently running code rather than the eventual code of the user's compilation unit. For instance, within a macro body $?LINE is the line within the macro body, but COMPILING::<$?LINE> is the line where the macro was invoked. See below for more about the COMPILING pseudo package.

Here are some possibilities:

$?FILE      Which file am I in?
$?LINE      Which line am I at?
&?ROUTINE   Which routine am I in?
&?BLOCK     Which block am I in?
%?LANG      What is the current set of interwoven languages?

The following return objects that contain all pertinent info:

$?KERNEL    Which kernel am I compiled for?
$?DISTRO    Which OS distribution am I compiling under
$?VM        Which virtual machine am I compiling under
$?XVM       Which virtual machine am I cross-compiling for
$?PERL      Which Perl am I compiled for?
$?SCOPE     Which lexical scope am I in?
$?PACKAGE   Which package am I in?
$?MODULE    Which module am I in?
$?CLASS     Which class am I in? (as variable)
$?ROLE      Which role am I in? (as variable)
$?GRAMMAR   Which grammar am I in?

It is relatively easy to smartmatch these constant objects against pairs to check various attributes such as name, version, or authority:

given $?VM {
    when :name<Parrot> :ver(v2) { ... }
    when :name<CLOS>            { ... }
    when :name<SpiderMonkey>    { ... }
    when :name<JVM> :ver(v6.*)  { ... }

Matches of constant pairs on constant objects may all be resolved at compile time, so dead code can be eliminated by the optimizer.

Note that some of these things have parallels in the * space at run time:

$*KERNEL    Which kernel I'm running under
$*DISTRO    Which OS distribution I'm running under
$*VM        Which VM I'm running under
$*PERL      Which Perl I'm running under

You should not assume that these will have the same value as their compile-time cousins.

The COMPILING pseudopackage

While $? variables are constant to the run time, the compiler has to have a way of changing these values at compile time without getting confused about its own $? variables (which were frozen in when the compile-time code was itself compiled). The compiler can talk about these compiler-dynamic values using the COMPILING pseudopackage.

References to COMPILING variables are automatically hoisted into the lexical scope currently being compiled. Setting or temporizing a COMPILING variable sets or temporizes the incipient $? variable in the surrounding lexical scope that is being compiled. If nothing in the context is being compiled, an exception is thrown.

$?FOO // say "undefined";   # probably says undefined
say $?FOO;                  # prints 42
    say $?FOO;              # prints 42
    BEGIN { temp COMPILING::<$?FOO> = 43 } # temporizes to *compiling* block
    say $?FOO;              # prints 43
    BEGIN { COMPILING::<$?FOO> = 44 }
    say $?FOO;              # prints 44
    BEGIN { say COMPILING::<$?FOO> }        # prints 44, but $?FOO probably undefined
say $?FOO;                  # prints 42 (left scope of temp above)
$?FOO = 45;                 # always an error
COMPILING::<$?FOO> = 45;    # an error unless we are compiling something

Note that CALLER::<$?FOO> might discover the same variable as COMPILING::<$?FOO>, but only if the compiling scope is the immediate caller. Likewise OUTER::<$?FOO> might or might not get you to the right place. In the abstract, COMPILING::<$?FOO> goes outwards dynamically until it finds a compiling scope, and so is guaranteed to find the "right" $?FOO. (In practice, the compiler hopefully keeps track of its current compiling scope anyway, so no scan is needed.)

Perceptive readers will note that this subsumes various "compiler hints" proposals. Crazy readers will wonder whether this means you could set an initial value for other lexicals in the compiling scope. The answer is yes. In fact, this mechanism is probably used by the exporter to bind names into the importer's namespace.

Switching parsers

The currently compiling Perl parser is switched by modifying one of the braided languages in COMPILING::<%?LANG>. Lexically scoped parser changes should temporize the modification. Changes from here to end-of-compilation unit can just assign or bind it. In general, most parser changes involve deriving a new grammar and then pointing one of the COMPILING::<%?LANG> entries at that new grammar. Alternately, the tables driving the current parser can be modified without derivation, but at least one level of anonymous derivation must intervene from the preceding Perl grammar, or you might be messing up someone else's grammar. Basically, the current set of grammars in %?LANG has to belong only to the current compiling scope. It may not be shared, at least not without explicit consent of all parties. No magical syntax at a distance. Consent of the governed, and all that.


Individual sublanguages ("slangs") may be referred to using the ~ twigil. The following are useful:

$~MAIN       the current main language (e.g. Perl statements)
$~Quote      the current root of quoting language
$~Quasi      the current root of quasiquoting language
$~Regex      the current root of regex language
$~Trans      the current root of transliteration language
$~P5Regex    the current root of the Perl 5 regex language

Hence, when you are defining a normal Perl macro, you're replacing $~MAIN with a derived language, but when you define a new regex backslash sequence, you're replacing $~Regex with a derived language. (There may or may not be a syntax in the main language to do this.) Note that such changes are automatically scoped to the lexical scope; as with real slang, the definitions are temporary and embedded in a larger language inherited from the surrounding culture.

Instead of defining macros directly you may also mix in one or more grammar rules by lexically scoped declaration of a new sublanguage:

augment slang Regex {  # derive from $~Regex and then modify $~Regex
    token backslash:std<\Y> { YY };

This tends to be more efficient since it only has to do one mixin at the end of the block. Note that the slang declaration has nothing to do with package Regex, but only with $~Regex. Sublanguages are in their own namespace (inside the current value of %?LANG, in fact). Hence augment is modifying one of the local strands of a braided language, not a package somewhere else.

You may also supersede a sublang entirely if, for example, you just want to disable that sublanguage in the current lexical scope:

supersede slang P5Regex {}
m:P5/./;             # kaboom

If you supersede MAIN then you're replacing the Perl parser entirely. This might be done by, say, the "use COBOL" declaration. :-)

Extended identifiers

It is often convenient to have names that contain arbitrary characters or other data structures. Typically these uses involve situations where a set of entities shares a common "short" name, but still needs for each of its elements to be identifiable individually. For example, you might use a module whose short name is ThatModule, but the complete long name of a module includes its version, naming authority, and perhaps even its source language. Similarly, sets of operators work together in various syntactic categories with names like prefix, infix, postfix, etc. The long names of these operators, however, often contain characters that are excluded from ordinary identifiers.

For all such uses, an identifier followed by a subscript-like adverbial form (see below) is considered an extended identifier:

infix:<+>    # the official name of the operator in $a + $b
infix:<*>    # the official name of the operator in $a * $b
infix:«<=»   # the official name of the operator in $a <= $b
prefix:<+>   # the official name of the operator in +$a
postfix:<--> # the official name of the operator in $a--

This name is to be thought of semantically, not syntactically. That is, the bracketing characters used do not count as part of the name; only the quoted data matters. These are all the same name:


Despite the appearance as a subscripting form, these names are resolved not at run time but at compile time. The pseudo-subscripts need not be simple scalars. These are extended with the same two-element list:

infix:<?? !!>

An identifier may be extended with multiple named identifier extensions, in which case the names matter but their order does not. These name the same module:

use ThatModule:auth<Somebody>:ver<>
use ThatModule:ver<>:auth<Somebody>

Adverbial syntax will be described more fully later.


Perl 6 has a rich set of literal forms, many of which can be used for textual input as well. For those forms simple enough to be allowed, the val() function treats such a string value as if it were a literal in the program. In some cases the val() function will be applied on your behalf, and in other cases you must do so explicitly. The rationale for this function is that there are many cases where the programmer or user is forced to use a string type to represent a value that is intended to become a numeric type internally. Committing pre-emptively to either a string type or a numeric type is likely to be wrongish, so Perl 6 instead provides the concept of allomorphic literals. How these work is described below in "Allomorphic value semantics".

When used as literals in a program, most of these forms produce an exact type, and are not subject to val() processing. The exceptions will be noted as we go.


A single underscore is allowed only between any two digits in a literal number, where the definition of digit depends on the radix. (A single underscore is also allowed between a radix prefix and a following digit, as explained in the next section.) Underscores are not allowed anywhere else in any numeric literal, including next to the radix point or exponentiator, or at the beginning or end.

Radix markers

Initial 0 no longer indicates octal numbers by itself. You must use an explicit radix marker for that. Pre-defined radix prefixes include:

0b          base 2, digits 0..1
0o          base 8, digits 0..7
0d          base 10, digits 0..9
0x          base 16, digits 0..9,a..f (case insensitive)

Each of these allows an optional underscore after the radix prefix but before the first digit. These all mean the same thing:


General radices

The general radix form of a number involves prefixing with the radix in adverbial form:

:10<42>             same as 0d42 or 42
:16<DEAD_BEEF>      same as 0xDEADBEEF
:8<177777>          same as 0o177777 (65535)
:2<1.1>             same as 0b1.1 (0d1.5)

Extra digits are assumed to be represented by a..z and A..Z, so you can go up to base 36. (Use A and B for base twelve, not T and E.) Alternately you can use a list of digits in decimal:

:60[12,34,56]       # 12 * 3600 + 34 * 60 + 56
:100[3,'.',14,16]   # pi

All numbers representing digits must be less than the radix, or an error will result (at compile time if constant-folding can catch it, or at run time otherwise).

Any radix may include a fractional part. A dot is never ambiguous because you have to tell it where the number ends:

:16<dead_beef.face> # fraction
:16<dead_beef>.face # method call


Only base 10 (in any form) allows an additional exponentiator starting with 'e' or 'E'. All other radixes must either rely on the constant folding properties of ordinary multiplication and exponentiation, or supply the equivalent two numbers as part of the string, which will be interpreted as they would outside the string, that is, as decimal numbers by default:

:16<dead_beef> * 16**8

It's true that only radixes that define e as a digit are ambiguous that way, but with any radix it's not clear whether the exponentiator should be 10 or the radix, and this makes it explicit:

0b1.1e10                    ILLEGAL, could be read as any of:

:2<1.1> * 2 ** 10           1536
:2<1.1> * 10 ** 10          15,000,000,000
:2<1.1> * :2<10> ** :2<10>  6

So we write those as

:2<1.1*2**10>               1536
:2<1.1*10**10>              15,000,000,000
:2«1.1*:2<10>**:2<10>»      6

The generic string-to-number converter will recognize all of these forms (including the * form, since constant folding is not available to the run time). Also allowed in strings are leading plus or minus, and maybe a trailing Units type for an implied scaling. Leading and trailing whitespace is ignored. Note also that leading 0 by itself never implies octal in Perl 6.

In all these cases, the type produced will be the narrowest of Int, Rat, or Num that can accurately represent the number. If no type can represent it exactly, it should be returned as either a Rat or a Num, whichever is more accurate. (Rat64 will tend to be more accurate for numbers of normal or large magnitude, while Num64 may be more accurate for numbers of very small magnitude, since the Rat's size mismatch of numerator and denominator will eventually cost more accuracy than the Num's exponent overhead. As a limiting case, a Rat64 cannot represent any number smaller than :10<1*2**-64>.)

A consequence of the preceding is that you cannot make a FatRat using colon notation. You must rely on constructors and constant folding:,2) ** 128, 2 ** 128)     # same thing

Conversion functions

Any of the adverbial forms may be used as a function:

:2($x)      # "bin2num"
:8($x)      # "oct2num"
:10($x)     # "dec2num"
:16($x)     # "hex2num"

Think of these as setting the default radix, not forcing it. Like Perl 5's old oct() function, any of these will recognize a number starting with a different radix marker and switch to the other radix. However, note that the :16() converter function will interpret leading 0b or 0d as hex digits, not radix switchers.

Use of the functional form on anything that is not a string will throw an exception explaining that the user has confused a number with the textual representation of a number. This is to catch errors such as a :8(777) that should have been :8<777>, or the attempt to use the function in reverse to produce a textual representation from a number.

Rational literals

Rational literals are indicated by separating two integer literals (in any radix) with a slash, and enclosing the whole in angles:

<1/2>       # one half literal Rat

Whitespace is not allowed on either side of the slash or it will be split under normal quote-words semantics:

< 1 / 2 >   # ('1', '/', '2')
< 1/2 >     # okay, same as <1/2>

Because of constant folding, you may often get away with leaving out the angles:

1/2         # 1 divided by 2

However, in that case you have to pay attention to precedence and associativity. The following does not cube 2/3:

2/3**3      # 2/(3**3), not (2/3)**3

Decimal fractions not using "e" notation are also treated as literal Rat values:

6.02e23.WHAT     # Num
1.23456.WHAT     # Rat
0.11 == 11/100   # True

Literals specified in angle brackets are always subject to val() processing, so <1/2> produces a value that is both a Rat and a Str. See "Allomorphic value semantics" below.

Complex literals

Complex literals are similarly indicated by writing an addition or subtraction of two real numbers (again, without spaces around the operators) inside angles:

< -3-1i >

As with rational literals, constant folding would produce the same complex number, but this form parses as a single term, ignoring surrounding precedence.

(Note that these are not actually special syntactic forms: both rational and complex literal forms fall out naturally from the semantic rules of qw quotes described below.)

Literals specified in angle brackets are always subject to val() processing, so <1+2i> produces a value that is both a Complex and a Str. See "Allomorphic value semantics" below.

Blob literals

Blob literals look similar to integer literals with radix markers, but use curlies instead of angles:

:2{0010_1110_1000_10}   a blob1, base 2, 1 bit per column
:4{}                    a blob2, 2 bits per column
:8{5235 0437 6}         a blob3, 3 bits per column
:16{A705E}              a blob4, 4 bits per column

Whitespace and underscores are allowed but ignored.

Radix interpolation

Characters indexed by hex numbers can be interpolated into strings by introducing with "\x", followed by either a bare hex number ("\x263a") or a hex number in square brackets ("\x[263a]"). Similarly, "\o12" and "\o[12]" interpolate octals--but generally you should be using hex in the world of Unicode. Multiple characters may be specified within any of the bracketed forms by separating the numbers with comma: "\x[41,42,43]". You must use the bracketed form to disambiguate if the unbracketed form would "eat" too many characters, because all of the unbracketed forms eat as many characters as they think look like digits in the radix specified. None of these notations work in normal Perl code. They work only in interpolations and regexes and the like.

Note that the inside of the brackets is not an expression, and you may not interpolate there, since that would be a double interpolation. Use curlies to interpolate the values of expressions.

The old \123 form is now illegal, as is the \0123 form. Only \0 remains, and then only if the next character is not in the range '0'..'7'. Octal characters must use \o notation. Note also that backreferences are no longer represented by \1 and the like--see S05.

Angle quotes (quote words)

The qw/foo bar/ quote operator now has a bracketed form: <foo bar>. When used as a subscript it performs a slice equivalent to {'foo','bar'}. Elsewhere it is equivalent to a parenthesized list of strings: ('foo','bar'). Since parentheses are generally reserved just for precedence grouping, they merely autointerpolate in flat list context. Therefore

@a = 1, < x y >, 2;

is equivalent to:

@a = 1, ('x', 'y'), 2;

which is the same as:

@a = 1, 'x', 'y', 2;

In item context, the implied grouping parentheses are still there, so

$a = < a b >;

is equivalent to:

$a = ('a', 'b');

which assigns a Parcel to the variable. On the other hand, if you backslash the parcel:

$a = \<a b>;

it is like:

$a = \('a', 'b');

and ends up storing a Capture object (which weeds out any named arguments into a separate structure, in contrast to a Parcel, which keeps everything in its original list).

Binding is different from assignment. If bound to a signature, the <a b> parcel will be promoted to a Capture object, but if bound to a parameter, it will make the flattening/slicing decision based on the nature of the individual parameter. That is, if you pass <a b> as an argument, it will bind as a single positional or slice item, but two slurpy items.

But note that under the parenthesis-rewrite rule, a single value will still act like a single value. These are all the same:

$a = < a >;
$a = ('a');
$a = 'a';

Strings within angle brackets are subject to val() processing, and any component that parses successfully as a numeric literal will become both a string and a number. See "Allomorphic value semantics" below.

Explicit Parcel construction

As the previous section shows, a parcel is not automatically constructed by parens; the parcel is actually constructed by the comma, not by the parens. To force a single value to become a composite object in item context, either add a comma inside parens, or use an appropriate constructor or composer for clarity as well as correctness:

$a = (< a >,);
$a = ('a',);
$a ='a');
$a = ['a'];

Disallowed forms

The degenerate case <> is disallowed as a probable attempt to do IO in the style of Perl 5; that is now written lines(). (<STDIN> is also disallowed.) Empty lists are better written with () or Nil in any case because <> will often be misread as meaning (''). (Likewise the subscript form %foo<> should be written %foo{} to avoid misreading as @foo{''}.) If you really want the angle form for stylistic reasons, you can suppress the error by putting a space inside: < >.

Relationship between <> and «»

Much like the relationship between single quotes and double quotes, single angles do not interpolate while double angles do. The double angles may be written either with French quotes, «$foo @bar[]», or with "Texas" quotes, <<$foo @bar[]>>, as the ASCII workaround. The implicit split is done after interpolation, but respects quotes in a shell-like fashion, so that «'$foo' "@bar[]"» is guaranteed to produce a list of two "words" equivalent to ('$foo', "@bar[]"). Pair notation is also recognized inside «...» and such "words" are returned as Pair objects.

Colon pairs (but not arrow pairs) are recognized within double angles. In addition, the double angles allow for comments beginning with #. These comments work exactly like ordinary comments in Perl code. Unlike in the shells, any literal # must be quoted, even ones without whitespace in front of them, but note that this comes more or less for free with a colon pair like :char<#x263a>, since comments only work in double angles, not single.

Adverbial Pair forms

There is now a generalized adverbial form of Pair notation. The following table shows the correspondence to the "fatarrow" notation:

Fat arrow           Adverbial pair  Paren form
=========           ==============  ==========
a => True           :a
a => False          :!a
a => 0              :a(0)
a => $x             :a($x)
a => 'foo'          :a<foo>         :a(<foo>)
a => <foo bar>      :a<foo bar>     :a(<foo bar>)
a => «$foo @bar»    :a«$foo @bar»   :a(«$foo @bar»)
a => {...}          :a{...}         :a({...})
a => [...]          :a[...]         :a([...])
a => $a             :$a
a => @a             :@a
a => %a             :%a
a => &a             :&a
a => $$a            :$$a
a => @$$a           :@$$a (etc.)
a => %foo<a>        %foo<a>:p

The fatarrow construct may be used only where a term is expected because it's considered an expression in its own right, since the fatarrow itself is parsed as a normal infix operator (even when autoquoting an identifier on its left). Because the left side is a general expression, the fatarrow form may be used to create a Pair with any value as the key. On the other hand, when used as above to generate Pair objects, the adverbial forms are restricted to the use of identifiers as keys. You must use the fatarrow form to generate a Pair where the key is not an identifier.

Despite that restriction, it's possible for other things to come between a colon and its brackets; however, all of the possible non-identifier adverbial keys are reserved for special syntactical forms. Perl 6 currently recognizes decimal numbers and the null key. In the following table the first and second columns do not mean the same thing:

Simple pair         DIFFERS from    which means
===========         ============    ===========
2 => <101010>       :2<101010>      radix literal 0b101010
8 => <123>          :8<123>         radix literal 0o123
16 => <deadbeef>    :16<deadbeef>   radix literal 0xdeadbeef
16 => $somevalue    :16($somevalue) radix conversion function
'' => $x            :($x)           signature literal
'' => ($x,$y)       :($x,$y)        signature literal
'' => <x>           :<x>            name extension
'' => «x»           :«x»            name extension
'' => [$x,$y]       :[$x,$y]        name extension
'' => { .say }      :{ .say }       adverbial block (not allowed on names)

All of the adverbial forms (including the normal ones with identifier keys) are considered special tokens and are recognized in various positions in addition to term position. In particular, when used where an infix would be expected they modify the previous topmost operator that is tighter in precedence than "loose unary" (see S03):

1 == 100 :fuzz(3)     # calls: infix:<==>(1, 100, fuzz => 3)

Within declarations the adverbial form is used to rename parameter declarations:

sub foo ( :externalname($myname) ) {...}

Adverbs modify the meaning of various quoting forms:

q:x 'cat /etc/passwd'

When appended to an identifier (that is, in postfix position), the adverbial syntax is used to generate unique variants of that identifier; this syntax is used for naming operators such as infix:<+> and multiply-dispatched grammatical rules such as statement_control:if. When so used, the adverb is considered an integral part of the name, so infix:<+> and infix:<-> are two different operators. Likewise prefix:<+> is different from infix:<+>. (The notation also has the benefit of grouping distinct identifiers into easily accessible sets; this is how the standard Perl 6 grammar knows the current set of infix operators, for instance.)

Only identifiers that produce a list of one or more values (preferably strings) are allowed as name extensions; in particular, closures do not qualify as values, so the :{...} form is not allowed as a name extender. In particular, this frees up the block form after a method name, so it allows us to parse a block as a method argument:

@stuff.sort:{ +$_ }.map:{ $_ * 2 }

These might look like it is using pairs, but it is really equivalent to

@stuff.sort: { +$_ }.map: { $_ * 2 }

and the colons are not introducing pairs, but rather introducing the argument list of the method. (In any other location, :{...} would be taken as a pair mapping the null key to a closure.)

Either fatarrow or adverbial pair notation may be used to pass named arguments as terms to a function or method. After a call with parenthesized arguments, only the adverbial syntax may be used to pass additional arguments. This is typically used to pass an extra block:

find($directory) :{ when not /^\./ }

This just naturally falls out from the preceding rules because the adverbial block is in operator position, so it modifies the "find operator". (Parens aren't considered an operator.)

Note that (as usual) the {...} form (either identifier-based or special) can indicate either a closure or a hash depending on the contents. It does not indicate a subscript, since :key{} is really equivalent to key = {}>, and the braces are not behaving as a postfix at all. (The function to which it is passed can use the value as a subscript if it chooses, however.)

Note also that the <a b> form is not a subscript and is therefore equivalent not to .{'a','b'} but rather to ('a','b'). Bare <a> turns into ('a') rather than ('a',). (However, as with the other bracketed forms, the value may end up being used as a subscript depending on context.)

Two or more adverbs can always be strung together without intervening punctuation anywhere a single adverb is acceptable. When used as named arguments in an argument list, you may put comma between, because they're just ordinary named arguments to the function, and a fatarrow pair would work the same. However, this comma is allowed only when the first pair occurs where a term is expected. Where an infix operator is expected, the adverb is always taken as modifying the nearest preceding operator that is not hidden within parentheses, and if you string together multiple such pairs, you may not put commas between, since that would cause subsequent pairs to look like terms. (The fatarrow form is not allowed at all in operator position.) See S06 for the use of adverbs as named arguments.

The negated form (:!a) and the sigiled forms (:$a, :@a, :%a) never take an argument and don't care what the next character is. They are considered complete. These forms require an identifier to serve as the key.

For identifiers that take a numeric argument, it is allowed to abbreviate, for example, :sweet(16) to :16sweet. (This is distinguishable from the :16<deadbeef> form, which never has an alphabetic character following the number.) Only literal decimal numbers may be swapped this way.

The other forms of adverb (including the bare :a form) always look for an immediate bracketed argument, and will slurp it up. If that's not intended, you must use whitespace between the adverb and the opening bracket. The syntax of individual adverbs is the same everywhere in Perl 6. There are no exceptions based on whether an argument is wanted or not. (There is a minor exception for quote and regex adverbs, which accept only parentheses as their bracketing operator, and ignore other brackets, which must be placed in parens if desired. See "Paren form" in the table above.)

Except as noted above, the parser always looks for the brackets. Despite not indicating a true subscript, the brackets are similarly parsed as postfix operators. As postfixes the brackets may be separated from their initial :foo with either unspace or dot (or both), but nothing else.

Regardless of syntax, adverbs used as named arguments (in either term or infix position) generally show up as optional named parameters to the function in question--even if the function is an operator or macro. The function in question neither knows nor cares how weird the original syntax was.

Q forms

In addition to q and qq, there is now the base form Q which does no interpolation unless explicitly modified to do so. So q is really short for Q:q and qq is short for Q:qq. In fact, all quote-like forms derive from Q with adverbs:

q//         Q :q //
qq//        Q :qq //
rx//        Q :regex //
s///        Q :subst ///
tr///       Q :trans ///

Adverbs such as :regex change the language to be parsed by switching to a different parser. This can completely change the interpretation of any subsequent adverbs as well as the quoted material itself.

q:s//       Q :q :scalar //
rx:s//      Q :regex :sigspace //

Just as q[...] has the short form '...', and qq[...] has the short form "...", the completely quoted Q[...] has a short form that uses halfwidth corner brackets: 「...」.

Adverbs on quotes

Generalized quotes may now take adverbs:

Short       Long            Meaning
=====       ====            =======
:x          :exec           Execute as command and return results
:w          :words          Split result on words (no quote protection)
:ww         :quotewords     Split result on words (with quote protection)
:v          :val            Evaluate word or words for value literals
:q          :single         Interpolate \\, \q and \' (or whatever)
:qq         :double         Interpolate with :s, :a, :h, :f, :c, :b
:s          :scalar         Interpolate $ vars
:a          :array          Interpolate @ vars
:h          :hash           Interpolate % vars
:f          :function       Interpolate & calls
:c          :closure        Interpolate {...} expressions
:b          :backslash      Interpolate \n, \t, etc. (implies :q at least)
:to         :heredoc        Parse result as heredoc terminator
            :regex          Parse as regex
            :subst          Parse as substitution
            :trans          Parse as transliteration
            :code           Quasiquoting
:p          :path           Return a Path object (see S16 for more options)

You may omit the first colon by joining an initial Q, q, or qq with a single short form adverb, which produces forms like:

qw /a b c/;                         # P5-esque qw// meaning q:w
Qc '...{$x}...';                    # Q:c//, interpolate only closures
qqx/$cmd @args[]/                   # equivalent to P5's qx//

(Note that qx// doesn't interpolate.)

If you want to abbreviate further, just define a macro:

macro qx { 'qq:x ' }          # equivalent to P5's qx//
macro qTO { 'qq:x:w:to ' }    # qq:x:w:to//
macro quote:<❰ ❱> ($text) { quasi { {{{$text}}}.quoteharder } }

All the uppercase adverbs are reserved for user-defined quotes. All Unicode delimiters above Latin-1 are reserved for user-defined quotes.

A consequence of the above is that we can now say:

%hash = qw:c/a b c d {@array} {%hash}/;


%hash = qq:w/a b c d {@array} {%hash}/;

to interpolate items into a qw. Conveniently, arrays and hashes interpolate with only whitespace separators by default, so the subsequent split on whitespace still works out. (But the built-in «...» quoter automatically does interpolation equivalent to qq:ww:v/.../. The built-in <...> is equivalent to q:w:v/.../.)

The :val modifier

The :v/:val modifier runs each word through the val() function, which will attempt to recognize literals as defined by the current slang. (See "Allomorphic value semantics" below.) Only pure literals such as numbers, versions, and enums are so recognized; all other words are left as strings. In any case, use of such an intuited value as a string will reproduce the original string including any leading or trailing whitespace:

say +val(' +2/4 ')   # '0.5'
say ~val(' +2/4 ')   # ' +2/4 '

Of course, words derived from :w and :ww will not have any whitespace, since that is what the words are split apart on.

Whitespace before adverbs

Whitespace is allowed between the "q" and its adverb: q :w /.../.

Delimiters of quoting forms

For these "q" forms the choice of delimiters has no influence on the semantics. That is, '', "", <>, «», ``, (), [], and {} have no special significance when used in place of // as delimiters. There may be whitespace before the opening delimiter. (Which is mandatory for parens because q() is a subroutine call and q:w(0) is an adverb with arguments). Other brackets may also require whitespace when they would be understood as an argument to an adverb in something like q:z<foo>//. A colon may never be used as the delimiter since it will always be taken to mean another adverb regardless of what's in front of it. Nor may a # character be used as the delimiter since it is always taken as whitespace (specifically, as a comment). You may not use whitespace or alphanumerics for delimiters.

Quotes from Macros

New quoting constructs may be declared as macros:

macro quote:<qX> (*%adverbs) {...}

Note: macro adverbs are automatically evaluated at macro call time if the adverbs are included in the parse. If an adverb needs to affect the parsing of the quoted text of the macro, then an explicit named parameter may be passed on as a parameter to the is parsed subrule, or used to select which subrule to invoke.

Interpolating into a single-quoted string

You may interpolate double-quotish text into a single-quoted string using the \qq[...] construct. Other "q" forms also work, including user-defined ones, as long as they start with "q". Otherwise you'll just have to embed your construct inside a \qq[...].

Interpolation rules

Bare scalar variables always interpolate in double-quotish strings. Bare array, hash, and subroutine variables may never be interpolated. However, any scalar, array, hash or subroutine variable may start an interpolation if it is followed by a sequence of one or more bracketed dereferencers: that is, any of:

1. An array subscript
2. A hash subscript
3. A set of parentheses indicating a function call
4. Any of 1 through 3 in their dot form
5. A method call that includes argument parentheses
6. A sequence of one or more unparenthesized method call, followed by any of 1 through 5

In other words, this is legal:

"Val = $a.ord.fmt('%x')\n"

and is equivalent to

"Val = { $a.ord.fmt('%x') }\n"

However, no interpolated postfix may start with a backslash, so any backslash or unspace is not recognized, but instead will be assumed to be part of the string outside of the interpolation, and subject to the normal backslashing rules of that quote context:

my $a = 42;
"Val = $a\[junk\]";  # Val = 42[junk]
"Val = $a\[junk]";   # Val = 42[junk]
"Val = $a\ [junk]";  # Val = 42 [junk]
"Val = $a\.[junk]";  # Val = 42.[junk]


In order to interpolate an entire array, it's necessary now to subscript with empty brackets:

print "The answers are @foo[]\n"

Note that this fixes the spurious "@" problem in double-quoted email addresses.

As with Perl 5 array interpolation, the elements are separated by a space. (Except that a space is not added if the element already ends in some kind of whitespace. In particular, a list of pairs will interpolate with a tab between the key and value, and a newline after the pair.)


In order to interpolate an entire hash, it's necessary to subscript with empty braces or angles:

print "The associations are:\n%bar{}"
print "The associations are:\n%bar<>"

Note that this avoids the spurious "%" problem in double-quoted printf formats.

By default, keys and values are separated by tab characters, and pairs are terminated by newlines. (This is almost never what you want, but if you want something polished, you can be more specific.)

Sub calls

In order to interpolate the result of a sub call, it's necessary to include both the sigil and parentheses:

print "The results are &baz().\n"

Method calls

In order to interpolate the result of a method call without arguments, it's necessary to include parentheses or extend the call with something ending in brackets:

print "The attribute is $obj.attr().\n"
print "The attribute is $obj.attr<Jan>.\n"

The method is called in item context. (If it returns a list, that list is interpolated as if it were an array.)

It is allowed to have a cascade of argumentless methods as long as the last one ends with parens:

print "The attribute is %obj.keys.sort.reverse().\n"

(The cascade is basically counted as a single method call for the end-bracket rule.)

Multiple dereferencers

Multiple dereferencers may be stacked as long as each one ends in some kind of bracket or is a bare method:

print "The attribute is @baz[3](1, 2, 3).gethash.{$xyz}<blurfl>.attr().\n"

Note that the final period above is not taken as part of the expression since it doesn't introduce a bracketed dereferencer. The parens are not required on the .gethash, but they are required on the .attr(), since that terminates the entire interpolation.

In no case may any of the top-level components be separated by whitespace or unspace. (These are allowed, though, inside any bracketing constructs, such as in the (1, 2, 3) above.)


A bare closure also interpolates in double-quotish context. It may not be followed by any dereferencers, since you can always put them inside the closure. The expression inside is evaluated in string item context. You can force list context on the expression using the list operator if necessary. A closure in a string establishes its own lexical scope. (Expressions that sneak in without curlies, such as $(...), do not establish their own lexical scope, but use the outer scope, and may even declare variables in the outer scope, since all the code inside (that isn't in an eval) is seen at compile time.)

The following means the same as the previous example.

print "The attribute is { @baz[3](1,2,3).gethash.{$xyz}<blurfl>.attr }.\n"

The final parens are unnecessary since we're providing "real" code in the curlies. If you need to have double quotes that don't interpolate curlies, you can explicitly remove the capability:

qq:c(0) "Here are { $two uninterpolated } curlies";

or equivalently:

qq:!c "Here are { $two uninterpolated } curlies";

Alternately, you can build up capabilities from single quote to tell it exactly what you do want to interpolate:

q:s 'Here are { $two uninterpolated } curlies';


Secondary sigils (twigils) have no influence over whether the primary sigil interpolates. That is, if $a interpolates, so do $^a, $*a, $=a, $?a, $.a, etc. It only depends on the $.

Other expressions

No other expressions interpolate. Use curlies.

Class methods

A class method may not be directly interpolated. Use curlies:

print "The dog bark is {Dog.bark}.\n"

Old disambiguation

The old disambiguation syntax:


is dead. Use closure curlies instead:


(You may be detecting a trend here...)

Topical methods

To interpolate a topical method, use curlies: "{.bark}".

Function calls

To interpolate a function call without a sigil, use curlies: "{abs $var}".

Backslash sequences

Backslash sequences still interpolate, but there's no longer any \v to mean vertical tab, whatever that is... (\v now matches vertical whitespace in a regex.) Literal character representations are:

\a          BELL
\b          BACKSPACE
\t          TAB
\n          LINE FEED
\f          FORM FEED
\e          ESCAPE

Other functions

There's also no longer any \L, \U, \l, \u, or \Q. Use curlies with the appropriate function instead: "{tclc $word}".

Unicode codepoints

You may interpolate any Unicode codepoint by name using \c and square brackets:


Multiple codepoints constituting a single character may be interpolated with a single \c by separating the names with comma:


Whether that is regarded as one character or two depends on the Unicode support level of the current lexical scope. It is also possible to interpolate multiple codepoints that do not resolve to a single character:


[Note: none of the official Unicode character names contains comma.]

You may also put one or more decimal numbers inside the square brackets:

"\c[13,10]" # CRLF

Any single decimal number may omit the brackets:

"\c8" # backspace

(Within a regex you may also use \C to match a character that is not the specified character.)

If the character following \c or \C is neither a left square bracket nor a decimal digit, the single following character is turned into a control character by the usual trick of XORing the 64 bit. This allows \c@ for NULL and \c? for DELETE, but note that the ESCAPE character may not be represented that way; it must be represented something like:


Obviously \e is preferred when brevity is needed.


Any character that would start an interpolation in the current quote context may be protected from such interpolation by prefixing with backslash. The backslash is always removed in this case.

The treatment of backslashed characters that would not have introduced an interpolation varies depending on the type of quote:

  1. Any quoting form that includes qq or :qq in its semantic derivation (including the normal double quote form) assumes that all backslashes are to be considered meaningful. The meaning depends on whether the following character is alphanumeric; if it is, the non-interpolating sequence produces a compile-time error. If the character is non-alphanumeric, the backslash is silently removed, on the assumption that the string was backslashed using quotemeta() or some such.

  2. All other quoting forms (including standard single quotes) assume that non-interpolating sequences are to be left unaltered because they are probably intended to pass through to the result. Backslashes are removed only for the terminating quote or for characters that would interpolate if unbackslashed. (In either case, a special exception is made for brackets; if the left bracket would interpolate, the right bracket may optionally also be backslashed, and if so, the backslash will be removed. If brackets are used as the delimiters, both left and right must be backslashed the same, since they would otherwise be counted wrong in the bracket count.)

As a consequence, these all produce the same literal string:

" \{ this is not a closure } "
" \{ this is not a closure \} "
q:c / \{ this is not a closure } /
q:c / \{ this is not a closure \} /
q:c { \{ this is not a closure \} }
q { { this is not a closure } }
q { \{ this is not a closure \} }

(Of course, matching backslashes is likely to make your syntax highlighter a bit happier, along with any other naïve bracket counting algorithms...)

Bare identifiers

There are no barewords in Perl 6. An undeclared bare identifier will always be taken to mean a subroutine name, and be parsed as a list operator. (Class names (and other type names) are predeclared, or prefixed with the :: type sigil when you're declaring a new one.) A consequence of this is that there's no longer any "use strict 'subs'". Since the syntax for method calls is distinguished from sub calls, it is only unrecognized sub calls that must be treated specially.

You still must declare your subroutines, but a bareword with an unrecognized name is provisionally compiled as a subroutine call, on the assumption that such a declaration will occur by the end of the current compilation unit:

foo;         # provisional call if neither &foo nor ::foo is defined so far
foo();       # provisional call if &foo is not defined so far
foo($x);     # provisional call if &foo is not defined so far
foo($x, $y); # provisional call if &foo is not defined so far

$;      # not a provisional call; it's a method call on $x
foo $x:;     # not a provisional call; it's a method call on $x
foo $x: $y;  # not a provisional call; it's a method call on $x

If a postdeclaration is not seen, the compile fails at CHECK time. (You are still free to predeclare subroutines explicitly, of course.) The postdeclaration may be in any lexical or package scope that could have made the declaration visible to the provisional call had the declaration occurred before rather than after the provisional call.

This fixup is done only for provisional calls. If there is any real predeclaration visible, it always takes precedence.

If the unrecognized subroutine name is followed by postcircumfix:<( )>, it is compiled as a provisional function call of the parenthesized form. If it is not, it is compiled as a provisional function call of the list operator form, which may or may not have an argument list. When in doubt, the attempt is made to parse an argument list. As with any list operator, an immediate postfix operator is illegal unless it is a form of parentheses, whereas anything following whitespace will be interpreted as an argument list if possible.

Some examples of how listops, methods and labels interact syntactically:             # foo().bar
foo .bar            # foo($   -- no postfix starts with whitespace
foo\ .bar           # foo().bar
foo++               # foo()++
foo 1,2,3           # foo(1,2,3)    -- args always expected after listop
foo + 1             # foo(+1)       -- term always expected after listop
foo;                # foo();        -- no postfix, but no args either
foo:                #   label       -- must be label at statement boundary.
                                    -- ILLEGAL otherwise
foo: bar:           #   two labels in a row, okay
.foo: 1             # $ 1     -- must be "dot" method with : args
.foo(1)             # $     -- must be "dot" method with () args
.foo                # $      -- must be "dot" method with no args
.$foo: 1            # $_.$foo: 1    -- indirect "dot" method with : args
foo bar: 1          #    -- bar must be predecl as class
                                    -- sub bar allowed here only if 0-ary
                                    -- otherwise you must say (bar):
foo bar 1           # foo(bar(1))   -- both subject to postdeclaration
                                    -- never taken as indirect object
foo $bar: 1         # $   -- indirect object even if declared sub
                                    -- $bar considered one token
foo (bar()): 1      # bar().foo(1)  -- even if foo declared sub
foo bar():          # ILLEGAL       -- bar() is two tokens.
foo .bar:           # foo(.bar:)    -- colon chooses .bar to listopify
foo bar baz: 1      # foo( -- colon controls "bar", not foo.
foo (bar baz): 1    # bar(baz()).foo(1) -- colon controls "foo"
$foo $bar           # ILLEGAL       -- two terms in a row
$foo $bar:          # ILLEGAL       -- use $bar.$foo for indirection
(foo bar) baz: 1    # ILLEGAL       -- use $baz.$(foo bar) for indirection

The indirect object colon only ever dominates a simple term, where "simple" includes classes and variables and parenthesized expressions, but explicitly not method calls, because the colon will bind to a trailing method call in preference. An indirect object that parses as more than one token must be placed in parentheses, followed by the colon.

In short, only an identifier followed by a simple term followed by a postfix colon is ever parsed as an indirect object, but that form will always be parsed as an indirect object regardless of whether the identifier is otherwise declared.


There's also no "use strict 'refs'" because symbolic dereferences are now syntactically distinguished from hard dereferences. @($array) must now provide an actual array object, while @::($string) is explicitly a symbolic reference. (Yes, this may give fits to the P5-to-P6 translator, but I think it's worth it to separate the concepts. Perhaps the symbolic ref form will admit real objects in a pinch.)

Hash subscripts and bare keys

There is no hash subscript autoquoting in Perl 6. Use %x<foo> for constant hash subscripts, or the old standby %x{'foo'}. (It also works to say %x«foo» as long as you realized it's subject to interpolation.)

But => still autoquotes any bare identifier to its immediate left (horizontal whitespace allowed but not comments). The identifier is not subject to keyword or even macro interpretation. If you say

$x = do {
    if => 1;

then $x ends up containing the pair ("if" => 1). Always. (Unlike in Perl 5, where version numbers didn't autoquote.)

You can also use the :key($value) form to quote the keys of option pairs. To align values of option pairs, you may use the "unspace" postfix forms:

:longkey\  ($value)
:shortkey\ <string>
:fookey\   { $^a <=> $^b }

These will be interpreted as

:fookey{ $^a <=> $^b }

Double-underscore forms

The double-underscore forms are going away:

Old                 New
---                 ---
__LINE__            $?LINE
__FILE__            $?FILE
__PACKAGE__         $?PACKAGE
__END__             =begin END
__DATA__            =begin DATA

The =begin finish Pod stream (usually written as just =finish) is special in that it assumes there's no corresponding =end finish before end of file. Anything in a source file after a =finish is always treated as Pod.

There is no longer any special DATA stream--any Pod block in the current file can be accessed via a Pod object, such as $=data or $=SYNOPSIS or $=UserBlock etc. That is: a variable with the same name of the desired block, and a = twigil.

These Pod objects can be used as Positionals (indexed by their block sequence). They can also be treated as Associatives (indexed by :key options specified with the block). Either way, each Positional or Associative element represents the entire contents of the corresponding Pod block. You have to split those contents into lines yourself. Each chunk has a .range property that indicates its line number range within the source file.

[Speculative] It may also be possible to treat a Pod object as an IO, to read the Pod information line-by-line (like the DATA filehandle in Perl 5, but for any Pod block).

The lexical routine itself is &?ROUTINE; you can get its name with &? The current block is &?BLOCK. If the block has any labels, those shows up in &?BLOCK.labels. Within the lexical scope of a statement with a label, the label is a pseudo-object representing the dynamically visible instance of that statement. (If inside multiple dynamic instances of that statement, the label represents the innermost one.) This is known as lexotic semantics.

When you say:

next LINE;

it is really a method on this pseudo-object, and;

would work just as well. You can exit any labeled block early by saying



Heredocs are no longer written with <<, but with an adverb on any other quote construct:

print qq:to/END/;
    Give $amount to the man behind curtain number $curtain.

Other adverbs are also allowed, as are multiple heredocs within the same expression:

print q:c:to/END/, q:to/END/;
    Give $100 to the man behind curtain number {$curtain}.
    Here is a $non-interpolated string

Optional whitespace

Heredocs allow optional whitespace both before and after terminating delimiter. Leading whitespace equivalent to the indentation of the delimiter will be removed from all preceding lines. If a line is deemed to have less whitespace than the terminator, only whitespace is removed, and a warning may be issued. (Hard tabs will be assumed to be ($?TABSTOP // 8) spaces, but as long as tabs and spaces are used consistently that doesn't matter.) A null terminating delimiter terminates on the next line consisting only of whitespace, but such a terminator will be assumed to have no indentation. (That is, it's assumed to match at the beginning of any whitespace.)

One-pass heredoc parsing

There are two possible ways to parse heredocs. One is to look ahead for the newline and grab the lines corresponding to the heredoc, and then parse the rest of the original line. This is how Perl 5 does it. Unfortunately this suffers from the problem pervasive in Perl 5 of multi-pass parsing, which is masked somewhat because there's no way to hide a newline in Perl 5. In Perl 6, however, we can use "unspace" to hide a newline, which means that an algorithm looking ahead to find the newline must do a full parse (with possible untoward side effects) in order to locate the newline.

Instead, Perl 6 takes the one-pass approach, and just lazily queues up the heredocs it finds in a line, and waits until it sees a "real" newline to look for the text and attach it to the appropriate heredoc. The downside of this approach is a slight restriction--you may not use the actual text of the heredoc in code that must run before the line finishes parsing. Mostly that just means you can't write:

BEGIN { say q:to/END/ }
    Say me!

You must instead put the entire heredoc into the BEGIN:

    say q:to/END/;
    Say me!

Version literals

A version literal is written with a 'v' followed by the version number in dotted form. This always constructs a Version object, not a string. Only integers and certain wildcards are allowed; for anything fancier you must coerce a string to a Version:

v1.2.3                      # okay
v1.2.*                      # okay, wildcard version
v1.2.3+                     # okay, wildcard version
v1.2.3beta                  # illegal
Version('1.2.3beta')        # okay

Note though that most places that take a version number in Perl accept it as a named argument, in which case saying :ver<1.2.3beta> is fine. See S11 for more on using versioned modules.

Version objects have a predefined sort order that follows most people's intuition about versioning: each sorting position sorts numerically between numbers, alphabetically between alphas, and alphabetics in a position before numerics. Missing final positions are assumed to be '.0'. Except for '0' itself, numbers ignore leading zeros. For splitting into sort positions, if any alphabetics (including underscore) are immediately adjacent to a number, a dot is assumed between them. Likewise any non-alphanumeric character is assumed to be equivalent to a dot. So these are all equivalent:


And these are also equivalent:


So these are in sorted version order:

Note how the last pair assume that an implicit .0 sorts after anything alphabetic, and that alphabetic is defined according to Unicode, not just according to ASCII. The intent of all this is to make sure that prereleases sort before releases. Note also that this is still a subset of the versioning schemes seen in the real world. Modules with such strange versions can still be used by Perl since by default Perl imports external modules by exact version number. (See S11.) Only range operations will be compromised by an unknown foreign collation order, such as a system that sorts "delta" after "gamma".

Allomorphic value semantics

When val() processing is attempted on any list of strings (typically on the individual words within angle brackets), the function attempts to determine if the intent of the programmer or user might have been to provide a numeric value.

For any item in the list that appears to be numeric, the literal is stored as an object with both a string and a numeric nature, where the string nature always returns the original string. This is implemented via multiple inheritance, to truly represent the allomorphic nature of a literal value that has not committed to which type the user intends. The numeric type chosen depends on the appearance of the literal. Hence:

< 1 1/2 6.02e23 1+2i >

produces objects of classes defined as:

class IntStr is Int is Str {...}; IntStr('1')
class RatStr is Rat is Str {...}; RatStr('1/2')
class NumStr is Num is Str {...}; NumStr('6.02e23')
class ComplexStr is Complex is Str {...}; ComplexStr('1+2i')

One purpose of this is to facilitate compile-time analysis of multi-method dispatch, when the user prefers angle notation as the most readable way to represent a list of numbers, which it often is. Due to the MI semantics, the new object is equally a string and a number, and can be bound as-is to either a string or a numeric parameter.

In case multiple dispatch determines that it could dispatch as either string or number, a tie results, which may result in an ambiguous dispatch error. You'll need to use prefix + or ~ on the argument to resolve the ambiguity in that case.

[Conjecture: we may someday find a way to make strings bind a little looser than the numeric types, but for now we conservatively outlaw the dispatch as ambiguous, and watch how this plays out in use.]

The allomorphic behavior of angle brackets is not a special case; it's actually an example of a more general process of figuring out type information by parsing text that comes from any situation where the user is forced to enter text when they really mean other kinds of values. A function prompting the user for a single value might usefully pass the result through val() to intuit the proper type.

The angle form with a single value serves as the literal form of numbers such as Rat and Complex that would otherwise have to be constructed via constant folding. It also gives us a reasonable way of visually isolating any known literal format as a single syntactic unit:

(-1+2i).polar       # same, but only by constant folding

Any such literal, when written without spaces, produces a pure numeric value without a stringy allomorphism. Put spaces to override that:

<1/2>       # a Rat
< 1/2 >     # a RatStr

Or use the «» form of quotewords, which is always allomorphic:

«1/2»       # a RatStr
« 1/2 »     # a RatStr

Allomorphic Rats

Any rational literal that would overflow a Rat64 in the numerator is also stored as a string. (That is, angle brackets will be assumed in this case, producing a RatStr.) If a coercion to a wider type, such as FatRat, is requested, the literal reconverts from the entire original string, rather than just the value that would fit into a Rat64. (It may then cache that converted value for next time, of course.) So if you declare a constant with excess precision, it does not automatically become a FatRat, which would force all calculations into the pessimal FatRat type.

constant pi is export = 3.14159_26535_89793_23846_26433_83279_50288;
say pi.norm.nude # 1570796326794896619 500000000000000000 (as Rat, reduced)
say pi.perl;     # 3.14159_26535_89793_23846_26433_83279_50288
say pi.Num       # 3.14159265358979 (approximately)
say pi.Str;      # 3.14159_26535_89793_23846_26433_83279_50288
say pi.FatRat;   # 3.14159265358979323846264338327950288


  • Perl still has the three main contexts: sink (aka void), item (aka scalar), and list.

  • In addition to undifferentiated items, we also have these item contexts:

    Context     Type    OOtype   Operator
    -------     ----    ------   --------
    boolean     bit     Bit      ?
    integer     int     Integral int
    numeric     num     Num      +
    string      buf     Str      ~

    There are also various container contexts that require particular kinds of containers (such as slice and hash context; see S03 for details).

  • Unlike in Perl 5, objects are no longer always considered true. It depends on the state of their .Bool method, which may either be a synthetic attribute or an explicitly represented bit in the object. Classes get to decide which of their values are true and which are false. Individual objects can override the class definition:

    return 0 but True;

    This overrides the .Bool method of the 0 without changing its official type (by mixing the method into an anonymous derived type).

  • The definition of .Bool for the most ancestral type (that is, the Mu type) is equivalent to .defined. Since type objects are considered undefined, all type objects (including Mu itself) are false unless the type overrides the definition of .Bool to include undefined values. Instantiated objects default to true unless the class overrides the definition. Note that if you could instantiate a Mu it would be considered defined, and thus true. (It is not clear that this is allowed, however.)

  • In general any container types should return false if they are empty, and true otherwise. This is true of all the standard container types except Scalar, which always defers the definition of truth to its contents. Non-container types define truthiness much as Perl 5 does.

    Just as with the standard types, user-defined types should feel free to partition their defined values into true and false values if such a partition makes sense in control flow using boolean contexts, since the separate .defined method is always there if you need it.


Lazy flattening

List context in Perl 6 is by default lazy. This means a list can contain infinite generators without blowing up. No flattening happens to a lazy list until it is bound to the signature of a function or method at call time (and maybe not even then). We say that such an argument list is "lazily flattened", meaning that we promise to flatten the list on demand, but not before.

list, flat, item, and .tree

There is a "list" operator which imposes a list context on its arguments even if list itself occurs in a item context.

To force explicit flattening, use the flat contextualizer. This recursively flattens all parcels into a 1-dimensional list. When bound to a slurpy parameter, a capture flattens the rest of its positional arguments.

To reform a list so that sub-parcels turn into tree nodes, use the .tree method, which is essentially a level-sensitive map, with one closure provided for remapping the parcels at each level:

$p.tree(*.Seq)        # force level 1 parcels to Seq
$p.tree(1)            # same thing
$p.tree               # same thing, defaults to 1 level
$p.tree(*.Seq,*.list) # force level 1 parcels to Seq, level 2 to list
$p.tree(*.Seq xx *)   # Turn all subparcels into Seq recursively
$p.tree(*)            # same thing

When bound to a slice parameter (indicated with **), a capture reforms the rest of its positional arguments with one level of "treeness", equivalent to @args.tree(1), that is, a list of lists, or LoL. The sublists are not automatically flattened; that is, if a sublist is a Parcel, it remains a list until subsequent processing decides how flat or treelike the sublist should be.

When bound to an item parameter that is not an invocant, a list is turned into a lazy Seq object, that is, an array that can extend itself on demand, use the iterators of the list as its new values. (Once determined, the values are readonly, however. To create an anonymous mutable array, use explicit square brackets around the list.)

To force a non-flattening item context, use the "item" operator.

Forcing capture context

The | prefix operator may be used to force "capture" context on its argument and also defeat any scalar argument checking imposed by subroutine signature declarations. Any resulting list arguments are then evaluated lazily.

The eager operator

To force non-lazy list processing, use the eager list operator. List assignment is also implicitly eager. (Actually, when we say "eager" we usually mean "mostly eager" as defined in S07).

eager $filehandle.lines;    # read all remaining lines

By contrast,


makes no guarantee about how many lines ahead the iterator has read. Iterators feeding a list are allowed to process in batches, even when stored within an array. The array knows that it is extensible, and calls the iterator as it needs more elements. (Counting the elements in the array will also force eager completion.)

This operator is agnostic towards flattening or slicing. In merely changes the work-ahead policy for the value generator.

The hyper operator

A variant of eager is the hyper list operator, which declares not only that you want all the values generated now, but that you want them badly enough that you don't care what order they're generated in. That is, eager requires sequential evaluation of the list, while hyper requests (but does not require) parallel evaluation. In any case, it declares that you don't care about the evaluation order. (Conjecture: populating a hash from a hyper list of pairs could be done as the results come in, such that some keys can be seen even before the hyper is done. Thinking about Map-Reduce algorithms here...)

This operator is agnostic towards flattening or slicing. It merely changes the work-ahead policy for the value generator.

The race operator

A further variant of hyper is the race list operator, which declares that you want the results so badly that you don't care what order they come back in. Within its arguments, the race operator forces parallel evaluation of any iterator, hyper, or junction, such that if any single thread dies or hangs its computation, it does not block any other thread from returning its results to the race list. When the demand for the race list drops, hung threads may be killed. You can think of it as a gather with a 'try take async {...}' on parallel computation. Note that exceptions are trapped by default; if your car crashes, you simply do not finish the race. If you want notifications of some sort back to the pit crew, you'll have to arrange them yourself.

This operator is agnostic towards flattening or slicing. It merely changes the work-ahead policy for the value generator. It is a transitive contextualizer insofar as iterators will have to pass on the policy to subiterators.

The => operator

The => operator now constructs Pair objects rather than merely functioning as a comma. Both sides are in item context.

The .. operator

The .. operator now constructs a Range object rather than merely functioning as an operator. Both sides are in item context. Semantically, the Range acts like a list of its values to the extent possible, but does so lazily, unlike Perl 5's eager range operator.

Hash assignment

There is no such thing as a hash list context. Assignment to a hash produces an ordinary list context. You may assign alternating keys and values just as in Perl 5. You may also assign lists of Pair objects, in which case each pair provides a key and a value. You may, in fact, mix the two forms, as long as the pairs come when a key is expected. If you wish to supply a Pair as a key, you must compose an outer Pair in which the key is the inner Pair:

%hash = (($keykey => $keyval) => $value);

The anonymous enum function

The anonymous enum function takes a list of keys or pairs, and adds values to any keys that are not already part of a pair. The value added is one more than the previous key or pair's value. This works nicely with the new qq:ww form:

%hash = enum <<:Mon(1) Tue Wed Thu Fri Sat Sun>>;
%hash = enum « :Mon(1) Tue Wed Thu Fri Sat Sun »;

are the same as:

%hash = ();
%hash<Mon Tue Wed Thu Fri Sat Sun> = 1..7;

Hash binding

In contrast to assignment, binding to a hash requires a Hash (or Pair) object, or anything that does the Associative role.


  • Filename globs are no longer done with angle brackets. Use the glob function.

  • Input from a filehandle is no longer done with angle brackets. Instead of

    while (<HANDLE>) {...}

    you now write

    for $handle.lines {...}

Grammatical Categories

Lexing in Perl 6 is controlled by a system of grammatical categories. At each point in the parse, the lexer knows which subset of the grammatical categories are possible at that point, and follows the longest-token rule across all the active alternatives, including those representing any grammatical categories that are ready to match. See S05 for a detailed description of this process.

To get a list of the current categories, grep 'token category:' from STD.pm6.

Category names are used as the short name of both various operators and the rules that parse them, though the latter include an extra "sym":

infix:<cmp>           # the infix cmp operator
infix:sym<cmp>        # the rule that parses cmp

As you can see, the extension of the name uses colon pair notation. The :sym typically takes an argument giving the string name of the operator; some of the "circumfix" categories require two arguments for the opening and closing strings. Since there are so many match rules whose symbol is an identifier, we allow a shorthand:

infix:cmp             # same as infix:sym<cmp> (not infix:<cmp>)

Conjecturally, we might also have other kinds of rules, such as tree rewrite rules:

infix:match<cmp>      # rewrite a match node after reducing its arguments
infix:ast<cmp>        # rewrite an ast node after reducing its arguments

Within a grammar, matching the proto subrule <infix> will match all visible rules in the infix category as parallel alternatives, as if they were separated by '|'.

Here are some of the names of parse rules in STD:

category:sym<prefix>                           prefix:<+>
circumfix:sym<[ ]>                             [ @x ]
dotty:sym<.=>                                  $obj.=method
infix_circumfix_meta_operator:sym['»','«']     @a »+« @b
infix_postfix_meta_operator:sym<=>             $x += 2;
infix_prefix_meta_operator:sym<!>              $x !~~ 2;
infix:sym<+>                                   $x + $y
package_declarator:sym<role>                   role Foo;
postcircumfix:sym<[ ]>                         $x[$y] or $x.[$y]
postfix_prefix_meta_operator:sym('»')          @array »++
postfix:sym<++>                                $x++
prefix_circumfix_meta_operator:sym<[ ]>       [*]
prefix_postfix_meta_operator:sym('«')          -« @magnitudes
prefix:sym<!>                                  !$x (and $x.'!')
quote:sym<qq>                                  qq/foo/
routine_declarator:sym<sub>                    sub foo {...}
scope_declarator:sym<has>                      has $.x;
sigil:sym<%>                                   %hash
special_variable:sym<$!>                       $!
statement_control:sym<if>                      if $condition { 1 } else { 2 }
statement_mod_cond:sym<if>                     .say if $condition
statement_mod_loop:sym<for>                    .say for 1..10
statement_prefix:sym<gather>                   gather for @foo { .take }
term:sym<!!!>                                  $x = { !!! }
trait_mod:sym<does>                            my $x does Freezable
twigil:sym<?>                                  $?LINE
type_declarator:sym<subset>                    subset Nybble of Int where ^16

Note that some of these produce correspondingly named operators, but not all of them. When they do correspond (such as in the cmp example above), this is by convention, not by enforcement. (However, matching <sym> within one of these rules instead of the literal operator makes it easier to set up this correspondence in subsequent processing.)

The STD::Regex grammar also adds these:

assertion:sym<!>                         /<!before \h>/
backslash:sym<w>                         /\w/ and /\W/
metachar:sym<.>                          /.*/
mod_internal:sym<P5>                     m:/ ... :P5 ... /
quantifier:sym<*>                        /.*/