Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
33 lines (22 sloc) 1.04 KB

The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :

  • Remove the HDD
  • Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards

File:Face_removedzz.jpg

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

  • Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
  • Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.

File:Underside3.jpg

Downside of the metal casing

File:Therm_removed.jpg

Motherboard

Category:Xbox360_Hardware