Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
1451 lines (1242 sloc) 63.8 KB
cmake_minimum_required(VERSION 3.3 FATAL_ERROR)
project(FreeCAD_trunk)
set(PACKAGE_NAME "FreeCAD")
set(PACKAGE_VERSION_NAME "Vulcan")
set(PACKAGE_VERSION_MAJOR "0")
set(PACKAGE_VERSION_MINOR "19")
set(PACKAGE_VERSION_PATCH "16100")
set(FREECAD_VERSION "${PACKAGE_VERSION_MAJOR}.${PACKAGE_VERSION_MINOR}")
set(PACKAGE_VERSION "${PACKAGE_VERSION_MAJOR}.${PACKAGE_VERSION_MINOR}.${PACKAGE_VERSION_PATCH}")
set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}")
if(COMMAND cmake_policy)
cmake_policy(SET CMP0003 NEW)
if(POLICY CMP0020)
cmake_policy(SET CMP0020 NEW)
endif(POLICY CMP0020)
# added in cmake 3.0
if(POLICY CMP0050)
cmake_policy(SET CMP0050 NEW)
endif(POLICY CMP0050)
if (POLICY CMP0045)
cmake_policy(SET CMP0045 NEW)
endif(POLICY CMP0045)
if (POLICY CMP0072)
cmake_policy(SET CMP0072 OLD)
endif(POLICY CMP0072)
endif(COMMAND cmake_policy)
find_program(CCACHE_PROGRAM ccache) #This check should occur before project()
if(CCACHE_PROGRAM)
set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
endif()
# include local modules
include(AddFileDependencies)
include(cMake/FreeCadMacros.cmake)
set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cMake")
#if(CMAKE_CFG_INTDIR STREQUAL .)
# No Debug/Release output paths
set(DEBUG_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin)
set(RELEASE_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin)
#else(CMAKE_CFG_INTDIR STREQUAL .)
# set(DEBUG_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/src/Main/Debug)
# set(RELEASE_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/src/Main/Release)
#endif(CMAKE_CFG_INTDIR STREQUAL .)
if (${CMAKE_CXX_COMPILER_ID} MATCHES "Clang")
set(CMAKE_COMPILER_IS_CLANGXX TRUE)
endif (${CMAKE_CXX_COMPILER_ID} MATCHES "Clang")
# ================================================================================
# Allow developers to use Boost < 1.48
if(NOT ${BOOST_MIN_VERSION})
set(BOOST_MIN_VERSION 1.48)
endif()
# For older cmake versions the variable 'CMAKE_CXX_COMPILER_VERSION' is missing
IF(CMAKE_COMPILER_IS_GNUCXX AND NOT CMAKE_CXX_COMPILER_VERSION)
EXECUTE_PROCESS(COMMAND ${CMAKE_C_COMPILER} -dumpversion
OUTPUT_VARIABLE CMAKE_CXX_COMPILER_VERSION)
ENDIF(CMAKE_COMPILER_IS_GNUCXX AND NOT CMAKE_CXX_COMPILER_VERSION)
# Enabled C++11 for Freecad 0.17 and later
IF(FREECAD_VERSION VERSION_GREATER 0.16)
set(BUILD_ENABLE_CXX_STD "C++11" CACHE STRING "Enable C++ standard")
set_property(CACHE BUILD_ENABLE_CXX_STD PROPERTY STRINGS
"C++11"
"C++14"
"C++17"
"C++20"
)
IF(CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7)
MESSAGE(FATAL_ERROR "FreeCAD 0.17 and later requires C++11. G++ must be 4.7 or later, the used version is ${CMAKE_CXX_COMPILER_VERSION}")
ELSEIF(CMAKE_COMPILER_IS_CLANGXX AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.3)
MESSAGE(FATAL_ERROR "FreeCAD 0.17 and later requires C++11. Clang must be 3.3 or later, the used version is ${CMAKE_CXX_COMPILER_VERSION}")
ENDIF()
ENDIF(FREECAD_VERSION VERSION_GREATER 0.16)
# Log the compiler and version
MESSAGE(STATUS "Compiler: ${CMAKE_CXX_COMPILER_ID}, version: ${CMAKE_CXX_COMPILER_VERSION}")
if(CMAKE_COMPILER_IS_GNUCXX OR CMAKE_COMPILER_IS_CLANGXX)
include(cMake/ConfigureChecks.cmake)
configure_file(config.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/config.h)
add_definitions(-DHAVE_CONFIG_H)
# Escape the two plus chars as otherwise cmake complains about invalid regex
if(${BUILD_ENABLE_CXX_STD} MATCHES "C\\+\\+20")
set(CMAKE_CXX_STANDARD 20)
elseif(${BUILD_ENABLE_CXX_STD} MATCHES "C\\+\\+17")
set(CMAKE_CXX_STANDARD 17)
elseif(${BUILD_ENABLE_CXX_STD} MATCHES "C\\+\\+14")
set(CMAKE_CXX_STANDARD 14)
elseif (${BUILD_ENABLE_CXX_STD} MATCHES "C\\+\\+11")
set(CMAKE_CXX_STANDARD 11)
endif()
set(CMAKE_CXX_FLAGS "-Wall -Wextra -Wno-write-strings ${CMAKE_CXX_FLAGS}")
INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR})
# get linker errors as soon as possible and not at runtime e.g. for modules
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,-undefined,error")
elseif(UNIX)
set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined")
endif()
endif(CMAKE_COMPILER_IS_GNUCXX OR CMAKE_COMPILER_IS_CLANGXX)
if(CMAKE_COMPILER_IS_CLANGXX)
# Disable warning about potentially uninstantiated static members
# because it leads to a lot of false-positives.
#
# https://en.wikipedia.org/wiki/Xcode#Latest_versions
if (APPLE)
if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 8.0)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-undefined-var-template")
endif()
elseif (UNIX)
if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.9)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-undefined-var-template")
endif()
endif()
# older boost.preprocessor turn off variadics for clang
add_definitions(-DBOOST_PP_VARIADICS=1)
message(STATUS "Force BOOST_PP_VARIADICS=1 for clang")
endif()
# ================================================================================
# Output directories for install target
if(WIN32)
SET(CMAKE_INSTALL_PREFIX ${CMAKE_BINARY_DIR}/install CACHE PATH "Installation root directory")
else(WIN32)
SET(CMAKE_INSTALL_PREFIX "/usr/lib${LIB_SUFFIX}/freecad" CACHE PATH "Installation root directory")
endif(WIN32)
SET(CMAKE_INSTALL_DATADIR data CACHE PATH "Output directory for data and resource files")
SET(CMAKE_INSTALL_INCLUDEDIR include CACHE PATH "Output directory for header files")
SET(CMAKE_INSTALL_DOCDIR doc CACHE PATH "Output directory for documentation and license files")
# Don't set it without manual adoption of LibDir variable in src/App/FreeCADInit.py
SET(CMAKE_INSTALL_LIBDIR lib CACHE PATH "Output directory for libraries")
if(NOT WIN32)
if(NOT IS_ABSOLUTE ${CMAKE_INSTALL_LIBDIR})
SET(CMAKE_INSTALL_LIBDIR "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
endif(NOT IS_ABSOLUTE ${CMAKE_INSTALL_LIBDIR})
endif(NOT WIN32)
SET(PYCXX_INCLUDE_DIR
"${CMAKE_SOURCE_DIR}/src" CACHE PATH
"Path to the directory containing PyCXX's CXX/Config.hxx include file")
SET(PYCXX_SOURCE_DIR
"${CMAKE_SOURCE_DIR}/src/CXX" CACHE PATH
"Path to the directory containing PyCXX's cxxextensions.c source file")
# used as compiler defines
SET(RESOURCEDIR "${CMAKE_INSTALL_DATADIR}")
SET(DOCDIR "${CMAKE_INSTALL_DOCDIR}")
MESSAGE(STATUS "prefix: ${CMAKE_INSTALL_PREFIX}")
MESSAGE(STATUS "datadir: ${CMAKE_INSTALL_DATADIR}")
MESSAGE(STATUS "docdir: ${CMAKE_INSTALL_DOCDIR}")
MESSAGE(STATUS "includedir: ${CMAKE_INSTALL_INCLUDEDIR}")
MESSAGE(STATUS "libdir: ${CMAKE_INSTALL_LIBDIR}")
MESSAGE(STATUS "cmake: ${CMAKE_VERSION}")
# ==============================================================================
# == Win32 is default behaviour use the LibPack copied in Source tree ==========
if(MSVC)
OPTION(FREECAD_RELEASE_PDB "Create PDB files for Release version." ON)
OPTION(FREECAD_RELEASE_SEH "Enable Structured Exception Handling for Release version." ON)
OPTION(FREECAD_LIBPACK_USE "Use the LibPack to Build FreeCAD (only Win32 so far)." ON)
OPTION(FREECAD_LIBPACK_USEPYSIDE "Use PySide in LibPack rather to PyQt and Swig." ON)
IF(DEFINED ENV{FREECAD_LIBPACK_DIR})
set(FREECAD_LIBPACK_DIR $ENV{FREECAD_LIBPACK_DIR} CACHE PATH "Directory of the FreeCAD LibPack")
MESSAGE(STATUS "Found libpack env variable: ${FREECAD_LIBPACK_DIR}")
IF(EXISTS ${FREECAD_LIBPACK_DIR}/lib/Qt5Core.lib)
OPTION(BUILD_QT5 "Build with Qt5." ON)
ELSE()
OPTION(BUILD_QT5 "Build with Qt5." OFF)
ENDIF()
ELSE()
set(FREECAD_LIBPACK_DIR ${CMAKE_SOURCE_DIR} CACHE PATH "Directory of the FreeCAD LibPack")
ENDIF()
OPTION(FREECAD_USE_PCH "Activate precompiled headers where it's used." ON)
else(MSVC)
OPTION(FREECAD_LIBPACK_USE "Use the LibPack to Build FreeCAD (only Win32 so far)." OFF)
set(FREECAD_LIBPACK_DIR "" CACHE PATH "Directory of the FreeCAD LibPack")
endif(MSVC)
# ==============================================================================
# == All the options for the build process ============
# Switch to build FreeCAD with Qt5
OPTION(BUILD_QT5 "Build with Qt5." OFF)
OPTION(BUILD_GUI "Build FreeCAD Gui. Otherwise you have only the command line and the Python import module." ON)
OPTION(FREECAD_USE_EXTERNAL_ZIPIOS "Use system installed zipios++ instead of the bundled." OFF)
OPTION(FREECAD_USE_EXTERNAL_SMESH "Use system installed smesh instead of the bundled." OFF)
OPTION(FREECAD_USE_EXTERNAL_KDL "Use system installed orocos-kdl instead of the bundled." OFF)
OPTION(FREECAD_USE_FREETYPE "Builds the features using FreeType libs" ON)
OPTION(FREECAD_BUILD_DEBIAN "Prepare for a build of a Debian package" OFF)
OPTION(BUILD_WITH_CONDA "Set ON if you build freecad with conda" OFF)
OPTION(OCCT_CMAKE_FALLBACK "disable usage of occt-config files" OFF)
if (WIN32 OR APPLE)
OPTION(FREECAD_USE_QT_FILEDIALOG "Use Qt's file dialog instead of the native one." OFF)
else()
OPTION(FREECAD_USE_QT_FILEDIALOG "Use Qt's file dialog instead of the native one." ON)
endif()
# https://blog.kitware.com/constraining-values-with-comboboxes-in-cmake-cmake-gui/
set(FREECAD_USE_OCC_VARIANT "Community Edition" CACHE STRING "Official OpenCASCADE version or community edition")
set_property(CACHE FREECAD_USE_OCC_VARIANT PROPERTY STRINGS
"Official Version"
"Community Edition"
)
if (BUILD_QT5)
OPTION(FREECAD_USE_QTOPENGL_WIDGET "Replace QGLWidget with QOpenGLWidget." ON)
if (FREECAD_USE_QTOPENGL_WIDGET)
set(HAVE_QT5_OPENGL 1)
endif()
set(FREECAD_USE_QTWEBMODULE "Automatic" CACHE STRING "Qt Webkit or Qt WebEngine")
set_property(CACHE FREECAD_USE_QTWEBMODULE PROPERTY STRINGS
"Automatic"
"Qt Webkit"
"Qt WebEngine"
)
endif()
configure_file(${CMAKE_SOURCE_DIR}/src/QtOpenGL.h.cmake ${CMAKE_BINARY_DIR}/src/QtOpenGL.h)
if(APPLE)
OPTION(FREECAD_CREATE_MAC_APP "Create app bundle on install" OFF)
if(FREECAD_CREATE_MAC_APP)
install(
DIRECTORY ${CMAKE_SOURCE_DIR}/src/MacAppBundle/FreeCAD.app/
DESTINATION ${CMAKE_INSTALL_PREFIX}/${PACKAGE_NAME}.app
)
# It should be safe to assume we've got sed on OSX...
install(CODE "
execute_process(COMMAND
sed -i \"\" -e s/VERSION_STRING_FROM_CMAKE/${PACKAGE_VERSION}/
-e s/NAME_STRING_FROM_CMAKE/${PACKAGE_NAME}/
${CMAKE_INSTALL_PREFIX}/${PACKAGE_NAME}.app/Contents/Info.plist)
")
set(CMAKE_INSTALL_PREFIX
${CMAKE_INSTALL_PREFIX}/${PACKAGE_NAME}.app/Contents)
set(CMAKE_INSTALL_LIBDIR ${CMAKE_INSTALL_PREFIX}/lib)
endif(FREECAD_CREATE_MAC_APP)
set(CMAKE_MACOSX_RPATH TRUE)
endif(APPLE)
OPTION(BUILD_FEM "Build the FreeCAD FEM module" ON)
OPTION(BUILD_SANDBOX "Build the FreeCAD Sandbox module which is only for testing purposes" OFF)
OPTION(BUILD_TEMPLATE "Build the FreeCAD template module which is only for testing purposes" OFF)
OPTION(BUILD_ADDONMGR "Build the FreeCAD addon manager module" ON)
OPTION(BUILD_ARCH "Build the FreeCAD Architecture module" ON)
OPTION(BUILD_ASSEMBLY "Build the FreeCAD Assembly module" OFF)
OPTION(BUILD_COMPLETE "Build the FreeCAD complete module" ON)
OPTION(BUILD_DRAFT "Build the FreeCAD draft module" ON)
OPTION(BUILD_DRAWING "Build the FreeCAD drawing module" ON)
OPTION(BUILD_IDF "Build the FreeCAD idf module" ON)
OPTION(BUILD_IMAGE "Build the FreeCAD image module" ON)
OPTION(BUILD_IMPORT "Build the FreeCAD import module" ON)
OPTION(BUILD_INSPECTION "Build the FreeCAD inspection module" ON)
OPTION(BUILD_JTREADER "Build the FreeCAD jt reader module" OFF)
OPTION(BUILD_MATERIAL "Build the FreeCAD material module" ON)
OPTION(BUILD_MESH "Build the FreeCAD mesh module" ON)
OPTION(BUILD_MESH_PART "Build the FreeCAD mesh part module" ON)
OPTION(BUILD_FLAT_MESH "Build the FreeCAD flat mesh module" OFF)
OPTION(BUILD_OPENSCAD "Build the FreeCAD openscad module" ON)
OPTION(BUILD_PART "Build the FreeCAD part module" ON)
OPTION(BUILD_PART_DESIGN "Build the FreeCAD part design module" ON)
OPTION(BUILD_PATH "Build the FreeCAD path module" ON)
OPTION(BUILD_PLOT "Build the FreeCAD plot module" ON)
OPTION(BUILD_POINTS "Build the FreeCAD points module" ON)
OPTION(BUILD_RAYTRACING "Build the FreeCAD ray tracing module" ON)
OPTION(BUILD_REVERSEENGINEERING "Build the FreeCAD reverse engineering module" ON)
OPTION(BUILD_ROBOT "Build the FreeCAD robot module" ON)
OPTION(BUILD_SHIP "Build the FreeCAD ship module" ON)
OPTION(BUILD_SHOW "Build the FreeCAD Show module (helper module for visibility automation)" ON)
OPTION(BUILD_SKETCHER "Build the FreeCAD sketcher module" ON)
OPTION(BUILD_SPREADSHEET "Build the FreeCAD spreadsheet module" ON)
OPTION(BUILD_START "Build the FreeCAD start module" ON)
OPTION(BUILD_TEST "Build the FreeCAD test module" ON)
OPTION(BUILD_TECHDRAW "Build the FreeCAD Technical Drawing module" ON)
OPTION(BUILD_TUX "Build the FreeCAD Tux module" ON)
OPTION(BUILD_WEB "Build the FreeCAD web module" ON)
OPTION(BUILD_SURFACE "Build the FreeCAD surface module" ON)
OPTION(BUILD_VR "Build the FreeCAD Oculus Rift support (need Oculus SDK 4.x or higher)" OFF)
if(MSVC)
OPTION(BUILD_FEM_NETGEN "Build the FreeCAD FEM module with the NETGEN mesher" ON)
OPTION(FREECAD_USE_3DCONNEXION "Use the 3D connexion SDK to support 3d mouse." ON)
elseif(APPLE)
find_library(3DCONNEXIONCLIENT_FRAMEWORK 3DconnexionClient)
if(IS_DIRECTORY ${3DCONNEXIONCLIENT_FRAMEWORK})
OPTION(FREECAD_USE_3DCONNEXION "Use the 3D connexion SDK to support 3d mouse." ON)
else(IS_DIRECTORY ${3DCONNEXIONCLIENT_FRAMEWORK})
OPTION(FREECAD_USE_3DCONNEXION "Use the 3D connexion SDK to support 3d mouse." OFF)
endif(IS_DIRECTORY ${3DCONNEXIONCLIENT_FRAMEWORK})
else(MSVC)
set(FREECAD_USE_3DCONNEXION OFF)
endif(MSVC)
if(NOT MSVC)
OPTION(BUILD_FEM_NETGEN "Build the FreeCAD FEM module with the NETGEN mesher" OFF)
OPTION(FREECAD_USE_PCL "Build the features that use PCL libs" OFF)
endif(NOT MSVC)
# if this is set override some options
if (FREECAD_BUILD_DEBIAN)
set(FREECAD_USE_EXTERNAL_ZIPIOS ON)
# A Debian package for SMESH doesn't exist
#set(FREECAD_USE_EXTERNAL_SMESH ON)
endif (FREECAD_BUILD_DEBIAN)
if(BUILD_FEM)
set(BUILD_SMESH ON)
endif()
# for Windows the minimum required cmake version is 3.4.3 to build the Path module
if(WIN32 AND CMAKE_VERSION VERSION_LESS 3.4.3)
message(WARNING "Disable Path, requires cmake >= 3.4.3 in order to build this module")
set(BUILD_PATH OFF)
endif()
# ==============================================================================
#inter-module dependencies
# Takes a dependent module followed by a variable-length list of prerequisite
# modules. Warns if any of the prerequisite modules are disabled.
function(REQUIRES_MODS dependent)
if(${dependent})
foreach(prerequisite ${ARGN})
if(NOT ${prerequisite})
message(WARNING
"${dependent} requires ${ARGN} each be ON, but "
"${prerequisite} is \"${${prerequisite}}\"")
endif(NOT ${prerequisite})
endforeach()
endif(${dependent})
endfunction(REQUIRES_MODS)
REQUIRES_MODS(BUILD_ARCH BUILD_PART BUILD_MESH BUILD_DRAFT)
REQUIRES_MODS(BUILD_DRAFT BUILD_SKETCHER)
REQUIRES_MODS(BUILD_DRAWING BUILD_PART BUILD_SPREADSHEET)
REQUIRES_MODS(BUILD_FEM BUILD_PART)
REQUIRES_MODS(BUILD_IDF BUILD_PART)
REQUIRES_MODS(BUILD_IMPORT BUILD_PART)
REQUIRES_MODS(BUILD_INSPECTION BUILD_MESH BUILD_POINTS BUILD_PART)
REQUIRES_MODS(BUILD_JTREADER BUILD_MESH)
REQUIRES_MODS(BUILD_MESH_PART BUILD_PART BUILD_MESH BUILD_SMESH)
REQUIRES_MODS(BUILD_FLAT_MESH BUILD_MESH_PART)
REQUIRES_MODS(BUILD_OPENSCAD BUILD_MESH_PART BUILD_DRAFT)
REQUIRES_MODS(BUILD_PART_DESIGN BUILD_SKETCHER)
REQUIRES_MODS(BUILD_PATH BUILD_PART BUILD_ROBOT)
REQUIRES_MODS(BUILD_RAYTRACING BUILD_PART)
REQUIRES_MODS(BUILD_REVERSEENGINEERING BUILD_PART BUILD_MESH)
REQUIRES_MODS(BUILD_ROBOT BUILD_PART)
REQUIRES_MODS(BUILD_SANDBOX BUILD_PART BUILD_MESH)
REQUIRES_MODS(BUILD_SHIP BUILD_PART BUILD_PLOT BUILD_IMAGE)
REQUIRES_MODS(BUILD_SKETCHER BUILD_PART)
REQUIRES_MODS(BUILD_SPREADSHEET BUILD_DRAFT)
REQUIRES_MODS(BUILD_START BUILD_WEB)
REQUIRES_MODS(BUILD_TECHDRAW BUILD_PART BUILD_SPREADSHEET BUILD_DRAWING)
# ==============================================================================
if(FREECAD_LIBPACK_USE)
# checking for a unique file in LibPack location to make sure the right version of the LibPack is there
find_file(FREECAD_LIBPACK_CHECKFILE6X boost_program_options-vc80-mt-gd.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKFILE7X boost_program_options-vc90-mt-gd-1_39.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKFILE8X boost_program_options-vc90-mt-gd-1_48.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKFILE9X boost_program_options-vc90-mt-gd-1_54.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKFILE10X boost_program_options-vc110-mt-1_55.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKCUSTOM boost_program_options-vc90-mt-gd-1_41.lib ${FREECAD_LIBPACK_DIR}/lib )
find_file(FREECAD_LIBPACK_CHECKFILE_CLBUNDLER MANIFEST.db ${FREECAD_LIBPACK_DIR})
# don't show them in the GUI
set(FREECAD_LIBPACK_CHECKFILE6X "${FREECAD_LIBPACK_CHECKFILE6X}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKFILE7X "${FREECAD_LIBPACK_CHECKFILE7X}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKFILE8X "${FREECAD_LIBPACK_CHECKFILE8X}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKFILE9X "${FREECAD_LIBPACK_CHECKFILE9X}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKFILE10X "${FREECAD_LIBPACK_CHECKFILE10X}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKCUSTOM "${FREECAD_LIBPACK_CHECKCUSTOM}" CACHE INTERNAL "Find libpack")
set(FREECAD_LIBPACK_CHECKFILE_CLBUNDLER "${FREECAD_LIBPACK_CHECKFILE_CLBUNDLER}" CACHE INTERNAL "Find libpack")
IF(FREECAD_LIBPACK_CHECKFILE_CLBUNDLER)
set(FREECAD_LIBPACK_VERSION "CLbundler" CACHE STRING "Displays if the libpack has been found" FORCE)
include(cMake/UseLibPackCLbundler.cmake)
ELSEIF(FREECAD_LIBPACK_CHECKFILE9X)
set(FREECAD_LIBPACK_VERSION "9.x" CACHE STRING "Displays if the libpack has been found" FORCE)
include(cMake/UseLibPack9x.cmake)
set(SWIG_EXECUTABLE ${FREECAD_LIBPACK_DIR}/tools/swigwin-2.0.11/swig.exe CACHE STRING "Swig" FORCE)
set(FREECAD_LIBPACK_PYSIDEUIC_REL "${FREECAD_LIBPACK_DIR}/pyside-tools/Lib/site-packages")
file(GLOB FREECAD_LIBPACK_PIVY_COIN "${FREECAD_LIBPACK_DIR}/pivy/*.*")
file(GLOB FREECAD_LIBPACK_SHIBOKEN "${FREECAD_LIBPACK_DIR}/shiboken-1.2.1/lib/site-packages/*.pyd")
file(GLOB FREECAD_LIBPACK_PYSIDE "${FREECAD_LIBPACK_DIR}/pyside/lib/site-packages/PySide/*.py*")
file(GLOB_RECURSE FREECAD_LIBPACK_PYSIDEUIC RELATIVE "${FREECAD_LIBPACK_PYSIDEUIC_REL}" "${FREECAD_LIBPACK_PYSIDEUIC_REL}/pysideuic/*.py")
file(GLOB FREECAD_LIBPACK_PYTHON "${FREECAD_LIBPACK_DIR}/bin/*.py*")
ELSEIF(FREECAD_LIBPACK_CHECKFILE10X)
set(FREECAD_LIBPACK_VERSION "10.x" CACHE STRING "Displays if the libpack has been found" FORCE)
include(cMake/UseLibPack10x.cmake)
set(SWIG_EXECUTABLE ${FREECAD_LIBPACK_DIR}/tools/swigwin-3.0.2/swig.exe CACHE STRING "Swig" FORCE)
ELSEIF(FREECAD_LIBPACK_CHECKCUSTOM)
set(FREECAD_LIBPACK_VERSION "Custom" CACHE STRING "Displays if the libpack has been found" FORCE)
include(cMake/UseLibPackCustom.cmake)
ELSE(FREECAD_LIBPACK_CHECKFILE_CLBUNDLER)
set(FREECAD_LIBPACK_VERSION "NOTFOUND" CACHE STRING "Displays if the libpack has been found" FORCE)
message(SEND_ERROR "Could not find libpack in specified location:" ${FREECAD_LIBPACK_DIR})
ENDIF(FREECAD_LIBPACK_CHECKFILE_CLBUNDLER)
# -------------------------------- PyCXX --------------------------------
find_package(PyCXX REQUIRED)
# -------------------------------- Swig ----------------------------------
find_package(SWIG)
IF(NOT SWIG_FOUND)
MESSAGE("==================================================\n"
"SWIG not found, don't build SWIG binding for pivy.\n"
"==================================================\n")
ENDIF(NOT SWIG_FOUND)
# -------------------------------- Salome SMESH --------------------------
if(NOT FREECAD_USE_EXTERNAL_SMESH)
set(SMESH_INCLUDE_DIR ${CMAKE_SOURCE_DIR}/src/3rdParty/salomesmesh/inc)
endif()
endif(FREECAD_LIBPACK_USE)
if(NOT FREECAD_LIBPACK_USE OR FREECAD_LIBPACK_CHECKFILE_CLBUNDLER)
# ================================================================================
# == for other OSes search the packages ==========================================
# -------------------------------- Python --------------------------------
# http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677598
# Acceptable versions of Python
set(Python_ADDITIONAL_VERSIONS "2.7")
# For building on OS X
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin" AND NOT BUILD_WITH_CONDA)
# If the user doesn't tell us which package manager they're using
if(NOT DEFINED MACPORTS_PREFIX AND NOT DEFINED HOMEBREW_PREFIX)
# Try to find MacPorts path
find_program(MACPORTS_EXECUTABLE port)
if(EXISTS ${MACPORTS_EXECUTABLE})
string(REPLACE "/bin/port" ""
MACPORTS_PREFIX ${MACPORTS_EXECUTABLE})
message(STATUS "Detected MacPorts install at ${MACPORTS_PREFIX}")
endif(EXISTS ${MACPORTS_EXECUTABLE})
# Try to find Homebrew path
find_program(HOMEBREW_EXECUTABLE brew)
if(EXISTS ${HOMEBREW_EXECUTABLE})
string(REPLACE "/bin/brew" ""
HOMEBREW_PREFIX ${HOMEBREW_EXECUTABLE})
message(STATUS "Detected Homebrew install at ${HOMEBREW_PREFIX}")
endif()
endif(NOT DEFINED MACPORTS_PREFIX AND NOT DEFINED HOMEBREW_PREFIX)
# In case someone tries to shoot themselves in the foot
if(DEFINED MACPORTS_PREFIX AND DEFINED HOMEBREW_PREFIX)
message(SEND_ERROR
"Multiple package management systems detected - ")
message(SEND_ERROR
"define either MACPORTS_PREFIX or HOMEBREW_PREFIX")
# No package manager
elseif(NOT DEFINED MACPORTS_PREFIX AND NOT DEFINED HOMEBREW_PREFIX)
message(SEND_ERROR
"No package manager detected - install MacPorts or Homebrew")
# The hopefully-normal case - one package manager identified
else(DEFINED MACPORTS_PREFIX AND DEFINED HOMEBREW_PREFIX)
# Construct a list like python;python2.9;python2.8;...
set(Python_ADDITIONAL_VERSIONS_REV ${Python_ADDITIONAL_VERSIONS})
list(REVERSE Python_ADDITIONAL_VERSIONS_REV)
set(_PYTHON_NAMES "python")
foreach(_PYTHON_VERSION IN LISTS Python_ADDITIONAL_VERSIONS_REV)
list(APPEND _PYTHON_NAMES "python${_PYTHON_VERSION}")
endforeach(_PYTHON_VERSION)
# Find python in the package management systems, using names in that
# list in decreasing priority. Note that a manually specified
# PYTHON_EXECUTABLE still has prescedence over this.
find_program(PYTHON_EXECUTABLE
NAMES ${_PYTHON_NAMES}
PATHS ${MACPORTS_PREFIX} ${HOMEBREW_PREFIX}
PATH_SUFFIXES /bin
NO_DEFAULT_PATH)
endif(DEFINED MACPORTS_PREFIX AND DEFINED HOMEBREW_PREFIX)
# Warn user if we still only have the system Python
string(FIND ${PYTHON_EXECUTABLE} "/usr/bin/python" _FIND_SYS_PYTHON)
if(_FIND_SYS_PYTHON EQUAL 0)
message(SEND_ERROR
"Only found the stock Python, that's probably bad.")
endif(_FIND_SYS_PYTHON EQUAL 0)
# Ask Python to tell us it's include directory, if nobody else has
if(NOT DEFINED PYTHON_INCLUDE_DIR)
execute_process(COMMAND ${PYTHON_EXECUTABLE} -c
"from distutils.sysconfig import get_python_inc;print get_python_inc()"
OUTPUT_VARIABLE PYTHON_INCLUDE_DIR
RESULT_VARIABLE PYTHON_INCLUDE_DIR_RESULT
ERROR_QUIET)
if(NOT PYTHON_INCLUDE_DIR_RESULT MATCHES 0)
message(SEND_ERROR "Failed to determine PYTHON_INCLUDE_DIR")
endif(NOT PYTHON_INCLUDE_DIR_RESULT MATCHES 0)
endif(NOT DEFINED PYTHON_INCLUDE_DIR)
# Similar for the Python library - there must be an easier way...
if(NOT DEFINED PYTHON_LIBRARY)
# Get the library path
execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c
"from distutils import sysconfig;print sysconfig.get_config_var('LIBDIR')"
OUTPUT_VARIABLE PYTHON_LIBRARY_DIR
RESULT_VARIABLE PYTHON_LIBRARY_DIR_RESULT
ERROR_QUIET)
string(STRIP ${PYTHON_LIBRARY_DIR} PYTHON_LIBRARY_DIR)
if(NOT PYTHON_LIBRARY_DIR_RESULT MATCHES 0)
message(SEND_ERROR "Failed to determine PYTHON_LIBRARY")
endif(NOT PYTHON_LIBRARY_DIR_RESULT MATCHES 0)
# Get library filename - might not be safe to assume .dylib extension?
execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c
"import sys;print 'libpython%d.%d.dylib'%sys.version_info[0:2]"
OUTPUT_VARIABLE PYTHON_LIBRARY_FILE
RESULT_VARIABLE PYTHON_LIBRARY_FILE_RESULT
ERROR_QUIET)
string(STRIP ${PYTHON_LIBRARY_FILE} PYTHON_LIBRARY_FILE)
if(NOT PYTHON_LIBRARY_FILE_RESULT MATCHES 0)
message(SEND_ERROR "Failed to determine PYTHON_LIBRARY")
endif(NOT PYTHON_LIBRARY_FILE_RESULT MATCHES 0)
set(PYTHON_LIBRARY "${PYTHON_LIBRARY_DIR}/${PYTHON_LIBRARY_FILE}")
else(NOT DEFINED PYTHON_LIBRARY)
# Used on MacPorts systems for finding Shiboken and PySide
# TODO: When we start requiring minimum CMake version above
# 2.8.11, change PATH below to DIRECTORY
get_filename_component(PYTHON_LIBRARY_DIR ${PYTHON_LIBRARY} PATH)
endif(NOT DEFINED PYTHON_LIBRARY)
endif(${CMAKE_SYSTEM_NAME} MATCHES "Darwin" AND NOT BUILD_WITH_CONDA)
find_package(PythonInterp REQUIRED)
set(Python_ADDITIONAL_VERSIONS ${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
IF (NOT DEFINED PYTHON_VERSION_STRING)
find_package(PythonLibs REQUIRED)
ELSE (NOT DEFINED PYTHON_VERSION_STRING)
find_package(PythonLibs ${PYTHON_VERSION_STRING} EXACT)
ENDIF(NOT DEFINED PYTHON_VERSION_STRING)
IF(NOT PYTHONLIBS_FOUND)
MESSAGE(FATAL_ERROR "=================================\n"
"Python not found, install Python!\n"
"=================================\n")
ELSE(NOT PYTHONLIBS_FOUND)
# prevent python3 lower than 3.3 (not enough utf8<->unicode tools)
IF(PYTHON_VERSION_MAJOR EQUAL 3)
IF(PYTHON_VERSION_MINOR LESS 4)
MESSAGE(FATAL_ERROR "To build FreeCAD with Python3, you need at least version 3.4\n")
ENDIF(PYTHON_VERSION_MINOR LESS 4)
ENDIF(PYTHON_VERSION_MAJOR EQUAL 3)
ENDIF(NOT PYTHONLIBS_FOUND)
# -------------------------------- pcl ----------------------------------
# Can be used by ReverseEngineering module"
#
# PCL needs to be found before boost because the PCLConfig also calls find_package(Boost ...),
# but with different components
if(FREECAD_USE_PCL)
find_package(PCL REQUIRED COMPONENTS common kdtree features surface io filters segmentation sample_consensus)
endif(FREECAD_USE_PCL)
# -------------------------------- PyBind11 -----------------------------
# necessary for flat-mesh feature
OPTION(FREECAD_USE_PYBIND11 "Use pybind11" OFF)
if (FREECAD_USE_PYBIND11)
find_package(pybind11 REQUIRED)
endif()
# -------------------------------- Boost --------------------------------
SET(_boost_TEST_VERSIONS ${Boost_ADDITIONAL_VERSIONS})
set (BOOST_COMPONENTS filesystem program_options regex system thread)
find_package(Boost ${BOOST_MIN_VERSION}
COMPONENTS ${BOOST_COMPONENTS} REQUIRED)
if(UNIX AND NOT APPLE)
# Boost.Thread 1.67+ headers reference pthread_condattr_*
list(APPEND Boost_LIBRARIES pthread)
endif()
IF(NOT Boost_FOUND)
set (NO_BOOST_COMPONENTS)
foreach (comp ${BOOST_COMPONENTS})
string(TOUPPER ${comp} uppercomp)
if (NOT Boost_${uppercomp}_FOUND)
list(APPEND NO_BOOST_COMPONENTS ${comp})
endif()
endforeach()
MESSAGE(FATAL_ERROR "=============================================\n"
"Required components:\n"
" ${BOOST_COMPONENTS}\n"
"Not found, install the components:\n"
" ${NO_BOOST_COMPONENTS}\n"
"=============================================\n")
ENDIF(NOT Boost_FOUND)
# -------------------------------- XercesC --------------------------------
find_package(XercesC REQUIRED)
IF(NOT XercesC_FOUND)
MESSAGE(FATAL_ERROR "==================\n"
"XercesC not found.\n"
"==================\n")
ENDIF(NOT XercesC_FOUND)
# -------------------------------- ZLIB --------------------------------
find_package(ZLIB REQUIRED)
# -------------------------------- PyCXX --------------------------------
find_package(PyCXX REQUIRED)
# -------------------------------- OpenCasCade --------------------------------
find_package(OpenCasCade)
IF(NOT OCC_FOUND)
MESSAGE(FATAL_ERROR "================================================================\n"
"Neither OpenCASCADE Community Edition nor OpenCASCADE was found!\n"
"================================================================\n")
ENDIF(NOT OCC_FOUND)
# -------------------------------- Salome SMESH --------------------------
# Salome SMESH sources are under src/3rdParty now
IF(BUILD_SMESH)
# set the internal smesh version:
# see src/3rdParty/salomonemesh/CMakeLists.txt and commit https://github.com/FreeCAD/FreeCAD/commit/666a3e5 and https://forum.freecadweb.org/viewtopic.php?f=10&t=30838
set(SMESH_VERSION_MAJOR 7)
set(SMESH_VERSION_MINOR 7)
set(SMESH_VERSION_PATCH 1)
set(SMESH_VERSION_TWEAK 0)
#if we use smesh we definitely also need vtk, no matter of external or internal smesh
set (VTK_COMPONENTS
vtkCommonCore
vtkCommonDataModel
vtkFiltersVerdict
vtkIOXML
vtkFiltersCore
vtkFiltersGeneral
vtkIOLegacy
vtkFiltersExtraction
vtkFiltersSources
vtkFiltersGeometry
)
# check which modules are available
if(UNIX OR WIN32)
find_package(VTK COMPONENTS vtkCommonCore REQUIRED NO_MODULE)
list(APPEND VTK_COMPONENTS vtkIOMPIParallel vtkParallelMPI vtkhdf5 vtkFiltersParallelDIY2 vtkRenderingCore vtkInteractionStyle vtkRenderingFreeType vtkRenderingOpenGL2)
foreach(_module ${VTK_COMPONENTS})
list (FIND VTK_MODULES_ENABLED ${_module} _index)
if (${_index} GREATER -1)
list(APPEND AVAILABLE_VTK_COMPONENTS ${_module})
endif()
endforeach()
endif()
# don't check VERSION 6 as this would exclude VERSION 7
if(AVAILABLE_VTK_COMPONENTS)
message(STATUS "VTK components: ${AVAILABLE_VTK_COMPONENTS}")
find_package(VTK COMPONENTS ${AVAILABLE_VTK_COMPONENTS} REQUIRED NO_MODULE)
else()
message(STATUS "VTK components: not found or used")
find_package(VTK REQUIRED NO_MODULE)
endif()
set(BUILD_FEM_VTK ON)
if(${VTK_MAJOR_VERSION} LESS 6)
message( FATAL_ERROR "Found VTK version is <6, this is not compatible" )
endif()
if(${VTK_MAJOR_VERSION} EQUAL 6)
if(${VTK_MINOR_VERSION} LESS 2)
set(VTK_OPTIONS -DVTK_NO_QUAD_POLY)
endif()
if(${VTK_MINOR_VERSION} EQUAL 0)
message(WARNING "VTK equal to 6.0 cannot be used with c++11, FEM postprocessing is disabled")
set(BUILD_FEM_VTK OFF)
endif()
endif()
# on openSUSE 13.1 VTK_LIBRARIES ends with "optimized" keyword
list(REMOVE_ITEM VTK_LIBRARIES "optimized" "debug")
if(NOT FREECAD_USE_EXTERNAL_SMESH)
find_package(MEDFile REQUIRED)
# See https://www.hdfgroup.org/HDF5/release/cmakebuild.html
if (WIN32)
find_package(HDF5 COMPONENTS NO_MODULE REQUIRED static)
else()
find_package(PkgConfig)
FILE(READ ${meddotH} TMPTXT)
STRING(FIND "${TMPTXT}" "#define MED_HAVE_MPI" matchres)
if(${matchres} EQUAL -1)
message(STATUS "We guess that libmed was built using hdf5-serial version")
set(HDF5_VARIANT "hdf5-serial")
else()
message(STATUS "We guess that libmed was built using hdf5-openmpi version")
set(HDF5_VARIANT "hdf5-openmpi")
set(HDF5_PREFER_PARALLEL TRUE) # if pkg-config fails, find_package(HDF5) needs this
endif()
pkg_search_module(HDF5 ${HDF5_VARIANT})
if(NOT HDF5_FOUND)
find_package(HDF5 REQUIRED)
else()
add_compile_options(${HDF5_CFLAGS})
link_directories(${HDF5_LIBRARY_DIRS})
link_libraries(${HDF5_LIBRARIES})
find_file(Hdf5dotH hdf5.h PATHS ${HDF5_INCLUDE_DIRS} NO_DEFAULT_PATH)
if(NOT Hdf5dotH)
message( FATAL_ERROR "${HDF5_VARIANT} development header not found.")
endif()
endif()
check_include_file_cxx(hdf5.h HDF5_FOUND)
if(NOT HDF5_FOUND)
message( FATAL_ERROR "hdf5.h was not found.")
endif()
# Med Fichier can require MPI
pkg_search_module(OPENMPI ompi-cxx)
add_compile_options(${OPENMPI_CFLAGS})
link_directories(${OPENMPI_LIBRARY_DIRS})
link_libraries(${OPENMPI_LIBRARIES})
find_file(MpidotH mpi.h PATHS ${OPENMPI_INCLUDE_DIRS} NO_DEFAULT_PATH)
if(NOT MpidotH)
message( WARNING "mpi.h was not found. Check for error above.")
endif()
endif()
set(SMESH_INCLUDE_DIR ${CMAKE_SOURCE_DIR}/src/3rdParty/salomesmesh/inc)
else(NOT FREECAD_USE_EXTERNAL_SMESH)
find_package(SMESH CONFIG)
set (SMESH_INCLUDE_DIR ${SMESH_INCLUDE_PATH})
SET(EXTERNAL_SMESH_LIBS ${SMESH_LIBRARIES})
if(NOT SMESH_FOUND)
message(ERROR "================\n"
"SMESH not found.\n"
"================\n")
endif()
include_directories(${SMESH_INCLUDE_DIR})
endif()
set(SMESH_FOUND TRUE)
configure_file(SMESH_Version.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/SMESH_Version.h)
ENDIF(BUILD_SMESH)
# -------------------------------- Netgen --------------------------------
if (BUILD_FEM_NETGEN)
find_package(NETGEN)
endif(BUILD_FEM_NETGEN)
# -------------------------------- OpenCV --------------------------------
# not needed at the moment
#find_package(OpenCV REQUIRED)
# -------------------------------- Swig ----------------------------------
find_package(SWIG)
IF(NOT SWIG_FOUND)
MESSAGE("=====================================================\n"
"SWIG not found, will not build SWIG binding for pivy.\n"
"=====================================================\n")
ENDIF(NOT SWIG_FOUND)
# -------------------------------- Eigen --------------------------------
# necessary for Sketcher module
# necessary for Robot module
find_package(Eigen3)
IF(NOT EIGEN3_FOUND)
MESSAGE("=================\n"
"Eigen3 not found.\n"
"=================\n")
ENDIF(NOT EIGEN3_FOUND)
if (${EIGEN3_VERSION} VERSION_LESS "3.3.1")
message(WARNING "Disable module flatmesh because it requires "
"minimum Eigen3 version 3.3.1 but version ${EIGEN3_VERSION} was found")
set (BUILD_FLAT_MESH OFF)
endif()
# -------------------------------- Qt --------------------------------
if (NOT BUILD_QT5)
# If using MacPorts, help the Qt4 finder.
if(MACPORTS_PREFIX)
if(NOT QT_QMAKE_EXECUTABLE)
set(QT_QMAKE_EXECUTABLE ${MACPORTS_PREFIX}/libexec/qt4/bin/qmake)
endif()
endif()
SET(QT_MIN_VERSION 4.5.0)
set(QT_USE_QTNETWORK TRUE)
set(QT_USE_QTXML TRUE)
if(BUILD_GUI)
set(QT_USE_QTOPENGL TRUE)
set(QT_USE_QTSVG TRUE)
set(QT_USE_QTUITOOLS TRUE)
set(QT_USE_QTWEBKIT TRUE)
endif(BUILD_GUI)
find_package(Qt4)# REQUIRED
include(${QT_USE_FILE})
IF(NOT QT4_FOUND)
MESSAGE(FATAL_ERROR "========================\n"
"Qt4 libraries not found.\n"
"========================\n")
ENDIF(NOT QT4_FOUND)
IF(NOT QT_QTWEBKIT_FOUND)
MESSAGE("========================================================\n"
"Qt Webkit not found, will not build browser integration.\n"
"========================================================\n")
ENDIF(NOT QT_QTWEBKIT_FOUND)
# This is a special version of the built in macro qt4_wrap_cpp
# It is required since moc'ed files are now included instead of being added to projects directly
# It adds a reverse dependency to solve this
# This has the unfortunate side effect that some files are always rebuilt
# There is probably a cleaner solution than this
macro(fc_wrap_cpp outfiles)
# get include dirs
QT4_GET_MOC_FLAGS(moc_flags)
QT4_EXTRACT_OPTIONS(moc_files moc_options moc_target ${ARGN})
# fixes bug 0000585: bug with boost 1.48
SET(moc_options ${moc_options} -DBOOST_TT_HAS_OPERATOR_HPP_INCLUDED)
foreach(it ${moc_files})
get_filename_component(it ${it} ABSOLUTE)
QT4_MAKE_OUTPUT_FILE(${it} moc_ cpp outfile)
ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
COMMAND ${QT_MOC_EXECUTABLE}
ARGS ${moc_options} ${it} -o ${outfile}
MAIN_DEPENDENCY ${it}
)
set(${outfiles} ${${outfiles}} ${outfile})
add_file_dependencies(${it} ${outfile})
endforeach(it)
endmacro(fc_wrap_cpp)
elseif (BUILD_QT5)
find_package(Qt5Core REQUIRED)
find_package(Qt5Network REQUIRED)
find_package(Qt5Xml REQUIRED)
if(BUILD_GUI)
find_package(Qt5Widgets REQUIRED)
find_package(Qt5PrintSupport REQUIRED)
find_package(Qt5OpenGL REQUIRED)
find_package(Qt5Svg REQUIRED)
find_package(Qt5UiTools REQUIRED)
find_package(Qt5Concurrent REQUIRED)
if (BUILD_WEB)
if (${FREECAD_USE_QTWEBMODULE} MATCHES "Qt Webkit")
find_package(Qt5WebKitWidgets REQUIRED)
elseif(${FREECAD_USE_QTWEBMODULE} MATCHES "Qt WebEngine")
find_package(Qt5WebEngineWidgets REQUIRED)
if (Qt5WebEngineWidgets_VERSION VERSION_LESS 5.7.0)
message(FATAL_ERROR "** Minimum supported Qt5WebEngine version is 5.7.0!\n")
endif()
else() # Automatic
find_package(Qt5WebKitWidgets QUIET)
if(NOT Qt5WebKitWidgets_FOUND)
find_package(Qt5WebEngineWidgets REQUIRED)
if (Qt5WebEngineWidgets_VERSION VERSION_LESS 5.7.0)
message(FATAL_ERROR "** Minimum supported Qt5WebEngine version is 5.7.0!\n")
endif()
endif()
endif()
endif()
endif(BUILD_GUI)
# This is a special version of the built in macro qt5_wrap_cpp
# It is required since moc'ed files are now included instead of being added to projects directly
# It adds a reverse dependency to solve this
# This has the unfortunate side effect that some files are always rebuilt
# There is probably a cleaner solution than this
macro(fc_wrap_cpp outfiles )
# get include dirs
qt5_get_moc_flags(moc_flags)
set(moc_files ${ARGN})
# fixes bug 0000585: bug with boost 1.48
set(moc_options ${moc_options} -DBOOST_TT_HAS_OPERATOR_HPP_INCLUDED)
foreach(it ${moc_files})
get_filename_component(it ${it} ABSOLUTE)
qt5_make_output_file(${it} moc_ cpp outfile)
qt5_create_moc_command(${it} ${outfile} "${moc_flags}" "${moc_options}" "${moc_target}" "${moc_depends}")
set(${outfiles} ${${outfiles}} ${outfile})
add_file_dependencies(${it} ${outfile})
endforeach(it)
endmacro(fc_wrap_cpp)
endif (NOT BUILD_QT5)
#--------------------FreeType-----------------------
if(FREECAD_USE_FREETYPE)
find_package(Freetype)
if(NOT FREETYPE_FOUND)
MESSAGE("===============================================================\n"
"FreeType2 not found. Part module will lack of makeWireString().\n"
"===============================================================\n")
endif(NOT FREETYPE_FOUND)
endif(FREECAD_USE_FREETYPE)
#---------------------------------------------------
if(BUILD_GUI)
# -------------------------------- OpenGL --------------------------------
find_package(OpenGL)
include(FindPackageMessage)
if(OPENGL_GLU_FOUND)
find_package_message(OPENGL_GLU
"Found OpenGLU: ${OPENGL_glu_LIBRARY}"
"[${OPENGL_glu_LIBRARY}][${OPENGL_INCLUDE_DIR}]")
else(OPENGL_GLU_FOUND)
message(FATAL_ERROR "======================\n"
"GLU library not found.\n"
"======================\n")
endif(OPENGL_GLU_FOUND)
# -------------------------------- Coin3D --------------------------------
find_package(Coin3D REQUIRED)
if(NOT COIN3D_FOUND)
MESSAGE(FATAL_ERROR "=================\n"
"Coin3D not found.\n"
"=================\n")
endif(NOT COIN3D_FOUND)
# ------------------------------ Spaceball -------------------------------
if (WIN32)
#future
else(WIN32)
find_package(Spnav)
endif(WIN32)
# -------------------------------- Shiboken/PySide ------------------------
if(BUILD_QT5)
# set(PYTHON_SUFFIX -python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
# Below are two variables that can be left empty for standard python 3 version,
# but must be set by the user for different python versions such as 2.7, 3.5 ...
if (PYTHON_VERSION_MAJOR LESS 3)
SET(PYTHON_CONFIG_SUFFIX -python2.7 CACHE STRING "Shiboken cmake file suffix. If left empty, system default will be used: <ShibokenConfigPYTHON_CONFIG_SUFFIX.cmake>")
SET(PYTHON_BASENAME -python2.7 CACHE STRING "Same as PYTHON_SUFFIX but for PySide. If left empty, PYTHON_SUFFIX will be used: <PySideConfigPYTHON_BASENAME.cmake>")
else()
#SET(PYTHON_CONFIG_SUFFIX "" CACHE STRING "Shiboken cmake file suffix. If left empty, system default will be used: <ShibokenConfigPYTHON_CONFIG_SUFFIX.cmake>")
#SET(PYTHON_BASENAME "" CACHE STRING "Same as PYTHON_SUFFIX but for PySide. If left empty, PYTHON_SUFFIX will be used: <PySideConfigPYTHON_BASENAME.cmake>")
endif()
if(DEFINED MACPORTS_PREFIX)
find_package(Shiboken REQUIRED HINTS "${PYTHON_LIBRARY_DIR}/cmake")
find_package(PySide REQUIRED HINTS "${PYTHON_LIBRARY_DIR}/cmake")
endif(DEFINED MACPORTS_PREFIX)
find_package(Shiboken2 QUIET)# REQUIRED
if (Shiboken2_FOUND)
# Shiboken2 config file was found but it may use the wrong Python version
# Try to get the matching config suffix and repeat finding the package
if (PYTHON_VERSION_MAJOR LESS 3)
set(SHIBOKEN_PATTERN -python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
else()
set(SHIBOKEN_PATTERN .cpython-${PYTHON_VERSION_MAJOR}${PYTHON_VERSION_MINOR})
endif()
file(GLOB SHIBOKEN_CONFIG "${Shiboken2_DIR}/Shiboken2Config${SHIBOKEN_PATTERN}*.cmake")
if (SHIBOKEN_CONFIG)
get_filename_component(SHIBOKEN_CONFIG_SUFFIX ${SHIBOKEN_CONFIG} NAME)
string(SUBSTRING ${SHIBOKEN_CONFIG_SUFFIX} 15 -1 SHIBOKEN_CONFIG_SUFFIX)
string(REPLACE ".cmake" "" PYTHON_CONFIG_SUFFIX ${SHIBOKEN_CONFIG_SUFFIX})
MESSAGE(STATUS "PYTHON_CONFIG_SUFFIX: ${PYTHON_CONFIG_SUFFIX}")
find_package(Shiboken2 QUIET)
endif()
endif()
if(NOT SHIBOKEN_INCLUDE_DIR)
MESSAGE("====================\n"
"shiboken2 not found.\n"
"====================\n")
endif(NOT SHIBOKEN_INCLUDE_DIR)
find_package(PySide2 QUIET)# REQUIRED
if(NOT PYSIDE_INCLUDE_DIR)
MESSAGE("==================\n"
"PySide2 not found.\n"
"==================\n")
endif(NOT PYSIDE_INCLUDE_DIR)
find_package(PySide2Tools QUIET) #REQUIRED # PySide2 utilities (pyside2-uic & pyside2-rcc)
if(NOT PYSIDE2_TOOLS_FOUND)
MESSAGE("=======================\n"
"PySide2Tools not found.\n"
"=======================\n")
endif(NOT PYSIDE2_TOOLS_FOUND)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/Ext/PySide)
file(WRITE ${CMAKE_BINARY_DIR}/Ext/PySide/__init__.py "# PySide wrapper\n"
"from PySide2 import __version__\n"
"from PySide2 import __version_info__\n")
file(WRITE ${CMAKE_BINARY_DIR}/Ext/PySide/QtCore.py "from PySide2.QtCore import *\n\n"
"#QCoreApplication.CodecForTr=0\n"
"#QCoreApplication.UnicodeUTF8=1\n")
file(WRITE ${CMAKE_BINARY_DIR}/Ext/PySide/QtGui.py "from PySide2.QtGui import *\n"
"from PySide2.QtWidgets import *\n"
"QHeaderView.setResizeMode = QHeaderView.setSectionResizeMode\n")
file(WRITE ${CMAKE_BINARY_DIR}/Ext/PySide/QtSvg.py "from PySide2.QtSvg import *\n")
file(WRITE ${CMAKE_BINARY_DIR}/Ext/PySide/QtUiTools.py "from PySide2.QtUiTools import *\n")
if(APPLE AND NOT BUILD_WITH_CONDA)
INSTALL(
DIRECTORY
${CMAKE_BINARY_DIR}/Ext/PySide
DESTINATION
MacOS
)
else()
INSTALL(
DIRECTORY
${CMAKE_BINARY_DIR}/Ext/PySide
DESTINATION
Ext
)
endif()
else()
# set(PYTHON_SUFFIX -python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
# Below are two variables that can be left empty for standard python 3 version,
# but must be set by the user for different python versions such as 2.7, 3.5 ...
if (PYTHON_VERSION_MAJOR LESS 3)
SET(PYTHON_CONFIG_SUFFIX -python2.7 CACHE STRING "Shiboken cmake file suffix. If left empty, system default will be used: <ShibokenConfigPYTHON_CONFIG_SUFFIX.cmake>")
SET(PYTHON_BASENAME -python2.7 CACHE STRING "Same as PYTHON_SUFFIX but for PySide. If left empty, PYTHON_SUFFIX will be used: <PySideConfigPYTHON_BASENAME.cmake>")
else()
SET(PYTHON_CONFIG_SUFFIX "" CACHE STRING "Shiboken cmake file suffix. If left empty, system default will be used: <ShibokenConfigPYTHON_CONFIG_SUFFIX.cmake>")
SET(PYTHON_BASENAME "" CACHE STRING "Same as PYTHON_SUFFIX but for PySide. If left empty, PYTHON_SUFFIX will be used: <PySideConfigPYTHON_BASENAME.cmake>")
endif()
if(DEFINED MACPORTS_PREFIX)
find_package(Shiboken REQUIRED HINTS "${PYTHON_LIBRARY_DIR}/cmake")
find_package(PySide REQUIRED HINTS "${PYTHON_LIBRARY_DIR}/cmake")
endif(DEFINED MACPORTS_PREFIX)
find_package(Shiboken)# REQUIRED
if(NOT SHIBOKEN_INCLUDE_DIR)
MESSAGE(FATAL_ERROR "===================\n"
"shiboken not found.\n"
"===================\n")
endif(NOT SHIBOKEN_INCLUDE_DIR)
find_package(PySide)# REQUIRED
if(NOT PYSIDE_INCLUDE_DIR)
MESSAGE(FATAL_ERROR "=================\n"
"PySide not found.\n"
"=================\n")
endif(NOT PYSIDE_INCLUDE_DIR)
find_package(PySideTools REQUIRED) # PySide utilities (pyside-uic & pyside-rcc)
endif()
# ------------------------------ Matplotlib ------------------------------
find_package(Matplotlib)
IF(MATPLOTLIB_FOUND)
message(STATUS "-- matplotlib-${MATPLOTLIB_VERSION} has been found.")
ELSE(MATPLOTLIB_FOUND)
message("=====================================================\n"
"matplotlib not found, Plot module won't be available.\n"
"=====================================================\n")
ENDIF(MATPLOTLIB_FOUND)
# ------------------------------------------------------------------------
endif(BUILD_GUI)
endif(NOT FREECAD_LIBPACK_USE OR FREECAD_LIBPACK_CHECKFILE_CLBUNDLER)
if(BUILD_VR)
find_package(Rift)
endif(BUILD_VR)
# copy build convenient files for M$
if(WIN32)
if (EXISTS BuildAll.bat)
configure_file(BuildAll.bat ${CMAKE_BINARY_DIR}/BuildAll.bat COPYONLY)
endif (EXISTS BuildAll.bat)
#configure_file(BuildAllNice.bat ${CMAKE_BINARY_DIR}/BuildAllNice.bat COPYONLY)
endif(WIN32)
# version information of libraries
#
if(OCC_INCLUDE_DIR AND EXISTS ${OCC_INCLUDE_DIR}/Standard_Version.hxx)
set(HAVE_OCC_VERSION 1)
endif(OCC_INCLUDE_DIR AND EXISTS ${OCC_INCLUDE_DIR}/Standard_Version.hxx)
configure_file(LibraryVersions.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/LibraryVersions.h)
# ================================================================================
# == Global Compiler and Linker Settings =========================================
include_directories(${CMAKE_BINARY_DIR}/src
${CMAKE_SOURCE_DIR}/src)
# check for 64-bit platform
IF(CMAKE_SIZEOF_VOID_P EQUAL 8)
MESSAGE(STATUS "Platform is 64-bit, set -D_OCC64")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_OCC64")
add_definitions(-D_OCC64 )
ELSE(CMAKE_SIZEOF_VOID_P EQUAL 8)
MESSAGE(STATUS "Platform is 32-bit")
ENDIF(CMAKE_SIZEOF_VOID_P EQUAL 8)
IF(MSVC)
# set default compiler settings
SET (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Zm150")
SET (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DFC_DEBUG /Zm150 /bigobj")
# set default libs
SET (CMAKE_C_STANDARD_LIBRARIES "kernel32.lib user32.lib gdi32.lib winspool.lib SHFolder.lib shell32.lib ole32.lib oleaut32.lib uuid.lib comdlg32.lib advapi32.lib winmm.lib comsupp.lib Ws2_32.lib dbghelp.lib ")
set (CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}")
# set linker flag /nodefaultlib
set (CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /NODEFAULTLIB")
set (CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} /NODEFAULTLIB")
set (CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /NODEFAULTLIB")
IF(FREECAD_RELEASE_PDB)
set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Zi")
set (CMAKE_SHARED_LINKER_FLAGS_RELEASE "${CMAKE_SHARED_LINKER_FLAGS_RELEASE} /DEBUG")
ENDIF(FREECAD_RELEASE_PDB)
IF(FREECAD_RELEASE_SEH)
SET (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /EHa")
ENDIF(FREECAD_RELEASE_SEH)
OPTION(FREECAD_USE_MP_COMPILE_FLAG "Add /MP flag to the compiler definitions. Speeds up the compile on multi processor machines" OFF)
if(FREECAD_USE_MP_COMPILE_FLAG)
# set "Build with Multiple Processes"
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP")
SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /MP")
endif()
# Mark 32 bit executables large address aware so they can use > 2GB address space
# NOTE: This setting only has an effect on machines with at least 3GB of RAM, although it sets the linker option it doesn't set the linker switch 'Enable Large Addresses'
IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
set (CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /LARGEADDRESSAWARE")
SET (CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /LARGEADDRESSAWARE")
ENDIF(CMAKE_SIZEOF_VOID_P EQUAL 4)
ELSE(MSVC)
SET (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DFC_DEBUG")
#MESSAGE(STATUS "DEBUG: ${CMAKE_CXX_FLAGS_DEBUG}")
MESSAGE(STATUS "Build type: ${CMAKE_BUILD_TYPE}")
ENDIF(MSVC)
IF(MINGW)
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12477
# Actually '-Wno-inline-dllimport' should work to suppress warnings of the form:
# inline function 'foo' is declared as dllimport: attribute ignored
# But it doesn't work with MinGW gcc 4.5.0 while using '-Wno-attributes' seems to
# do the trick.
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mthreads -Wno-attributes")
SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mthreads -Wno-attributes")
SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -mthreads -Wl,--export-all-symbols")
SET(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -mthreads -Wl,--export-all-symbols")
# http://stackoverflow.com/questions/8375310/warning-auto-importing-has-been-activated-without-enable-auto-import-specifie
# SET(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -static-libgcc -static-libstdc++")
LINK_LIBRARIES(-lgdi32)
ENDIF(MINGW)
# force build directory to be different to source directory
#if(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR})
#MESSAGE(SEND_ERROR "The build directory (${CMAKE_BINARY_DIR}) must be different to the source directory "
# "(${CMAKE_SOURCE_DIR}). Please choose another build directory!")
#elseif()
add_subdirectory(src)
add_subdirectory(data)
#endif()
# ================================================================================
# == Packaging ===================================================================
#add_custom_target(dist COMMAND ${CMAKE_MAKE_PROGRAM} package_source)
add_custom_target(dist-git
COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py
--srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR}
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
)
add_custom_target(distdfsg-git
COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py
--srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --dfsg
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
)
if(CMAKE_COMPILER_IS_GNUCXX OR MINGW)
add_custom_target(distcheck-git
COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py
--srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --check
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
)
add_custom_target(distcheckdfsg-git
COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py
--srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --dfsg --check
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
)
endif(CMAKE_COMPILER_IS_GNUCXX OR MINGW)
# -------------------------------- The final report ----------------------------------
MESSAGE(STATUS "==============\n"
"Summary report\n"
"==============\n")
# Qt5 needs/sets PYTHON_CONFIG_SUFFIX regarding Shiboken
MESSAGE(STATUS "Python: [${PYTHON_EXECUTABLE}] [${PYTHON_CONFIG_SUFFIX}]")
IF(DEFINED PCL_FOUND)
MESSAGE(STATUS "PCL: ${PCL_VERSION}")
ELSE(DEFINED PCL_FOUND)
MESSAGE(STATUS "PCL: not enabled")
ENDIF(DEFINED PCL_FOUND)
IF(DEFINED pybind11_FOUND)
MESSAGE(STATUS "pybind11: ${pybind11_VERSION}")
ELSE(DEFINED pybind11_FOUND)
MESSAGE(STATUS "pybind11: not enabled")
ENDIF(DEFINED pybind11_FOUND)
MESSAGE(STATUS "Boost: ${Boost_VERSION}")
MESSAGE(STATUS "XercesC: [${XercesC_LIBRARIES}] [${XercesC_INCLUDE_DIRS}]")
MESSAGE(STATUS "ZLIB: ${ZLIB_VERSION_STRING}")
MESSAGE(STATUS "PyCXX: [${PYCXX_INCLUDE_DIR}]")
MESSAGE(STATUS "OCC: ${OCC_VERSION_STRING} [${OCC_LIBRARIES}]")
IF(BUILD_SMESH)
IF(FREECAD_USE_EXTERNAL_SMESH)
MESSAGE(STATUS "SMESH: ${SMESH_VERSION}")
ELSE(FREECAD_USE_EXTERNAL_SMESH)
MESSAGE(STATUS "SMESH: build internal")
MESSAGE(STATUS " MEDFile: [${MEDFILE_LIBRARIES}] [${MEDFILE_INCLUDE_DIRS}]")
MESSAGE(STATUS " HDF5: ${HDF5_VERSION}")
MESSAGE(STATUS " VTK: ${VTK_VERSION}")
ENDIF(FREECAD_USE_EXTERNAL_SMESH)
ELSE(BUILD_SMESH)
MESSAGE(STATUS "SMESH: do not build")
ENDIF(BUILD_SMESH)
IF(DEFINED NETGEN_FOUND)
MESSAGE(STATUS "NETGEN: ${NETGEN_VERSION} [${NETGEN_DEFINITIONS}] [${NETGEN_CXX_FLAGS}] [${NGLIB_INCLUDE_DIR}] [${NGLIB_LIBRARIES}] [${NETGEN_INCLUDE_DIRS}]")
ELSE(DEFINED NETGEN_FOUND)
MESSAGE(STATUS "NETGEN: not enabled")
ENDIF(DEFINED NETGEN_FOUND)
#MESSAGE(STATUS "OpenCV: ${OpenCV_VERSION}")
IF(DEFINED SWIG_FOUND)
MESSAGE(STATUS "SWIG: ${SWIG_VERSION}")
ELSE(DEFINED SWIG_FOUND)
MESSAGE(STATUS "SWIG: not found")
ENDIF(DEFINED SWIG_FOUND)
IF(DEFINED EIGEN3_FOUND)
MESSAGE(STATUS "Eigen3 ${EIGEN3_VERSION}")
ELSE(DEFINED EIGEN3_FOUND)
MESSAGE(STATUS "Eigen3: not found")
ENDIF(DEFINED EIGEN3_FOUND)
IF(NOT BUILD_QT5)
MESSAGE(STATUS "Qt4: ${Qt4_VERSION}")
IF(QT_QTWEBKIT_FOUND)
MESSAGE(STATUS "QtWebKit: found")
ELSE(QT_QTWEBKIT_FOUND)
MESSAGE(STATUS "QtWebKit: not found")
ENDIF(QT_QTWEBKIT_FOUND)
MESSAGE(STATUS "Shiboken: ${Shiboken_VERSION} [${SHIBOKEN_INCLUDE_DIR}]")
MESSAGE(STATUS "PySide: ${PySide_VERSION} [${PYSIDE_INCLUDE_DIR}]")
MESSAGE(STATUS "PySideTools: [${PYSIDEUIC4BINARY}] [${PYSIDERCC4BINARY}]")
ELSE(NOT BUILD_QT5)
MESSAGE(STATUS "Qt5Core: ${Qt5Core_VERSION}")
MESSAGE(STATUS "Qt5Network: ${Qt5Network_VERSION}")
MESSAGE(STATUS "Qt5Xml: ${Qt5Xml_VERSION}")
IF (BUILD_GUI)
MESSAGE(STATUS "Qt5Widgets: ${Qt5Widgets_VERSION}")
MESSAGE(STATUS "Qt5PrintSupport: ${Qt5PrintSupport_VERSION}")
MESSAGE(STATUS "Qt5OpenGL: ${Qt5OpenGL_VERSION}")
MESSAGE(STATUS "Qt5Svg: ${Qt5Svg_VERSION}")
MESSAGE(STATUS "Qt5UiTools: ${Qt5UiTools_VERSION}")
MESSAGE(STATUS "Qt5Concurrent: ${Qt5Concurrent_VERSION}")
IF(BUILD_WEB)
MESSAGE(STATUS "Qt5WebKitWidgets: ${Qt5WebKitWidgets_VERSION}")
MESSAGE(STATUS "Qt5WebEngineWidgets: ${Qt5WebEngineWidgets_VERSION}")
ELSE(BUILD_WEB)
MESSAGE(STATUS "Qt5WebKitWidgets: not needed (BUILD_WEB)")
MESSAGE(STATUS "Qt5WebEngineWidgets: not needed (BUILD_WEB)")
ENDIF(BUILD_WEB)
ELSE(BUILD_GUI)
MESSAGE(STATUS "Qt5Widgets: not needed")
MESSAGE(STATUS "Qt5PrintSupport: not needed")
MESSAGE(STATUS "Qt5OpenGL: not needed")
MESSAGE(STATUS "Qt5Svg: not needed")
MESSAGE(STATUS "Qt5UiTools: not needed")
MESSAGE(STATUS "Qt5Concurrent: not needed")
MESSAGE(STATUS "Qt5WebKitWidgets: not needed")
ENDIF(BUILD_GUI)
IF(DEFINED MACPORTS_PREFIX)
IF(DEFINED Shiboken_FOUND)
MESSAGE(STATUS "Shiboken: ${Shiboken_VERSION} [${SHIBOKEN_INCLUDE_DIR}]")
ELSE(DEFINED Shiboken_FOUND)
MESSAGE(STATUS "Shiboken: not found (only searched if MACPORTS_PREFIX is defined)")
ENDIF(DEFINED Shiboken_FOUND)
IF(DEFINED PySide_FOUND)
MESSAGE(STATUS "PySide: ${PySide_VERSION} [${PYSIDE_INCLUDE_DIR}]")
IF(NOT PYSIDE_INCLUDE_DIR)
MESSAGE(STATUS " IncludeDir: Unable to find, python version missmatch?")
ENDIF(NOT PYSIDE_INCLUDE_DIR)
ELSE(DEFINED PySide_FOUND)
MESSAGE(STATUS "PySide: not found (only searched if MACPORTS_PREFIX is defined)")
ENDIF(DEFINED PySide_FOUND)
ENDIF(DEFINED MACPORTS_PREFIX)
IF(DEFINED Shiboken2_FOUND)
MESSAGE(STATUS "Shiboken2: ${Shiboken2_VERSION} [${Shiboken2_DIR}] [${SHIBOKEN_INCLUDE_DIR}]")
ELSE(DEFINED Shiboken2_FOUND)
MESSAGE(STATUS "Shiboken2: not found")
ENDIF(DEFINED Shiboken2_FOUND)
IF(DEFINED PySide2_FOUND)
MESSAGE(STATUS "PySide2: ${PySide2_VERSION} [${PYSIDE_INCLUDE_DIR}]")
IF(NOT PYSIDE_INCLUDE_DIR)
MESSAGE(STATUS " IncludeDir: Unable to find, python version missmatch?")
ENDIF(NOT PYSIDE_INCLUDE_DIR)
ELSE(DEFINED PySide2_FOUND)
MESSAGE(STATUS "PySide2: not found")
ENDIF(DEFINED PySide2_FOUND)
IF(DEFINED PYSIDE2_TOOLS_FOUND)
MESSAGE(STATUS "PySide2Tools: [${PYSIDE2UICBINARY}] [${PYSIDE2RCCBINARY}]")
ELSE(DEFINED PYSIDE2_TOOLS_FOUND)
MESSAGE(STATUS "PySide2Tools: not found")
ENDIF(DEFINED PYSIDE2_TOOLS_FOUND)
ENDIF(NOT BUILD_QT5)
IF(FREECAD_USE_FREETYPE)
IF(DEFINED FREETYPE_FOUND)
MESSAGE(STATUS "Freetype: ${FREETYPE_VERSION_STRING}")
ELSE(DEFINED FREETYPE_FOUND)
MESSAGE(STATUS "Freetype: not found")
ENDIF(DEFINED FREETYPE_FOUND)
ELSE(FREECAD_USE_FREETYPE)
MESSAGE(STATUS "Freetype: disabled")
ENDIF(FREECAD_USE_FREETYPE)
MESSAGE(STATUS "OpenGLU: ${OPENGL_glu_LIBRARY} [${OPENGL_glu_LIBRARY}][${OPENGL_INCLUDE_DIR}]")
MESSAGE(STATUS "Coin3D: [${COIN3D_LIBRARIES}] [${COIN3D_INCLUDE_DIRS}]")
IF (WIN32)
#MESSAGE(STATUS "SPNAV: not available yet for your OS") # FREECAD_USE_3DCONNEXION instead...
ELSE(WIN32)
IF(DEFINED SPNAV_FOUND)
MESSAGE(STATUS "SPNAV: [${SPNAV_LIBRARY}] [${SPNAV_INCLUDE_DIR}]")
ELSE(DEFINED SPNAV_FOUND)
MESSAGE(STATUS "SPNAV: not found")
ENDIF(DEFINED SPNAV_FOUND)
ENDIF(WIN32)
IF(MATPLOTLIB_FOUND)
MESSAGE(STATUS "Matplotlib: ${MATPLOTLIB_VERSION}")
ELSE(MATPLOTLIB_FOUND)
MESSAGE(STATUS "Matplotlib: not found")
ENDIF(MATPLOTLIB_FOUND)
IF(BUILD_VR)
IF(DEFINED RIFT_FOUND)
MESSAGE(STATUS "Rift: ${Rift_VERSION}")
ELSE(DEFINED RIFT_FOUND)
MESSAGE(STATUS "Rift: not found")
ENDIF(DEFINED RIFT_FOUND)
ELSE(BUILD_VR)
MESSAGE(STATUS "Rift: not enabled (BUILD_VR)")
ENDIF(BUILD_VR)
IF(DOXYGEN_FOUND)
MESSAGE(STATUS "Doxygen: ${DOXYGEN_VERSION}")
MESSAGE(STATUS " Language: ${DOXYGEN_LANGUAGE}")
IF(COIN3D_DOC_FOUND)
MESSAGE(STATUS " Coin3D_DOC: found [${COIN3D_DOC_PATH}]")
ELSE(COIN3D_DOC_FOUND)
MESSAGE(STATUS " Coin3D_DOC: not found")
ENDIF(COIN3D_DOC_FOUND)
ELSE(DOXYGEN_FOUND)
MESSAGE(STATUS "Doxygen: not found")
ENDIF(DOXYGEN_FOUND)
# Print message to start build process
if (${CMAKE_BUILD_TOOL} MATCHES "make")
MESSAGE("=======================================\n"
"Now run 'make' to build ${PACKAGE_NAME}\n"
"=======================================\n")
endif()
You can’t perform that action at this time.