Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
77 lines (65 sloc) 2.42 KB
#@TYPE: Machine
#@NAME: Boundary Devices Nitrogen6X
#@SOC: i.MX6 Q/DL
#@DESCRIPTION: Machine configuration for Boundary Devices Nitrogen6X
#@MAINTAINER: Ian Coolidge <ian@boundarydevices.com>
#
# Note that this machine configuration also supports the SABRE Lite
# reference design and the Nitrogen6X-SOM.
#
# By default, this machine will build for the standard Quad-Core, 1GB
# option.
#
# To build U-Boot for other CPU or memory combinations, you can set
# the UBOOT_MACHINE variable in your local.conf according to the
# following table:
#
# Processor Memory Configuration
# -------------- ------ --------------------
# i.MX6Quad/Dual 1GB nitrogen6q_config
# i.MX6Quad/Dual 2GB nitrogen6q2g_config
# i.MX6Quad/Dual 4GB nitrogen6_max_config
# i.MX6Dual-Lite 1GB nitrogen6dl_config
# i.MX6Dual-Lite 2GB nitrogen6dl2g_config
# i.MX6Solo 512MB nitrogen6s_config
# i.MX6Solo 1GB nitrogen6s1g_config
#
# See this blog post for details:
# http://boundarydevices.com/u-boot-updates-for-i-mx6-single
#
#
MACHINEOVERRIDES =. "mx6:mx6dl:mx6q:"
include conf/machine/include/imx-base.inc
include conf/machine/include/tune-cortexa9.inc
KERNEL_DEVICETREE = "imx6q-sabrelite.dtb \
imx6q-nitrogen6_max.dtb imx6qp-nitrogen6_max.dtb \
imx6q-nitrogen6x.dtb imx6dl-nitrogen6x.dtb \
imx6q-nitrogen6_som2.dtb imx6qp-nitrogen6_som2.dtb \
imx6dl-nitrogen6_vm.dtb imx6dl-nitrogen6_vm-magstripe.dtb \
"
# Not yet supported by Linux mainline
KERNEL_DEVICETREE_remove_use-mainline-bsp = "imx6dl-nitrogen6_vm.dtb imx6dl-nitrogen6_vm-magstripe.dtb"
KERNEL_IMAGETYPE = "zImage"
PREFERRED_PROVIDER_u-boot ??= "u-boot-boundary"
PREFERRED_PROVIDER_virtual/bootloader ??= "u-boot-boundary"
PREFERRED_PROVIDER_virtual/kernel ??= "linux-boundary"
PREFERRED_PROVIDER_virtual/kernel_use-mainline-bsp ??= "linux-fslc"
# wic support
WKS_FILE = "sdimage-bootpart.wks"
IMAGE_BOOT_FILES_append = " \
boot.scr-${MACHINE};boot.scr \
"
WKS_FILE_DEPENDS = " \
u-boot-script-boundary \
\
e2fsprogs-native \
bmap-tools-native \
"
UBOOT_MACHINE ?= "nitrogen6q_defconfig"
SERIAL_CONSOLES = "115200;ttymxc1"
MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-wl12xx"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += " \
kernel-image \
kernel-devicetree \
"
MACHINE_FEATURES += " pci wifi bluetooth"
You can’t perform that action at this time.