This repository has been archived by the owner on Jun 24, 2020. It is now read-only.
SIO Commands for Device ID $70
Oscar Fowler edited this page May 11, 2020
·
12 revisions
The following table shows the currently proposed SIO commands for Device $70 - The FujiNet Device itself.
Command | Description |
---|---|
$B0 | DIAGNOSTIC: Alter SIO Timing for T0 |
$B1 | DIAGNOSTIC: Alter SIO Timing for T1 |
$B2 | DIAGNOSTIC: Alter SIO Timing for T2 |
$B3 | DIAGNOSTIC: Alter SIO Timing for T3 |
$B4 | DIAGNOSTIC: Alter SIO Timing for T4 |
$B5 | DIAGNOSTIC: Alter SIO Timing for T5 |
$E6 | TNFS Unmount Host |
$E7 | TNFS New Disk |
$E8 | Get Adapter Config |
$E9 | TNFS Unmount Disk Image |
$F0 | Enable MidiMaze mode |
$F1 | TNFS Write Device Slots |
$F2 | TNFS Read Device Slots |
$F3 | TNFS Write Host Slots |
$F4 | TNFS Read Host Slots |
$F5 | TNFS Close Directory |
$F6 | TNFS Read Directory |
$F7 | TNFS Open Directory |
$F8 | TNFS Mount Disk Image |
$F9 | TNFS Mount TNFS Host |
$FA | Get WiFi Status |
$FB | Set SSID and Connect |
$FC | Scan Result |
$FD | Scan Networks |
$FE | Get SSID |
$FF | Reset FujiNet |
This list is very much in progress and is subject to change.