Skip to content
Permalink
Branch: 16.02
Commits on Sep 27, 2019
  1. imx6: fix GW5910 LSR Sterling-LWB Bluetooth uart config

    Gateworks committed Sep 27, 2019
    In Linux 4.4 the property name for indicating flow-control was
    fsl,uart-has-rtscts
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 26, 2019
  1. imx6: add support for GW5910 LSR Sterling-LWB WiFi and Bluetooth radio

    Gateworks committed Sep 26, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 24, 2019
  1. imx6: bootscript: use partition UUID for rootfs if possible

    Gateworks committed Sep 24, 2019
    Specifying root filesystem by device is non-deterministic for several reasons:
     - USB device unmeration order is not garunteeed for USB storage devs
     - MMC devs ordering is determined by the instance of the MMC host controller
       including non-storage SDIO devices which can throw off numbering depending
       on kernel versions.
    
    It is recommended to use partition UUID
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 13, 2019
  1. imx6: bootscript: enable UBI fastmap support

    Gateworks committed Sep 13, 2019
    UBI Fastmap support is stable in the 4.4 kernel so lets take
    advantage of it to shave off 5-10 seconds of boot time.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. imx6: config-4.4: enable UBI_MTD_FASTMAP

    Gateworks committed Sep 13, 2019
    Ventana boards are largely NAND based. Using UBI Fastmap greatly speeds up
    the time the bootloader and kernel need to scan the UBI on boot saving
    5 to 10 seconds on bootup.
    
    To take advantage of this you must boot the kernel at least once with
    'ubi.fm_autoconvert=1' to build the fastmap table. To take advantage of
    this in U-Boot you also need to have the feature enabled there.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. imx6: add support for edo-4 mode NAND

    Gateworks committed Sep 13, 2019
    The Cypress S34ML16G2 2GiB NAND flash that is being used on newer revision
    boards (as the Micron 2GiB part went end of life) does not support the
    get/set features ONFI command causing the edo mode setting to fail.
    
    Resolve this by only performing the get/set on chips that support those
    commands.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  4. imx6: fix GW5907 compatible string

    Gateworks committed Sep 13, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jun 10, 2019
  1. imx6: add support for GW5913

    Gateworks committed Jun 10, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 28, 2019
  1. gateworks: use http://dev.gateworks.com for prebuilt bootloader

    Gateworks committed May 28, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 22, 2019
  1. cns3xxx: fix PCI config space alignment

    Gateworks committed May 22, 2019
    A config space alignment issue was introduced upstream. This adds
    the backported patch for the 4.4 kernel to resolve it.
    
    Without this writing to a non aligned register (like PCI Latency) will
    alter the aligned neighboring register (ie writting to PCI latency affects
    cache line size which can lead to unpredictable results).
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 17, 2019
  1. imx6: add support for Ventana GW5905/GW5910/GW5912

    Gateworks committed May 15, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 15, 2019
  1. imx6: images: ventana: allow normal flash geometries to have more blocks

    Gateworks committed May 15, 2019
    The latest 2GiB NAND flash parts used by ventana are 2k page-size.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Feb 27, 2019
  1. uboot-envtools: remove erasesize from MMC config

    Gateworks committed Feb 27, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 27, 2018
  1. Merge pull request #2 from lexknuther/16.02

    Gateworks committed Sep 27, 2018
    Fixed a bash syntax error in imx6.sh.
  2. Fixed a bash syntax error in imx6.sh. It included a suprious ')' in a…

    Brandon P. Enochs
    Brandon P. Enochs committed Sep 27, 2018
    … case statement.
Commits on Aug 2, 2018
  1. feeds.conf.default: bump packages feeds to get new bluez

    Gateworks committed Aug 2, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jul 10, 2018
  1. configs: imx6: add ads1015 hwmon module to filesystem

    Gateworks committed Jul 10, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. package: kernel: hwmon: add support for ads1015 ADC

    Gateworks committed Jan 9, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. imx6: config-4.4: enable DS1682 driver

    Gateworks committed Apr 7, 2017
    The DS1682 Elapsed Time Recorder device appears on the GW5901/GW5902
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  4. imx6: add support for GW5907

    Gateworks committed Jan 9, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  5. imx6: fix GW5902 i2c3

    Gateworks committed Jul 10, 2018
    The GW5902 I2C3 bus never got connected to the processor. The GW5902-A.1
    has a hardware modification that connects the devices intended for I2C3 to
    I2C2.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  6. imx6: fix GW5901/GW5902 iomux

    Gateworks committed Jul 10, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jun 4, 2018
  1. imx6: fix GW5902 watchdog

    Gateworks committed Jun 4, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. imx6: add support for GW5901 / GW5902

    Gateworks committed Apr 21, 2016
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Apr 25, 2018
  1. imx6: add support for GW5909

    Gateworks committed Apr 25, 2018
    The GW5909 shares the same peripheral set as the GW5904.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Apr 13, 2018
  1. imx6: add support for GW5908

    Gateworks committed Apr 13, 2018
    The GW5908 shares the same peripheral set as the GW53xx.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Feb 21, 2018
  1. config: added nfnetlink/rndisk drivers

    Gateworks committed Feb 21, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 19, 2017
  1. Ventana: add ability to symlink dts files and support for GW5906

    Gateworks committed Sep 19, 2017
    The GW5906 is the same as a GW552x from the device-tree perspective.
    Instead of making a direct copy of the dts file and updating the
    model parsing just symlink the dts.
    
    root@OpenWrt:/# echo $(cat /proc/device-tree/model)
    Gateworks Ventana i.MX6 DualLite/Solo GW552X
    root@OpenWrt:/# echo $(cat /proc/device-tree/board)
    GW5906-A
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Sep 8, 2017
  1. cns3xxx: fix GPIO controller interrupt enable

    Gateworks committed Sep 8, 2017
    The cns3xxx interrupt controller uses a single register and as such
    the 'mask' reg/functions must be used as opposed to the 'enable'/'disable'
    reg/functions.
    
    This fixes an issue that occurs if more than one GPIO on a specific controller
    (there is GPIOA and GPIOB each having 32 GPIO's) uses interrupts. When one
    would get enabled all others would be disabled prior to this patch.
    
    This fixes GPS PPS assertions on the Laguna product family
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Aug 31, 2017
  1. Ventana: backport IMX FEC patch to allow reception of larger frames

    Gateworks committed Aug 31, 2017
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. uqmi: update uqmi/qmi.sh to latest LEDE version

    Gateworks committed Aug 25, 2017
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. Laguna: add additional tools to gateworks test image config

    Gateworks committed Aug 14, 2017
    Added:
     - busybox lsusb lspci, i2cget, i2cset, i2cdump, i2cdetect
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jul 21, 2017
  1. Laguna: add gateworks config for test image

    Gateworks committed Jun 30, 2016
    This adds an OpenWrt config for an image that is used on the Gateworks
    test fixture.
    
    Notable configuration items:
    - ramdisk image (for quick flash and boot)
    - minimal drivers and packages (for quick flash and boot)
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. Laguna: disable PCI external isolated interrupts for GW2394

    Gateworks committed Nov 17, 2016
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. Laguna: fix led configuration for GW2386/GW2393

    Gateworks committed Jul 21, 2017
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Older
You can’t perform that action at this time.