Skip to content
Permalink
Branch: 18.0x
Commits on Jun 5, 2019
  1. gateworks: configs: octeontx: enable hw crypto for openssl/gnutls

    Gateworks committed Jun 5, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 31, 2019
  1. gateworks: configs: octeontx: add cpt (crypto) drivers and firmware

    Gateworks committed May 31, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. firmware: add cavium cpt (crypto) firmware package

    Gateworks committed May 31, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. kernel: add kmod-crypto-cavium-cpt and kmod-crypto-cavium-zip

    Gateworks committed May 30, 2019
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on May 24, 2018
  1. feeds: pin feeds to revisions tested against to avoid build errors

    Gateworks committed May 24, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Apr 16, 2018
  1. octeontx: remove BRIDGE disable from kernel config

    Gateworks committed Apr 16, 2018
    CONFIG_BRIDGE does not need to be enabled in target kernel configs as the
    generic linux config will enable it but for this to happen it can't be
    unconfiged.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Feb 7, 2018
  1. added Gateworks Makefile scripts and default configuration files

    Gateworks committed Feb 7, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. imx6: add support for the intel gbit driver on GW5520

    Gateworks committed Feb 1, 2018
    The Gateworks GW5520 board uses 2x intel gigabit mac's, instead of the
    internal i.MX6 FEC.
    
    Add support for these.
    
    CC: Scott V. Kamp <outbackdingo@gmail.com>
    CC: Koen Vandeputte <koen.vandeputte@ncentric.com>
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  3. imx6: remove support for 4.9

    Gateworks committed Feb 1, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  4. imx6: switch to kernel 4.14

    Gateworks committed Feb 1, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  5. imx6: add support for Linux 4.14

    Gateworks committed Feb 1, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  6. kernel: add missing config symbols

    Gateworks committed Feb 1, 2018
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  7. octeontx: add FAT FS support to kernel

    Gateworks committed Feb 7, 2018
    The CN80XX Boot firmware uses an embedded FAT12 filesystem. For some reason
    busybox can't mount this unless its enabled static in the kernel.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  8. octeontx: remove static EXT2/3/4 FS support

    Gateworks committed Feb 7, 2018
    We are using F2FS as our overlay read/write FS. Others can be supported
    as modules.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  9. octeontx: add USB_PCI support

    Gateworks committed Feb 7, 2018
    The CN80XX XHCI is supported through PCI
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jan 24, 2018
  1. add support for OCTEON TX target

    Gateworks committed Jan 23, 2018
    The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and
    periperhals from the Cavium ThunderX SoC.
    
    This initial support provides a 4.14 kernel and kernel+initramfs that is
    bootable on the Gateworks Newport GW630x as well as the Cavium sff8104
    reference board.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  2. kernel/modules/other: disable Nokia BT UART

    Gateworks committed Jan 18, 2018
    disable the Nokia BT UART present on Nikia N9, N900 & N950 added in 4.12.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Commits on Jan 18, 2018
  1. ipq806x: remove merged ipq4019 patch

    chunkeey authored and mkresin committed Jan 18, 2018
    The patch 0022-dts-ipq4019-support-ARMv7-PMU.patch
    was merged into 4.8-rc1.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
    [refresh patches]
    Signed-off-by: Mathias Kresin <dev@kresin.me>
  2. ipq806x: remove dependency on non-existent kmod

    chunkeey authored and mkresin committed Jan 17, 2018
    During the integration of the ipq40xx target,
    the phy drivers were included into the ipq806x's
    target kernel config.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  3. ipq-wifi: align AVM FRITZ!Box 4040's board-2.bin package

    chunkeey authored and mkresin committed Jan 17, 2018
    This patch renames the AVM FRITZ!Box 4040's board-2.bin
    file and package to match the 'vendor_product' format.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  4. ipq806x: overhaul AVM FRITZ!box 4040 device-tree file

    chunkeey authored and mkresin committed Jan 17, 2018
    This patch aligns the device-tree file with the latest
    guidelines.
     - No longer include qcom-ipq4019-ap.dk01.1.dtsi. This
       file is only partially upstream and therefore subjected
       to changes that might not be compatible with the board.
    
       As a result, the definitions from the file have been
       copied into this dts.
    
     - exclusively use decimal GPIO addresses.
    
     - reorganize the reserved-memory layout to waste less
       memory. There's no point in keeping the u-boot loader
       around. This should also make it possible    to create
       an image that will boot with the original EVA/ADAM2 loader
       without needing to install the modified u-boot loader.
       And finally mark the "tz-apps" as reusable.
       There isn't a way to  upload apps to the trust-zone in OpenWrt
       yet. But it might see some use in the future as a "secure"
       key-store/TPM.
    
     - sort the first-level nodes alphabetically.
     - sort nodes with an address by the address.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  5. firmware: ath10k-firmware: update QCA988x firmware to 10.2.4-1.0-00033

    chunkeey authored and mkresin committed Dec 21, 2017
    This patch updates ath10k-firmware to use the
    firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA988x.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  6. firmware: ath10k-firmware: update QCA9887 firmware to 10.2.4-1.0-00033

    chunkeey authored and mkresin committed Dec 21, 2017
    This patch updates ath10k-firmware to use the
    firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA9887.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  7. firmware: ath10k-firmware: update QCA9888 firmware to 10.4-3.4-00104

    chunkeey authored and mkresin committed Dec 21, 2017
    This patch updates ath10k-firmware to use the
    firmware-5.bin_10.4-3.4-00104 firmware for the QCA9888.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  8. firmware: ath10k-firmware: update QCA9984 firmware to 10.4-3.4-00104

    chunkeey authored and mkresin committed Dec 21, 2017
    This patch updates ath10k-firmware to use the
    firmware-5.bin_10.4-3.4-00104 firmware for the QCA9984.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  9. firmware: ath10k-firmware: update QCA4019 firmware to 10.4-3.4-00104

    chunkeey authored and mkresin committed Dec 21, 2017
    This patch updates ath10k-firmware to use the
    firmware-5.bin_10.4-3.4-00104 firmware for the QCA4019.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  10. firmware: ath10k-firmware: update to 2017-12-20

    chunkeey authored and mkresin committed Dec 21, 2017
    This update automatically includes a new firmware for the QCA6174:
    firmware-6.bin_WLAN.RM.4.4.1-00079-QCARMSWPZ-1
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  11. odhcp6c: add sendopts config support and update to latest git HEAD

    dedeckeh committed Jan 16, 2018
    Add sendopts config support allowing to add options in sent DHCPv6 packets.
    
    Options can be configured as follows :
    	uci set network.wan6.sendopts="sntpservers:3001:3001::1,3001:3001::2 11:00000000000000000000006674692F 0x3e8:ABCDEF"
    
    Based on a patch by Frank Andrieu <fandrieu@gmail.com>
    
    See https://git.openwrt.org/?p=project/odhcp6c.git;a=commit;h=510aaf6d528210c5e8a6159f9b80b32615e88c5f
    for a more detailed description.
    
    Latest git changes :
    	1f93bd4 dhcpv6: rework option passthrough logic
    	a477e95 odhcp6c: rework userclass and vendorclass command handling
    	510aaf6 odhcp6c: add -x opt:val support
    	ab75be1 treewide: update copyrights to 2018
    	f3a4609 odhcp6c: let odhcp6c_add_state return a success/failure indication
    
    Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
  12. ramips: tl-wr840n-v5: increase firmware partition for 4Mmtk layot

    xssa authored and blogic committed Dec 24, 2017
    According to console log during TP-Link TL-WR840N v5 OEM firmware update
    procedure 0x3e0000-0x3f0000 64kB "config" partition, which is used to store
    router's configuration settings, is erased and recreated again during every
    OEM firmware update procedure, thus does not contain any valuable factory data.
    So it is conviniant to use this extra 64kB erase block for jffs overlay due
    limited flash size on this device like it used on TP-Link's ar71xx boards.
    
    Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
  13. tools/mpfr: update to 4.0.0

    hnyman authored and blogic committed Jan 17, 2018
    Update mpfr to 4.0.0
    
    Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
  14. tools/mpc: Update to 1.1.0

    hnyman authored and blogic committed Jan 17, 2018
    Update mpc to 1.1.0
    
    (note: adds compatibility with mpfr 4.0.0)
    
    Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
  15. util-linux: add fstrim support

    dibdot authored and blogic committed Jan 12, 2018
    This PR adds optional fstrim support
    
    Signed-off-by: Dirk Brenken <dev@brenken.org>
  16. kirkwood: fix sysupgrade

    youxiaojie authored and mkresin committed Jan 17, 2018
    The platform_check_image() stub need to return 0 for success, otherwise
    the sysupgrade will fail with:
    
      Image check 'platform_check_image' failed.
    
    Fixes: aa6f5f1 ("kirkwood: use image metadata")
    Signed-off-by: 尤晓杰 <yxj790222@163.com>
    [reworded commit message}
    Signed-off-by: Mathias Kresin <dev@kresin.me>
  17. ipq806x: fix ZyXEL NBG6817 sysupgrade

    mkresin committed Jan 17, 2018
    Use the first found directory in the tar archive instead of relying on
    a directory named according to the userspace boardname.
    
    It allows to change the boardname without adding another compatibility
    layer to the zyxel sysupgrade.
    
    Fixes: 33f09cf ("ipq806x: convert to dt-based board-detection")
    Signed-off-by: Mathias Kresin <dev@kresin.me>
  18. base-files: gpio switch: check if direction can be set

    mkresin committed Jan 15, 2018
    Obviously not all GPIO controller allow to change the direction. The issue
    is around since the beginning of the script but only due to the recent
    changes error messages are more visible.
    
    Add a check if a change of the direction is supported by the GPIO
    controller and fallback to setting only the value if not.
    
    Fixes: FS#1271
    Signed-off-by: Mathias Kresin <dev@kresin.me>
Older
You can’t perform that action at this time.