GitBook: [main] 2 pages modified

README.md

@@ -1,35 +1,38 @@
-# HackerTV
- Turning a Seeed Wio Terminal into a modular Universal TV Remote.
-
- You MUST use these libraries when using the Seeed Wio Terminal as they have support for SAMD51 architecture.
-
-- IR Library: https://github.com/Seeed-Studio/Seeed_Arduino_IRSendRev
-- Display Library: https://github.com/Seeed-Studio/Seeed_Arduino_LCD
-
+# HackerTV ReadMe
+
+Turning a Seeed Wio Terminal into a modular Universal TV Remote.
+
+You MUST use these libraries when using the Seeed Wio Terminal as they have support for SAMD51 architecture.
+
+* IR Library: [https://github.com/Seeed-Studio/Seeed\_Arduino\_IRSendRev](https://github.com/Seeed-Studio/Seeed_Arduino_IRSendRev)
+* Display Library: [https://github.com/Seeed-Studio/Seeed\_Arduino\_LCD](https://github.com/Seeed-Studio/Seeed_Arduino_LCD)
+
 ### Code is a prototype, no guarentee of any sort is implied. Use at your own risk.
- 
+
 This project is based on:
- - https://www.youtube.com/watch?v=C9AlljLst2o
- - https://github.com/lakshanthad/Wio_Terminal_Classroom_Arduino/tree/main/Classroom%2011
+
+* [https://www.youtube.com/watch?v=C9AlljLst2o](https://www.youtube.com/watch?v=C9AlljLst2o)
+* [https://github.com/lakshanthad/Wio\_Terminal\_Classroom\_Arduino/tree/main/Classroom 11](https://github.com/lakshanthad/Wio_Terminal_Classroom_Arduino/tree/main/Classroom%2011)
 
 To add a new TV do the following:
 
-- create a header file (example_new_tv_codes.h).  Use an existing header file as an example
-- #include your header in HackerTV_Firmware.ino
-- increment num_tv_manufacturers in HackerTV_Firmware.ino
-- Add a new entry in the HACKERTV tv Struct.  Follow the example of what is already there.
-- Add a new Case in the SWITCH statement found in the function void initialize_tv_settings() which is found towards the bottom of HackerTV_Firmware.ino
+* create a header file \(example\_new\_tv\_codes.h\).  Use an existing header file as an example
+* **include your header in HackerTV\_Firmware.ino**
+* increment num\_tv\_manufacturers in HackerTV\_Firmware.ino
+* Add a new entry in the HACKERTV tv Struct.  Follow the example of what is already there.
+* Add a new Case in the SWITCH statement found in the function void initialize\_tv\_settings\(\) which is found towards the bottom of HackerTV\_Firmware.ino
 
 ### Only use this project on TVs that you own. Don't be a jerk.
 
 To use an external Grove IR transmitter, you must change the file IRremoteBoardDefs.h  
 It is part of the IR library.  
-The file should be found at  ..\Arduino\libraries\Seeed_Arduino_IRSendRev-master\src\private  
+The file should be found at ..\Arduino\libraries\Seeed\_Arduino\_IRSendRev-master\src\private
 
-elif defined(ARDUINO_ARCH_SAMD)  
+elif defined\(ARDUINO\_ARCH\_SAMD\)  
 // use timer 3 hardcoded at this time  
-ifdef WIO_TERMINAL  
-define IR_SEND_PIN WIO_IR   // USE D0 FOR WIO TERMINAL'S EXTERNAL GROVE D/A CONNECTOR,  BY DEFAULT USES WIO_IR(D14)  
+ifdef WIO\_TERMINAL  
+define IR\_SEND\_PIN WIO\_IR // USE D0 FOR WIO TERMINAL'S EXTERNAL GROVE D/A CONNECTOR, BY DEFAULT USES WIO\_IR\(D14\)  
 else  
-define IR_SEND_PIN 9  
-endif  
+define IR\_SEND\_PIN 9  
+endif
+

SUMMARY.md

@@ -0,0 +1,4 @@
+# Table of contents
+
+* [HackerTV ReadMe](README.md)
+