Skip to content
Switch branches/tags
Go to file
Cannot retrieve contributors at this time


Below are some notes on how to build Groestlcoin Core for Windows.

The options known to work for building Groestlcoin Core on Windows are:

Other options which may work, but which have not been extensively tested are (please contribute instructions):

  • On Windows, using a POSIX compatibility layer application such as cygwin or msys2.

Installing Windows Subsystem for Linux

Follow the upstream installation instructions, available here.

Cross-compilation for Ubuntu and Windows Subsystem for Linux

The steps below can be performed on Ubuntu or WSL. The depends system will also work on other Linux distributions, however the commands for installing the toolchain will be different.

First, install the general dependencies:

sudo apt update
sudo apt upgrade
sudo apt install build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git

A host toolchain (build-essential) is necessary because some dependency packages need to build host utilities that are used in the build process.

See for a complete overview.

If you want to build the windows installer with make deploy you need NSIS:

sudo apt install nsis

Acquire the source in the usual way:

git clone
cd bitcoin

Building for 64-bit Windows

The first step is to install the mingw-w64 cross-compilation tool chain:

sudo apt install g++-mingw-w64-x86-64

Next, set the default mingw32 g++ compiler option to POSIX1:

sudo update-alternatives --config x86_64-w64-mingw32-g++

After running the above command, you should see output similar to that below. Choose the option that ends with posix.

There are 2 choices for the alternative x86_64-w64-mingw32-g++ (providing /usr/bin/x86_64-w64-mingw32-g++).

  Selection    Path                                   Priority   Status
  0            /usr/bin/x86_64-w64-mingw32-g++-win32   60        auto mode
* 1            /usr/bin/x86_64-w64-mingw32-g++-posix   30        manual mode
  2            /usr/bin/x86_64-w64-mingw32-g++-win32   60        manual mode

Press <enter> to keep the current choice[*], or type selection number:

Once the toolchain is installed the build steps are common:

Note that for WSL the Groestlcoin Core source path MUST be somewhere in the default mount file system, for example /usr/src/groestlcoin, AND not under /mnt/d/. If this is not the case the dependency autoconf scripts will fail. This means you cannot use a directory that located directly on the host Windows file system to perform the build.

Additional WSL Note: WSL support for launching Win32 applications results in Autoconf configure scripts being able to execute Windows Portable Executable files. This can cause unexpected behaviour during the build, such as Win32 error dialogs for missing libraries. The recommended approach is to temporarily disable WSL support for Win32 applications.

Build using:

PATH=$(echo "$PATH" | sed -e 's/:\/mnt.*//g') # strip out problematic Windows %PATH% imported var
sudo bash -c "echo 0 > /proc/sys/fs/binfmt_misc/status" # Disable WSL support for Win32 applications.
cd depends
make HOST=x86_64-w64-mingw32
cd ..
CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/ ./configure --prefix=/
make # use "-j N" for N parallel jobs
sudo bash -c "echo 1 > /proc/sys/fs/binfmt_misc/status" # Enable WSL support for Win32 applications.

Depends system

For further documentation on the depends system see in the depends directory.


After building using the Windows subsystem it can be useful to copy the compiled executables to a directory on the Windows drive in the same directory structure as they appear in the release .zip archive. This can be done in the following way. This will install to c:\workspace\groestlcoin, for example:

make install DESTDIR=/mnt/c/workspace/groestlcoin

You can also create an installer using:

make deploy


1: Starting from Ubuntu Xenial 16.04, both the 32 and 64 bit Mingw-w64 packages install two different compiler options to allow a choice between either posix or win32 threads. The default option is win32 threads which is the more efficient since it will result in binary code that links directly with the Windows kernel32.lib. Unfortunately, the headers required to support win32 threads conflict with some of the classes in the C++11 standard library, in particular std::mutex. It's not possible to build the Groestlcoin Core code using the win32 version of the Mingw-w64 cross compilers (at least not without modifying headers in the Groestlcoin Core source code).