Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: linux-mainline…
Commits on Apr 28, 2012
  1. Koen Kooi

    add defconfig

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. Koen Kooi

    update bootlogo

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  3. Robert Nelson Koen Kooi

    OMAP: HWMOD: add es3plus to am36xx/am35xx

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  4. Koen Kooi

    ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34x…

    Paul Walmsley authored koenkooi committed
    …x/35xx <= ES2.1
    
    The HSMMC1/HSMMC2 host controllers on OMAP34xx and
    OMAP3503/3515/3525/3530 chips at ES levels prior to 3.0 can't do multiple
    block reads[1].  Mark the hwmod data appropriately.
    
    Reported by Dave Hylands <dhylands@gmail.com> and Steve Sakoman
    <sakoman@gmail.com>.  Thanks to Steve Sakoman for further help
    testing this patch.
    
    1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read
       Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
       Revision F (October 2010) (SPRZ278F), available from
       http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf
    
    Note: added 36xx/am35 stuff in the next patch..
    
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Cc: Dave Hylands <dhylands@gmail.com>
    Cc: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  5. Santosh Koen Kooi

    ARM: OMAP4: clock: Add CPU local timer clock node

    SantoshShilimkar authored koenkooi committed
    Local timer clock is sourced from the CPU clock and hence changes
    along with CPU clock. These per CPU local timers are used as
    clock-events, so they need to be reconfigured on CPU frequency
    change as part of CPUfreq governor.
    
    Newly introduced clockevents_reconfigure() needs to know the
    twd clock-rate. Provide a clock-node to make clk_get_rate() work
    for TWD.
    
    Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Kevin Hilman <khilman@ti.com>
    [paul@pwsan.com: renamed clock node to 'mpu_periphclk' to indicate that this
     is the Cortex-A9 MPCore subsystem clock PERIPHCLK (DDI 0407G); moved
     clock and clkdev entries to match the autogenerated script output]
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  6. Benoit Cousson Koen Kooi

    ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is no…

    bcousson authored koenkooi committed
    …t supported
    
    If the module does not have any modulemode, the _disable_module function
    will do nothing. There is then no point waiting for a idle status change.
    
    It will remove the following warnings.
    
    [    0.331848] omap_hwmod: dmm: _wait_target_disable failed
    [    0.339935] omap_hwmod: emif_fw: _wait_target_disable failed
    [    0.348358] omap_hwmod: l3_main_1: _wait_target_disable failed
    [    0.356964] omap_hwmod: l3_main_2: _wait_target_disable failed
    [    0.365600] omap_hwmod: l4_abe: _wait_target_disable failed
    [    0.373931] omap_hwmod: l4_cfg: _wait_target_disable failed
    [    0.382263] omap_hwmod: l4_per: _wait_target_disable failed
    [    0.391113] omap_hwmod: l4_wkup: _wait_target_disable failed
    [    0.399536] omap_hwmod: dma_system: _wait_target_disable failed
    [    0.408325] omap_hwmod: dss_core: _wait_target_disable failed
    [    0.416839] omap_hwmod: dss_dispc: _wait_target_disable failed
    [    0.425445] omap_hwmod: dss_dsi1: _wait_target_disable failed
    [    0.433990] omap_hwmod: dss_dsi2: _wait_target_disable failed
    [    0.442504] omap_hwmod: dss_hdmi: _wait_target_disable failed
    [    0.451019] omap_hwmod: dss_rfbi: _wait_target_disable failed
    [    0.459564] omap_hwmod: dss_venc: _wait_target_disable failed
    [    0.489471] omap_hwmod: mailbox: _wait_target_disable failed
    [    0.505920] omap_hwmod: spinlock: _wait_target_disable failed
    
    Note: For such module, the state is managed automatically by HW according
    to clock domain transition. It is then not possible to wait for idle even
    later in the _idle function since the status will change at clock domain
    boundary.
    
    Signed-off-by: Benoit Cousson <b-cousson@ti.com>
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Rajendra Nayak <rnayak@ti.com>
    [paul@pwsan.com: renamed fns to indicate that they are OMAP4-only; moved
     _wait_target_disable() into _disable_module(), removing duplicate code]
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  7. Koen Kooi

    ARM: OMAP: AM3517/3505: fix crash on boot due to incorrect voltagedom…

    Paul Walmsley authored koenkooi committed
    …ain data
    
    AM3517/3505 chips don't have voltage controller and voltage processor
    IP blocks.  Trying to use OMAP34xx/36xx voltage domain data on these
    chips causes a crash during boot:
    
      omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc
      Unable to handle kernel NULL pointer dereference at virtual address 00000025
      pgd = c0004000
      [00000025] *pgd=00000000
      Internal error: Oops: 5 [#1] SMP
      Modules linked in:
      CPU: 0    Tainted: G        W     (3.2.0-rc5-00006-g402ecf4 #304)
      PC is at omap_vp_init+0x5c/0x14c
      LR is at omap_vp_init+0x54/0x14c
    
    Fix this by using very minimal voltage domain definitions for AM3517/3505.
    
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Cc: Igor Grinberg <grinberg@compulab.co.il>
    Cc: Kevin Hilman <khilman@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  8. Koen Kooi

    omap3: Increase limit on bootarg 'mpurate'

    Sanjeev Premi authored koenkooi committed
    The value of mpurate is currently expected to be less
    than 1000 when specified in MHz.
    
    This patch raises this limit to 2000 to support 1GHz
    capable processors. The new limit should be reasonable
    for quite some time.
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  9. Koen Kooi

    ti-st/st-kim: fixing firmware path

    Ricardo Salveti de Araujo authored koenkooi committed
    Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
  10. Robert Nelson Koen Kooi

    panda enable bluetooth

    RobertCNelson authored koenkooi committed
    The PandaBoard features a Texas Instruments WiLink7 Bluetooth
    chip, supported by the "btwilink" driver. The "uim" deamon
    requires sysfs entries that are filled in using this platform data.
    
    Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  11. Robert Nelson Koen Kooi

    panda: fix wl12xx regulator

    RobertCNelson authored koenkooi committed
    pulled from: http://elinux.org/Panda_How_to_kernel_3_0_rel
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  12. Robert Nelson Koen Kooi

    omap3: touchbook: drop u-boot readonly

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  13. Robert Nelson Koen Kooi

    omap3: touchbook: remove mmc gpio_wp

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  14. Robert Nelson Koen Kooi

    arm: omap: devkit8000: for lcd use samsung_lte_panel

    RobertCNelson authored koenkooi committed
    This was noticed by Robert Skretkowicz
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  15. Koen Kooi

    tlc59108: adjust for beagleboard+uLCD7

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  16. Koen Kooi

    backlight: Add TLC59108 backlight control driver

    Manjunathappa, Prakash authored koenkooi committed
    This patch adds support for I2C configurable TLC59108 backlight
    control driver.
    
    Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
    Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
  17. Robert Nelson Koen Kooi

    default to fifo mode 5, for old musb beagles

    RobertCNelson authored koenkooi committed
    The fifo mode 4, 16kb can cause corruption on musb/omap35xx,
    use mode 5, 8kb...
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  18. Koen Kooi

    beagleboard: fix uLCD7 support

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  19. Robert Nelson Koen Kooi

    meego: modedb add Toshiba LTA070B220F 800x480 support

    RobertCNelson authored koenkooi committed
     from http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  20. Robert Nelson Koen Kooi

    Turn on the USB regulator on Beagle xM explicitly

    RobertCNelson authored koenkooi committed
     Turn on the USB regulator on Beagle xM explicitly when the USB
     subsystem asks for it, rather than relying on u-boot to do it.
    
     http://www.spinics.net/lists/linux-omap/msg65102.html
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  21. Koen Kooi

    beagleboard: reinstate usage of hi-speed PLL divider

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  22. Robert Nelson Koen Kooi

    expansion: add ulcd

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  23. Robert Nelson Koen Kooi

    expansion: add trainer

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  24. Robert Nelson Koen Kooi

    expansion: add zippy2

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  25. Robert Nelson Koen Kooi

    expansion: add zippy

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  26. Robert Nelson Koen Kooi

    expansion: add mmc regulator and ds1307 rtc

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  27. Robert Nelson Koen Kooi

    expansion: add buddy param for expansionboard names

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  28. Steve Sakoman Koen Kooi

    omap: mmc: Adjust dto to eliminate timeout errors

    sakoman authored koenkooi committed
    A number of SD card types were experiencing timeout errors.  This
    could also lead to data corruption in some cases.
    
    This fix proposed by Sukumar Ghoral of TI.
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  29. Steve Sakoman Koen Kooi

    video: add timings for hd720

    sakoman authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  30. Steve Sakoman Koen Kooi

    OMAP: DSS2: add bootarg for selecting svideo

    sakoman authored koenkooi committed
     OMAP: DSS2: add bootarg for selecting svideo or composite for tv output
     also add pal-16 and ntsc-16 omapfb.mode settings for 16bpp
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  31. Robert Nelson Koen Kooi

    ksz8851 move ks8851_set_powermode

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  32. Robert Nelson Koen Kooi

    ksz8851 add ks8851_tx_check

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  33. Robert Nelson Koen Kooi

    ksz8851 add mutex lock/unlock to ks

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  34. Robert Nelson Koen Kooi

    ksz8851 make sure is awake before writing mac

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  35. Robert Nelson Koen Kooi

    ksz8851 turn off hardware interrupt druing receive process

    RobertCNelson authored koenkooi committed
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Something went wrong with that request. Please try again.