Permalink
Switch branches/tags
Commits on May 10, 2012
  1. add defconfig

    koenkooi committed May 10, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. update bootlogo

    koenkooi committed May 10, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  3. leds: heartbeat: stop on shutdown, reboot or panic

    Alexander Holler committed with koenkooi Apr 24, 2012
    A halted kernel should not show a heartbeat.
    
    Signed-off-by: Alexander Holler <hol...@ahsoftware.de>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  4. Revert "OMAP: DSS2: remove update_mode from omapdss"

    RobertCNelson committed with koenkooi Aug 3, 2011
    This reverts commit 8cff88c.
  5. OMAP: HWMOD: add es3plus to am36xx/am35xx

    RobertCNelson committed with koenkooi Dec 28, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  6. ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34x…

    Paul Walmsley committed with koenkooi Dec 16, 2011
    …x/35xx <= ES2.1
    
    The HSMMC1/HSMMC2 host controllers on OMAP34xx and
    OMAP3503/3515/3525/3530 chips at ES levels prior to 3.0 can't do multiple
    block reads[1].  Mark the hwmod data appropriately.
    
    Reported by Dave Hylands <dhylands@gmail.com> and Steve Sakoman
    <sakoman@gmail.com>.  Thanks to Steve Sakoman for further help
    testing this patch.
    
    1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read
       Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
       Revision F (October 2010) (SPRZ278F), available from
       http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf
    
    Note: added 36xx/am35 stuff in the next patch..
    
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Cc: Dave Hylands <dhylands@gmail.com>
    Cc: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  7. ARM: OMAP4: clock: Add CPU local timer clock node

    Santosh Shilimkar committed with koenkooi Dec 17, 2011
    Local timer clock is sourced from the CPU clock and hence changes
    along with CPU clock. These per CPU local timers are used as
    clock-events, so they need to be reconfigured on CPU frequency
    change as part of CPUfreq governor.
    
    Newly introduced clockevents_reconfigure() needs to know the
    twd clock-rate. Provide a clock-node to make clk_get_rate() work
    for TWD.
    
    Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Kevin Hilman <khilman@ti.com>
    [paul@pwsan.com: renamed clock node to 'mpu_periphclk' to indicate that this
     is the Cortex-A9 MPCore subsystem clock PERIPHCLK (DDI 0407G); moved
     clock and clkdev entries to match the autogenerated script output]
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  8. ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is no…

    bcousson committed with koenkooi Dec 17, 2011
    …t supported
    
    If the module does not have any modulemode, the _disable_module function
    will do nothing. There is then no point waiting for a idle status change.
    
    It will remove the following warnings.
    
    [    0.331848] omap_hwmod: dmm: _wait_target_disable failed
    [    0.339935] omap_hwmod: emif_fw: _wait_target_disable failed
    [    0.348358] omap_hwmod: l3_main_1: _wait_target_disable failed
    [    0.356964] omap_hwmod: l3_main_2: _wait_target_disable failed
    [    0.365600] omap_hwmod: l4_abe: _wait_target_disable failed
    [    0.373931] omap_hwmod: l4_cfg: _wait_target_disable failed
    [    0.382263] omap_hwmod: l4_per: _wait_target_disable failed
    [    0.391113] omap_hwmod: l4_wkup: _wait_target_disable failed
    [    0.399536] omap_hwmod: dma_system: _wait_target_disable failed
    [    0.408325] omap_hwmod: dss_core: _wait_target_disable failed
    [    0.416839] omap_hwmod: dss_dispc: _wait_target_disable failed
    [    0.425445] omap_hwmod: dss_dsi1: _wait_target_disable failed
    [    0.433990] omap_hwmod: dss_dsi2: _wait_target_disable failed
    [    0.442504] omap_hwmod: dss_hdmi: _wait_target_disable failed
    [    0.451019] omap_hwmod: dss_rfbi: _wait_target_disable failed
    [    0.459564] omap_hwmod: dss_venc: _wait_target_disable failed
    [    0.489471] omap_hwmod: mailbox: _wait_target_disable failed
    [    0.505920] omap_hwmod: spinlock: _wait_target_disable failed
    
    Note: For such module, the state is managed automatically by HW according
    to clock domain transition. It is then not possible to wait for idle even
    later in the _idle function since the status will change at clock domain
    boundary.
    
    Signed-off-by: Benoit Cousson <b-cousson@ti.com>
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Rajendra Nayak <rnayak@ti.com>
    [paul@pwsan.com: renamed fns to indicate that they are OMAP4-only; moved
     _wait_target_disable() into _disable_module(), removing duplicate code]
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  9. ARM: OMAP: AM3517/3505: fix crash on boot due to incorrect voltagedom…

    Paul Walmsley committed with koenkooi Dec 17, 2011
    …ain data
    
    AM3517/3505 chips don't have voltage controller and voltage processor
    IP blocks.  Trying to use OMAP34xx/36xx voltage domain data on these
    chips causes a crash during boot:
    
      omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc
      Unable to handle kernel NULL pointer dereference at virtual address 00000025
      pgd = c0004000
      [00000025] *pgd=00000000
      Internal error: Oops: 5 [#1] SMP
      Modules linked in:
      CPU: 0    Tainted: G        W     (3.2.0-rc5-00006-g402ecf4 #304)
      PC is at omap_vp_init+0x5c/0x14c
      LR is at omap_vp_init+0x54/0x14c
    
    Fix this by using very minimal voltage domain definitions for AM3517/3505.
    
    Signed-off-by: Paul Walmsley <paul@pwsan.com>
    Cc: Igor Grinberg <grinberg@compulab.co.il>
    Cc: Kevin Hilman <khilman@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
  10. omap3: Increase limit on bootarg 'mpurate'

    Sanjeev Premi committed with koenkooi Apr 29, 2010
    The value of mpurate is currently expected to be less
    than 1000 when specified in MHz.
    
    This patch raises this limit to 2000 to support 1GHz
    capable processors. The new limit should be reasonable
    for quite some time.
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  11. ti-st/st-kim: fixing firmware path

    rsalveti committed with koenkooi Oct 25, 2011
    Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
  12. panda enable bluetooth

    RobertCNelson committed with koenkooi Mar 16, 2012
    The PandaBoard features a Texas Instruments WiLink7 Bluetooth
    chip, supported by the "btwilink" driver. The "uim" deamon
    requires sysfs entries that are filled in using this platform data.
    
    Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  13. panda: fix wl12xx regulator

    RobertCNelson committed with koenkooi Aug 3, 2011
    pulled from: http://elinux.org/Panda_How_to_kernel_3_0_rel
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  14. omap3: touchbook: drop u-boot readonly

    RobertCNelson committed with koenkooi Feb 25, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  15. omap3: touchbook: remove mmc gpio_wp

    RobertCNelson committed with koenkooi Feb 25, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  16. arm: omap: devkit8000: for lcd use samsung_lte_panel

    RobertCNelson committed with koenkooi Nov 2, 2010
    This was noticed by Robert Skretkowicz
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  17. ASoC: omap: convert per-board modules to platform drivers

    RobertCNelson committed with koenkooi Jan 3, 2012
    This converts the per-board modules to platform drivers for a
    device created by in main platform setup.  These drivers call
    snd_soc_register_card() directly instead of going via a "soc-audio"
    device and the corresponding driver in soc-core.
    
    Signed-off-by: Mans Rullgard <mans.rullgard at linaro.org>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  18. ASoC: omap: add MODULE_ALIAS to mcbsp and pcm drivers

    RobertCNelson committed with koenkooi Jan 3, 2012
    This adds MODULE_ALIAS directives to the omap-mcbsp-dai and
    omap-pcm-audio drivers so they can be auto-loaded when platform
    devices are scanned.
    
    Signed-off-by: Mans Rullgard <mans.rullgard at linaro.org>
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  19. expansion: add wifi

    RobertCNelson committed with koenkooi Apr 16, 2012
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  20. tlc59108: adjust for beagleboard+uLCD7

    koenkooi committed Apr 27, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  21. backlight: Add TLC59108 backlight control driver

    Manjunathappa, Prakash committed with koenkooi Aug 1, 2011
    This patch adds support for I2C configurable TLC59108 backlight
    control driver.
    
    Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
    Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
  22. default to fifo mode 5, for old musb beagles

    RobertCNelson committed with koenkooi Jan 8, 2011
    The fifo mode 4, 16kb can cause corruption on musb/omap35xx,
    use mode 5, 8kb...
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  23. beagleboard: fix uLCD7 support

    koenkooi committed Apr 27, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  24. meego: modedb add Toshiba LTA070B220F 800x480 support

    RobertCNelson committed with koenkooi Mar 23, 2011
     from http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  25. Turn on the USB regulator on Beagle xM explicitly

    RobertCNelson committed with koenkooi Feb 23, 2012
     Turn on the USB regulator on Beagle xM explicitly when the USB
     subsystem asks for it, rather than relying on u-boot to do it.
    
     http://www.spinics.net/lists/linux-omap/msg65102.html
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  26. beagleboard: reinstate usage of hi-speed PLL divider

    koenkooi committed Jan 25, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  27. expansion: add ulcd

    RobertCNelson committed with koenkooi Mar 16, 2012
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  28. expansion: add trainer

    RobertCNelson committed with koenkooi Oct 10, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  29. expansion: add zippy2

    RobertCNelson committed with koenkooi Oct 10, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  30. expansion: add zippy

    RobertCNelson committed with koenkooi Oct 10, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  31. expansion: add mmc regulator and ds1307 rtc

    RobertCNelson committed with koenkooi Oct 10, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  32. expansion: add buddy param for expansionboard names

    RobertCNelson committed with koenkooi Oct 10, 2011
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  33. omap: mmc: Adjust dto to eliminate timeout errors

    sakoman committed with koenkooi Jan 12, 2011
    A number of SD card types were experiencing timeout errors.  This
    could also lead to data corruption in some cases.
    
    This fix proposed by Sukumar Ghoral of TI.
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  34. video: add timings for hd720

    sakoman committed with koenkooi Dec 19, 2009
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
  35. OMAP: DSS2: add bootarg for selecting svideo

    sakoman committed with koenkooi Jan 20, 2010
     OMAP: DSS2: add bootarg for selecting svideo or composite for tv output
     also add pal-16 and ntsc-16 omapfb.mode settings for 16bpp
    
    Signed-off-by: Robert Nelson <robertcnelson@gmail.com>