Skip to content
Commits on Feb 23, 2012
  1. @koenkooi

    add defconfig

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Feb 23, 2012
  2. @koenkooi

    update bootlogo

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Feb 23, 2012
  3. @dwery @koenkooi

    beaglebone: add support for Towertech TT3201 CAN cape

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    dwery committed with koenkooi Feb 9, 2012
  4. @koenkooi

    beaglebone: use P8_6 (gpio1_3) as w1 bus

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Feb 7, 2012
  5. @koenkooi

    st7735fb: WIP framebuffer driver supporting Adafruit 1.8" SPI LCD

    Signed-off-by: Matt Porter <mporter@ti.com>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    Matt Porter committed with koenkooi Nov 21, 2011
  6. @koenkooi

    beaglebone: set default brightness to 50% for pwm backlights

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Feb 1, 2012
  7. @sakoman @koenkooi

    omap_hsmmc: Set dto to max value of 14 to avoid SD Card timeouts

    This fixes MMC errors due to timeouts on certain SD Cards following suggestions
    to set dto to 14 by Jason Kridner and Steven Kipisz
    
    Details of the issue:
    http://talk.maemo.org/showthread.php?p=1000707#post1000707
    
    This fix was originally proposed by Sukumar Ghoral of TI.
    sakoman committed with koenkooi Jul 18, 2011
  8. @koenkooi

    beaglebone: enable PWM for lcd backlight <- backlight is inverted

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jan 31, 2012
  9. @koenkooi

    AM335x: MUX: add ehrpwm1A

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jan 31, 2012
  10. @koenkooi

    beaglebone: fix ADC init

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jan 31, 2012
  11. @koenkooi

    tscadc: switch to polling instead of interrupts

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    Joel A Fernandes committed with koenkooi Nov 29, 2011
  12. @koenkooi

    meta-ti: Remove debug messages for meta-ti

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    Joel A Fernandes committed with koenkooi Nov 28, 2011
  13. @koenkooi

    tscadc: Trigger through sysfs

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    
    Conflicts:
    
    	drivers/input/touchscreen/ti_tscadc.c
    Joel A Fernandes committed with koenkooi Nov 28, 2011
  14. @koenkooi

    tscadc: make stepconfig channel-configurable

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    Joel A Fernandes committed with koenkooi Nov 28, 2011
  15. @koenkooi

    AM335X: init tsc bone style for new boards

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    Joel A Fernandes committed with koenkooi Nov 30, 2011
  16. @koenkooi

    tscadc: Add board file mfd support, fix warning

    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    
    Conflicts:
    
    	arch/arm/mach-omap2/board-am335xevm.c
    Joel A Fernandes committed with koenkooi Nov 30, 2011
  17. @koenkooi

    tscadc: Add general purpose mode, untested with touchscreen functiona…

    …lity
    
    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
    
    Conflicts:
    
    	drivers/input/touchscreen/ti_tscadc.c
    	[Fixed by Koen - needs review]
    Joel A Fernandes committed with koenkooi Nov 30, 2011
  18. @koenkooi

    beaglebone: disable tsadc

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jan 31, 2012
  19. @koenkooi

    more beaglebone merges

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jan 31, 2012
  20. @koenkooi
  21. @koenkooi

    da8xx-fb: add DVI support for beaglebone

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Nov 3, 2011
  22. @koenkooi

    f_rndis: HACK around undefined variables

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Oct 7, 2011
  23. @gregkh @koenkooi

    Linux 3.2.6

    gregkh committed with koenkooi Feb 13, 2012
  24. @koenkooi

    powernow-k8: Fix indexing issue

    commit a8eb284 upstream.
    
    The driver uses the pstate number from the status register as index in
    its table of ACPI pstates (powernow_table). This is wrong as this is
    not a 1-to-1 mapping.
    
    For example we can have _PSS information to just utilize Pstate 0 and
    Pstate 4, ie.
    
      powernow-k8: Core Performance Boosting: on.
      powernow-k8:    0 : pstate 0 (2200 MHz)
      powernow-k8:    1 : pstate 4 (1400 MHz)
    
    In this example the driver's powernow_table has just 2 entries. Using
    the pstate number (4) as index into this table is just plain wrong.
    
    Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
    Signed-off-by: Dave Jones <davej@redhat.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Andreas Herrmann committed with koenkooi Jan 6, 2012
  25. @koenkooi

    powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB

    commit 201bf0f upstream.
    
    Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of
    the paranoia check. (assuming that the ACPI Pstate information is
    correct.)
    
    Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
    Signed-off-by: Dave Jones <davej@redhat.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Andreas Herrmann committed with koenkooi Jan 6, 2012
  26. @AxelLin @koenkooi

    mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb…

    …710_chip
    
    commit b5266ea upstream.
    
    Signed-off-by: Axel Lin <axel.lin@gmail.com>
    Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    AxelLin committed with koenkooi Feb 1, 2012
  27. @koenkooi

    zcache: fix deadlock condition

    commit 9256a47 upstream.
    
    I discovered this deadlock condition awhile ago working on RAMster
    but it affects zcache as well.  The list spinlock must be
    locked prior to the page spinlock and released after.  As
    a result, the page copy must also be done while the locks are held.
    
    Applies to 3.2.  Konrad, please push (via GregKH?)...
    this is definitely a bug fix so need not be pushed during
    a -rc0 window.
    
    Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
    Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Dan Magenheimer committed with koenkooi Jan 25, 2012
  28. @koenkooi

    zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.

    commit e8b4553 upstream.
    
    SWIZ_BITS > 8 results in a much larger number of "tmem_obj"
    allocations, likely one per page-placed-in-frontswap.  The
    tmem_obj is not huge (roughly 100 bytes), but it is large
    enough to add a not-insignificant memory overhead to zcache.
    
    The SWIZ_BITS=8  will get roughly the same lock contention
    without the space wastage.
    
    The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is
    the number of unique oids that be generated" (This concept is
    limited to frontswap's use of tmem).
    
    Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
    Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Dan Magenheimer committed with koenkooi Jan 23, 2012
  29. @koenkooi

    USB: add new zte 3g-dongle's pid to option.c

    commit 1608ea5 upstream.
    
    As ZTE have and will use more pid for new products this year,
    so we need to add some new zte 3g-dongle's pid on option.c ,
    and delete one pid 0x0154 because it use for mass-storage port.
    
    Signed-off-by: Rui li <li.rui27@zte.com.cn>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Rui li committed with koenkooi Jan 31, 2012
  30. @milon21 @koenkooi

    USB: usbserial: add new PID number (0xa951) to the ftdi driver

    commit 90451e6 upstream.
    
    Signed-off-by: Milan Kocian <milon@wq.cz>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    milon21 committed with koenkooi Feb 3, 2012
  31. @koenkooi

    usb: Skip PCI USB quirk handling for Netlogic XLP

    commit e4436a7 upstream.
    
    The Netlogic XLP SoC's on-chip USB controller appears as a PCI
    USB device, but does not need the EHCI/OHCI handoff done in
    usb/host/pci-quirks.c.
    
    The pci-quirks.c is enabled for all vendors and devices, and is
    enabled if USB and PCI are configured.
    
    If we do not skip the qurik handling on XLP, the readb() call in
    ehci_bios_handoff() will cause a crash since byte access is not
    supported for EHCI registers in XLP.
    
    Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
    Acked-by: Alan Stern <stern@rowland.harvard.edu>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Jayachandran C committed with koenkooi Jan 27, 2012
  32. @lindi2 @koenkooi

    usb: gadget: zero: fix bug in loopback autoresume handling

    commit 683da59 upstream.
    
    ab943a2 (USB: gadget: gadget zero uses new suspend/resume hooks)
    introduced a copy-paste error where f_loopback.c writes to a variable
    declared in f_sourcesink.c. This prevents one from creating gadgets
    that only have a loopback function.
    
    Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
    Signed-off-by: Felipe Balbi <balbi@ti.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    lindi2 committed with koenkooi Jan 29, 2012
  33. @morimoto @koenkooi

    usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()

    commit 9c0a835 upstream.
    
    The usb/ch9.h will be installed to /usr/include/linux,
    and be used from user space.
    But le16_to_cpu() is only defined for kernel code.
    Without this patch, user space compile will be broken.
    Special thanks to Stefan Becker
    
    Reported-by: Stefan Becker <chemobejk@gmail.com>
    Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    Signed-off-by: Felipe Balbi <balbi@ti.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    morimoto committed with koenkooi Jan 31, 2012
  34. @lwfinger @koenkooi

    staging: r8712u: Use asynchronous firmware loading

    commit 8c213fa upstream.
    
    In https://bugs.archlinux.org/task/27996, failure of driver r8712u is
    reported, with a timeout during module loading due to synchronous loading
    of the firmware. The code now uses request_firmware_nowait().
    
    Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    lwfinger committed with koenkooi Feb 5, 2012
  35. @lwfinger @koenkooi

    staging: r8712u: Add new Sitecom UsB ID

    commit 1793bf1 upstream.
    
    Add USB ID for SITECOM WLA-1000 V1 001 WLAN
    
    Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
    Reported-and-tested-by: Dario Lucia <dario.lucia@gmail.com>
    Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    lwfinger committed with koenkooi Jan 7, 2012
Something went wrong with that request. Please try again.