Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: linux-ti33x-ps…
Commits on May 17, 2012
  1. @koenkooi

    add defconfig

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. @koenkooi

    update bootlogo

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  3. @koenkooi

    cpsw,phy_device: demote PHY message to INFO

    koenkooi authored
    This keeps them from appearing on the screen when booting with 'quiet'
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  4. @denix0 @koenkooi

    arch/arm/boot/compressed: set default Asm architecture to armv7-a

    denix0 authored koenkooi committed
    This enables building compressed kernel with newer binutils-2.22 when kernel is
    built in Thumb2 mode. Otherwise it fails with the following Assembler error:
    
    | arch/arm/boot/compressed/head.S: Assembler messages:
    | arch/arm/boot/compressed/head.S:127: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
    | arch/arm/boot/compressed/head.S:134: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
    | arch/arm/boot/compressed/head.S:136: Error: selected processor does not support requested special purpose register -- `msr cpsr_c,r2'
    | make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
    | make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
    
    Signed-off-by: Denys Dmytriyenko <denys@ti.com>
  5. @koenkooi

    omap hwmod: silence st_shift error

    koenkooi authored
    During boot the following error is shown:
    
    	[    0.545227] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
    
    Since this PSP tree will never run on omap4 remove the print so people will stop getting scared by it.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  6. @koenkooi

    st7735fb: Working WIP changes to make DMA safe and add endian fix

    Matt Porter authored koenkooi committed
    This removes the "from the stack" allocation of 1 byte buffers
    that was a temporary thing and isn't dma safe. Now vmallocs the
    user buffer to be deferred I/O safe and kmallocs a swapped
    shadow buffer to support the byte swabbing hack to fix userspace
    limitations.
    
    The buffer allocation and endian hack code needs some serious
    cleanup as on big endian systems if would fail miserably atm.
    However, the LE path works for the moment so people can do something
    with the driver.
    
    Signed-off-by: Matt Porter <mporter@ti.com>
  7. @koenkooi

    beaglebone: export SPI2 as spidev when no capes are using SPI

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  8. @modmaker @koenkooi

    ARM: OMAP: Mux: Fixed debugfs mux output (always reporting pins as ou…

    modmaker authored koenkooi committed
    …tput)
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  9. @robkell @koenkooi
  10. @modmaker @koenkooi

    Beaglebone: Added missing termination record to bone_pin_mux data.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  11. @modmaker @koenkooi

    Beaglebone: Fixed compiletime warnings.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  12. @koenkooi

    beaglebone: enable LEDs for DVI, LCD3 and LCD7 capes

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  13. @koenkooi

    beaglebone: add support for DVI rev. A2 capes

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  14. @koenkooi

    beaglebone: add support for CAN and RS232 cape

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  15. @koenkooi

    beaglebone: connect batterycape GPIO to gpio-charger

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  16. @koenkooi

    beaglebone: fix 3.5" cape support

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  17. @koenkooi

    beaglebone: don't compare undefined characters, it makes strncomp fail

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  18. @koenkooi

    beaglebone: also report cape revision

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  19. @koenkooi

    beaglebone: fix ehrpwm backlight

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  20. @koenkooi

    beaglebone: decrease PWM frequency to old value, LCD7 doesn't like it

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  21. @koenkooi

    beaglebone: fix 3.5" lcd cape support

    koenkooi authored
    * proper timings
    * fix gpio conflict
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  22. @koenkooi

    beaglebone: fix direction of gpio-keys

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  23. @koenkooi

    beaglebone: add gpio-keys for lcd

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  24. @koenkooi

    beaglebone: add enter key for lcd7 cape

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  25. @koenkooi

    beaglebone: add gpio-keys for lcd7, add notes for missing functionali…

    koenkooi authored
    …ty for other capes
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  26. @koenkooi

    beaglebone: add more beagleboardtoys cape partnumbers

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  27. @dwery @koenkooi

    beaglebone: add support for Towertech TT3201 CAN cape

    dwery authored koenkooi committed
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  28. @koenkooi

    beaglebone: use P8_6 (gpio1_3) as w1 bus

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  29. @koenkooi

    st7735fb: WIP framebuffer driver supporting Adafruit 1.8" SPI LCD

    Matt Porter authored koenkooi committed
    Signed-off-by: Matt Porter <mporter@ti.com>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  30. @koenkooi

    beaglebone: set default brightness to 50% for pwm backlights

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  31. @sakoman @koenkooi

    omap_hsmmc: Set dto to max value of 14 to avoid SD Card timeouts

    sakoman authored koenkooi committed
    This fixes MMC errors due to timeouts on certain SD Cards following suggestions
    to set dto to 14 by Jason Kridner and Steven Kipisz
    
    Details of the issue:
    http://talk.maemo.org/showthread.php?p=1000707#post1000707
    
    This fix was originally proposed by Sukumar Ghoral of TI.
  32. @koenkooi

    beaglebone: enable PWM for lcd backlight <- backlight is inverted

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  33. @koenkooi

    AM335x: MUX: add ehrpwm1A

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  34. @koenkooi

    beaglebone: fix ADC init

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  35. @koenkooi

    tscadc: switch to polling instead of interrupts

    Joel A Fernandes authored koenkooi committed
    Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Something went wrong with that request. Please try again.