Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
branch: linux-ti33x-ps…
Commits on May 24, 2012
  1. @koenkooi

    add defconfig

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. @koenkooi

    update bootlogo

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Commits on May 23, 2012
  1. @koenkooi

    beaglebone: always execute the pin free checks

    koenkooi authored
    This code needs to run when there are no capes and when there are capes present.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. @koenkooi
  3. @aditya-nellutla @koenkooi

    da8xx-fb: Rounding FB size to satisfy SGX buffer requirements

    aditya-nellutla authored koenkooi committed
    In the real time use-case when SGX is used for rendering to FB buffers it has been
    observed that, the available memory from framebuffer driver is not sufficient for
    SGX under certain cases (like 16-bit WVGA resolution). SGX requires 2 swap buffers
    with each of the buffers aligned to lcm(line_length, PAGE_SIZE).
    
    Inorder to satisfy this requirement, we have two options,
    
    	- Increase number of FB buffers (LCD_NUM_BUFFERS) to 3. This is not
    	  recommended as we end up wasting huge memory in most of the cases.
    
    	- Align FB buffers to lcm(line_length, PAGE_SIZE).This ensures framebuffer
    	  size is increased to satisfy SGX requirements keeping alignment intact.
    
    This patch makes sure that FB allocates buffers aligned to above formula.
    
    Signed-off-by: Aditya Nellutla <aditya.n@ti.com>
  4. @koenkooi

    beaglebone: make uart2 pinmux match the uart0 pinmux

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  5. @koenkooi

    beaglebone: switch RS232 cape to ttyO2

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  6. @koenkooi

    beaglebone: fix pin-free thinko, this method doesn't get called when …

    koenkooi authored
    …there's a cape at 0x57
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  7. @koenkooi

    beaglebone: annotate default beaglebone pinmux

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  8. @adpacifico @koenkooi

    i2c-prescalar-fix: i2c: fixed prescalar setting issue

    adpacifico authored koenkooi committed
    Applied Steve's i2c prescalar fix patches.
    See https://groups.google.com/d/msg/beagleboard/Q1pDr1lT7Gk/jvxOxgg8_2MJ
    
    Signed-off-by: Al Pacifico <adpacifico@users.sourceforge.net>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  9. @modmaker @koenkooi

    Added check on EEPROM revision to prevent interpreting unknown formats.

    modmaker authored koenkooi committed
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  10. @modmaker @koenkooi

    Workaround for EEPROM contents blocking further I2C bus access.

    modmaker authored koenkooi committed
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  11. @modmaker @koenkooi

    Workaround for boards with (mistaken) ASCII interpretation for the nu…

    modmaker authored koenkooi committed
    …mpins field.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  12. @modmaker @koenkooi

    Replaced conditional debug code by pr_debug statements for cleaner code.

    modmaker authored koenkooi committed
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  13. @modmaker @koenkooi

    Implemented Bone Cape configuration from EEPROM. Only used for BEBOPR…

    modmaker authored koenkooi committed
    … cape for now.
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  14. @modmaker @koenkooi

    Fixed size of pinmux data array in EEPROM data struct.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  15. @koenkooi

    ts_tscadc: switch to 4x oversampling

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  16. @koenkooi

    ts_tscadc: add defines for 4x and 16x oversampling

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  17. @modmaker @koenkooi
  18. @modmaker @koenkooi

    Adding many of the missing signals to the mux table.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  19. @koenkooi

    beaglebone: add stub for the camera cape to disable w1-gpio

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  20. @koenkooi

    beaglebone: allow capes to disable w1-gpio

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  21. @koenkooi

    beaglebone: add support for 7" LCD cape revision A2

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  22. @koenkooi

    cpsw,phy_device: demote PHY message to INFO

    koenkooi authored
    This keeps them from appearing on the screen when booting with 'quiet'
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  23. @koenkooi

    omap hwmod: silence st_shift error

    koenkooi authored
    During boot the following error is shown:
    
    	[    0.545227] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
    
    Since this PSP tree will never run on omap4 remove the print so people will stop getting scared by it.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  24. @koenkooi

    st7735fb: Working WIP changes to make DMA safe and add endian fix

    Matt Porter authored koenkooi committed
    This removes the "from the stack" allocation of 1 byte buffers
    that was a temporary thing and isn't dma safe. Now vmallocs the
    user buffer to be deferred I/O safe and kmallocs a swapped
    shadow buffer to support the byte swabbing hack to fix userspace
    limitations.
    
    The buffer allocation and endian hack code needs some serious
    cleanup as on big endian systems if would fail miserably atm.
    However, the LE path works for the moment so people can do something
    with the driver.
    
    Signed-off-by: Matt Porter <mporter@ti.com>
  25. @koenkooi

    beaglebone: export SPI2 as spidev when no capes are using SPI

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  26. @modmaker @koenkooi

    ARM: OMAP: Mux: Fixed debugfs mux output (always reporting pins as ou…

    modmaker authored koenkooi committed
    …tput)
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  27. @robkell @koenkooi
  28. @modmaker @koenkooi

    Beaglebone: Added missing termination record to bone_pin_mux data.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  29. @modmaker @koenkooi

    Beaglebone: Fixed compiletime warnings.

    modmaker authored koenkooi committed
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  30. @koenkooi

    beaglebone: enable LEDs for DVI, LCD3 and LCD7 capes

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  31. @koenkooi

    beaglebone: add support for DVI rev. A2 capes

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  32. @koenkooi

    beaglebone: add support for CAN and RS232 cape

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  33. @koenkooi

    beaglebone: connect batterycape GPIO to gpio-charger

    koenkooi authored
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Something went wrong with that request. Please try again.