Permalink
Switch branches/tags
Commits on Jun 5, 2012
  1. add defconfig

    koenkooi committed Jun 5, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  2. update bootlogo

    koenkooi committed Jun 5, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  3. beaglebone: add support for LCD3 rev A1

    koenkooi committed Jun 4, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  4. beaglebone: add support for the 4.3" lcd cape with resistive touchscreen

    koenkooi committed May 29, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  5. video: da8xx-fb: Add Newhaven LCD Panel details

    patilrachna authored and koenkooi committed Apr 26, 2012
    This patch adds details for Newhaven display Panel.
    This panel is used on AM335x EVM-SK An upcoming TI EVM.
    
    Signed-off-by: Patil, Rachna <rachna@ti.com>
    
    Conflicts:
    
    	drivers/video/da8xx-fb.c
  6. beaglebone: disable OPP for 275MHz due to silicon errata

    koenkooi committed May 28, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  7. ti_tscadc: switch to 16x averaging

    koenkooi committed May 28, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  8. beaglebone: always execute the pin free checks

    koenkooi committed May 23, 2012
    This code needs to run when there are no capes and when there are capes present.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  9. da8xx-fb: Rounding FB size to satisfy SGX buffer requirements

    aditya-nellutla authored and koenkooi committed Mar 29, 2012
    In the real time use-case when SGX is used for rendering to FB buffers it has been
    observed that, the available memory from framebuffer driver is not sufficient for
    SGX under certain cases (like 16-bit WVGA resolution). SGX requires 2 swap buffers
    with each of the buffers aligned to lcm(line_length, PAGE_SIZE).
    
    Inorder to satisfy this requirement, we have two options,
    
    	- Increase number of FB buffers (LCD_NUM_BUFFERS) to 3. This is not
    	  recommended as we end up wasting huge memory in most of the cases.
    
    	- Align FB buffers to lcm(line_length, PAGE_SIZE).This ensures framebuffer
    	  size is increased to satisfy SGX requirements keeping alignment intact.
    
    This patch makes sure that FB allocates buffers aligned to above formula.
    
    Signed-off-by: Aditya Nellutla <aditya.n@ti.com>
  10. beaglebone: make uart2 pinmux match the uart0 pinmux

    koenkooi committed May 22, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  11. beaglebone: switch RS232 cape to ttyO2

    koenkooi committed May 22, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  12. beaglebone: fix pin-free thinko, this method doesn't get called when …

    koenkooi committed May 22, 2012
    …there's a cape at 0x57
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  13. beaglebone: annotate default beaglebone pinmux

    koenkooi committed May 22, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  14. i2c-prescalar-fix: i2c: fixed prescalar setting issue

    adpacifico authored and koenkooi committed May 21, 2012
    Applied Steve's i2c prescalar fix patches.
    See https://groups.google.com/d/msg/beagleboard/Q1pDr1lT7Gk/jvxOxgg8_2MJ
    
    Signed-off-by: Al Pacifico <adpacifico@users.sourceforge.net>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  15. Added check on EEPROM revision to prevent interpreting unknown formats.

    modmaker authored and koenkooi committed May 15, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  16. Workaround for EEPROM contents blocking further I2C bus access.

    modmaker authored and koenkooi committed May 14, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  17. Workaround for boards with (mistaken) ASCII interpretation for the nu…

    modmaker authored and koenkooi committed May 14, 2012
    …mpins field.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  18. Replaced conditional debug code by pr_debug statements for cleaner code.

    modmaker authored and koenkooi committed May 14, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  19. Implemented Bone Cape configuration from EEPROM. Only used for BEBOPR…

    modmaker authored and koenkooi committed May 13, 2012
    … cape for now.
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  20. Fixed size of pinmux data array in EEPROM data struct.

    modmaker authored and koenkooi committed May 13, 2012
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  21. ts_tscadc: switch to 4x oversampling

    koenkooi committed May 19, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  22. ts_tscadc: add defines for 4x and 16x oversampling

    koenkooi committed May 19, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  23. Adding many of the missing signals to the mux table.

    modmaker authored and koenkooi committed May 13, 2012
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
  24. beaglebone: add stub for the camera cape to disable w1-gpio

    koenkooi committed May 18, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  25. beaglebone: allow capes to disable w1-gpio

    koenkooi committed May 18, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  26. beaglebone: add support for 7" LCD cape revision A2

    koenkooi committed May 18, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  27. cpsw,phy_device: demote PHY message to INFO

    koenkooi committed May 17, 2012
    This keeps them from appearing on the screen when booting with 'quiet'
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  28. omap hwmod: silence st_shift error

    koenkooi committed May 16, 2012
    During boot the following error is shown:
    
    	[    0.545227] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
    
    Since this PSP tree will never run on omap4 remove the print so people will stop getting scared by it.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  29. st7735fb: Working WIP changes to make DMA safe and add endian fix

    Matt Porter authored and koenkooi committed Mar 29, 2012
    This removes the "from the stack" allocation of 1 byte buffers
    that was a temporary thing and isn't dma safe. Now vmallocs the
    user buffer to be deferred I/O safe and kmallocs a swapped
    shadow buffer to support the byte swabbing hack to fix userspace
    limitations.
    
    The buffer allocation and endian hack code needs some serious
    cleanup as on big endian systems if would fail miserably atm.
    However, the LE path works for the moment so people can do something
    with the driver.
    
    Signed-off-by: Matt Porter <mporter@ti.com>
  30. beaglebone: export SPI2 as spidev when no capes are using SPI

    koenkooi committed May 14, 2012
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  31. ARM: OMAP: Mux: Fixed debugfs mux output (always reporting pins as ou…

    modmaker authored and koenkooi committed May 13, 2012
    …tput)
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
  32. Beaglebone: Added missing termination record to bone_pin_mux data.

    modmaker authored and koenkooi committed May 13, 2012
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>