Permalink
Commits on Jul 3, 2012
  1. Enable TSC for Beaglebone board

    Liam McLoughlin committed Jul 3, 2012
Commits on Jun 7, 2012
  1. @koenkooi

    add defconfig

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 7, 2012
  2. @koenkooi

    update bootlogo

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 7, 2012
  3. @koenkooi

    beaglebone: fix buttons/spidev clash when using mcasp0_axr0.gpio3_16

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 6, 2012
  4. @koenkooi

    beaglebone: add support for LCD3 rev A1

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 4, 2012
  5. @koenkooi

    beaglebone: add support for the 4.3" lcd cape with resistive touchscreen

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 29, 2012
  6. @patilrachna @koenkooi

    video: da8xx-fb: Add Newhaven LCD Panel details

    This patch adds details for Newhaven display Panel.
    This panel is used on AM335x EVM-SK An upcoming TI EVM.
    
    Signed-off-by: Patil, Rachna <rachna@ti.com>
    
    Conflicts:
    
    	drivers/video/da8xx-fb.c
    patilrachna committed with koenkooi Apr 26, 2012
  7. @koenkooi

    beaglebone: disable OPP for 275MHz due to silicon errata

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 28, 2012
  8. @koenkooi

    ti_tscadc: switch to 16x averaging

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 28, 2012
  9. @koenkooi

    beaglebone: always execute the pin free checks

    This code needs to run when there are no capes and when there are capes present.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 23, 2012
  10. @koenkooi
  11. @aditya-nellutla @koenkooi

    da8xx-fb: Rounding FB size to satisfy SGX buffer requirements

    In the real time use-case when SGX is used for rendering to FB buffers it has been
    observed that, the available memory from framebuffer driver is not sufficient for
    SGX under certain cases (like 16-bit WVGA resolution). SGX requires 2 swap buffers
    with each of the buffers aligned to lcm(line_length, PAGE_SIZE).
    
    Inorder to satisfy this requirement, we have two options,
    
    	- Increase number of FB buffers (LCD_NUM_BUFFERS) to 3. This is not
    	  recommended as we end up wasting huge memory in most of the cases.
    
    	- Align FB buffers to lcm(line_length, PAGE_SIZE).This ensures framebuffer
    	  size is increased to satisfy SGX requirements keeping alignment intact.
    
    This patch makes sure that FB allocates buffers aligned to above formula.
    
    Signed-off-by: Aditya Nellutla <aditya.n@ti.com>
    aditya-nellutla committed with koenkooi Mar 29, 2012
  12. @koenkooi

    beaglebone: make uart2 pinmux match the uart0 pinmux

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  13. @koenkooi

    beaglebone: switch RS232 cape to ttyO2

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  14. @koenkooi

    beaglebone: fix pin-free thinko, this method doesn't get called when …

    …there's a cape at 0x57
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  15. @koenkooi

    beaglebone: annotate default beaglebone pinmux

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  16. @adpacifico @koenkooi

    i2c-prescalar-fix: i2c: fixed prescalar setting issue

    Applied Steve's i2c prescalar fix patches.
    See https://groups.google.com/d/msg/beagleboard/Q1pDr1lT7Gk/jvxOxgg8_2MJ
    
    Signed-off-by: Al Pacifico <adpacifico@users.sourceforge.net>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    adpacifico committed with koenkooi May 21, 2012
  17. @modmaker @koenkooi

    Added check on EEPROM revision to prevent interpreting unknown formats.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 15, 2012
  18. @modmaker @koenkooi

    Workaround for EEPROM contents blocking further I2C bus access.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  19. @modmaker @koenkooi

    Workaround for boards with (mistaken) ASCII interpretation for the nu…

    …mpins field.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  20. @modmaker @koenkooi

    Replaced conditional debug code by pr_debug statements for cleaner code.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  21. @modmaker @koenkooi

    Implemented Bone Cape configuration from EEPROM. Only used for BEBOPR…

    … cape for now.
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 13, 2012
  22. @modmaker @koenkooi

    Fixed size of pinmux data array in EEPROM data struct.

    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 13, 2012
  23. @koenkooi

    ts_tscadc: switch to 4x oversampling

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 19, 2012
  24. @koenkooi

    ts_tscadc: add defines for 4x and 16x oversampling

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 19, 2012
  25. @modmaker @koenkooi
  26. @modmaker @koenkooi

    Adding many of the missing signals to the mux table.

    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    modmaker committed with koenkooi May 13, 2012
  27. @koenkooi

    beaglebone: add stub for the camera cape to disable w1-gpio

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  28. @koenkooi

    beaglebone: allow capes to disable w1-gpio

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  29. @koenkooi

    beaglebone: add support for 7" LCD cape revision A2

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  30. @koenkooi

    cpsw,phy_device: demote PHY message to INFO

    This keeps them from appearing on the screen when booting with 'quiet'
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 17, 2012
  31. @koenkooi

    omap hwmod: silence st_shift error

    During boot the following error is shown:
    
    	[    0.545227] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
    
    Since this PSP tree will never run on omap4 remove the print so people will stop getting scared by it.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 16, 2012
  32. @koenkooi

    st7735fb: Working WIP changes to make DMA safe and add endian fix

    This removes the "from the stack" allocation of 1 byte buffers
    that was a temporary thing and isn't dma safe. Now vmallocs the
    user buffer to be deferred I/O safe and kmallocs a swapped
    shadow buffer to support the byte swabbing hack to fix userspace
    limitations.
    
    The buffer allocation and endian hack code needs some serious
    cleanup as on big endian systems if would fail miserably atm.
    However, the LE path works for the moment so people can do something
    with the driver.
    
    Signed-off-by: Matt Porter <mporter@ti.com>
    Matt Porter committed with koenkooi Mar 29, 2012
  33. @koenkooi

    beaglebone: export SPI2 as spidev when no capes are using SPI

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 14, 2012
  34. @modmaker @koenkooi

    ARM: OMAP: Mux: Fixed debugfs mux output (always reporting pins as ou…

    …tput)
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 13, 2012