Permalink
Commits on Jul 24, 2012
  1. Remove a couple compressed kernel images

    Liam McLoughlin committed Jul 23, 2012
Commits on Jul 3, 2012
  1. Add AM335X firmware

    Liam McLoughlin committed Jul 3, 2012
  2. Enable firmware building

    Liam McLoughlin committed Jul 3, 2012
  3. Adding Beaglebone defconfig

    Liam McLoughlin committed Jul 3, 2012
  4. Enable TSC for Beaglebone board

    Liam McLoughlin committed Jul 3, 2012
Commits on Jun 7, 2012
  1. add defconfig

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 7, 2012
  2. update bootlogo

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 7, 2012
  3. beaglebone: fix buttons/spidev clash when using mcasp0_axr0.gpio3_16

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 6, 2012
  4. beaglebone: add support for LCD3 rev A1

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed Jun 4, 2012
  5. beaglebone: add support for the 4.3" lcd cape with resistive touchscreen

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 29, 2012
  6. video: da8xx-fb: Add Newhaven LCD Panel details

    This patch adds details for Newhaven display Panel.
    This panel is used on AM335x EVM-SK An upcoming TI EVM.
    
    Signed-off-by: Patil, Rachna <rachna@ti.com>
    
    Conflicts:
    
    	drivers/video/da8xx-fb.c
    patilrachna committed with koenkooi Apr 26, 2012
  7. beaglebone: disable OPP for 275MHz due to silicon errata

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 28, 2012
  8. ti_tscadc: switch to 16x averaging

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 28, 2012
  9. beaglebone: always execute the pin free checks

    This code needs to run when there are no capes and when there are capes present.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 23, 2012
  10. da8xx-fb: Rounding FB size to satisfy SGX buffer requirements

    In the real time use-case when SGX is used for rendering to FB buffers it has been
    observed that, the available memory from framebuffer driver is not sufficient for
    SGX under certain cases (like 16-bit WVGA resolution). SGX requires 2 swap buffers
    with each of the buffers aligned to lcm(line_length, PAGE_SIZE).
    
    Inorder to satisfy this requirement, we have two options,
    
    	- Increase number of FB buffers (LCD_NUM_BUFFERS) to 3. This is not
    	  recommended as we end up wasting huge memory in most of the cases.
    
    	- Align FB buffers to lcm(line_length, PAGE_SIZE).This ensures framebuffer
    	  size is increased to satisfy SGX requirements keeping alignment intact.
    
    This patch makes sure that FB allocates buffers aligned to above formula.
    
    Signed-off-by: Aditya Nellutla <aditya.n@ti.com>
    aditya-nellutla committed with koenkooi Mar 29, 2012
  11. beaglebone: make uart2 pinmux match the uart0 pinmux

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  12. beaglebone: switch RS232 cape to ttyO2

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  13. beaglebone: fix pin-free thinko, this method doesn't get called when …

    …there's a cape at 0x57
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  14. beaglebone: annotate default beaglebone pinmux

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 22, 2012
  15. i2c-prescalar-fix: i2c: fixed prescalar setting issue

    Applied Steve's i2c prescalar fix patches.
    See https://groups.google.com/d/msg/beagleboard/Q1pDr1lT7Gk/jvxOxgg8_2MJ
    
    Signed-off-by: Al Pacifico <adpacifico@users.sourceforge.net>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    adpacifico committed with koenkooi May 21, 2012
  16. Added check on EEPROM revision to prevent interpreting unknown formats.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 15, 2012
  17. Workaround for EEPROM contents blocking further I2C bus access.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  18. Workaround for boards with (mistaken) ASCII interpretation for the nu…

    …mpins field.
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  19. Replaced conditional debug code by pr_debug statements for cleaner code.

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 14, 2012
  20. Implemented Bone Cape configuration from EEPROM. Only used for BEBOPR…

    … cape for now.
    
    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 13, 2012
  21. Fixed size of pinmux data array in EEPROM data struct.

    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    modmaker committed with koenkooi May 13, 2012
  22. ts_tscadc: switch to 4x oversampling

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 19, 2012
  23. ts_tscadc: add defines for 4x and 16x oversampling

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 19, 2012
  24. Adding many of the missing signals to the mux table.

    Signed-off-by: Bas Laarhoven <sjml@xs4all.nl>
    modmaker committed with koenkooi May 13, 2012
  25. beaglebone: add stub for the camera cape to disable w1-gpio

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  26. beaglebone: allow capes to disable w1-gpio

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  27. beaglebone: add support for 7" LCD cape revision A2

    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 18, 2012
  28. cpsw,phy_device: demote PHY message to INFO

    This keeps them from appearing on the screen when booting with 'quiet'
    
    Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
    koenkooi committed May 17, 2012