Skip to content
This repository

ERROR: failed to load symbols from... #41

Closed
starenka opened this Issue · 7 comments

5 participants

starenka Ayrton Araújo licaon-kter popcornmix Liam McLoughlin
starenka
root raspberrypi ~ # rpi-update 
Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
Performing self-update
ARM/GPU split is now defined in /boot/config.txt using the gpu_mem option!
We're running for the first time
Setting up firmware (this will take a few minutes)
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/misc/eeprom/eeprom_93cx6.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/hamradio/mkiss.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/hamradio/6pack.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/hamradio/yam.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/bonding/bonding.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/irda/irda-usb.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/net/irda/irtty-sir.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/videodev.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/wm8775.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/videobuf-vmalloc.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/videobuf2-core.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/videobuf2-memops.ko: Exec format error
ERROR: failed to load symbols from //lib/modules/3.2.27+/kernel/drivers/media/video/videobuf2-vmalloc.ko: Exec format error
Using HardFP libraries
If no errors appeared, your firmware was successfully setup
A reboot is needed to activate the new firmware

What does it mean? Is it safe to reboot?

Ayrton Araújo

@starenka Try to reinstall your video drivers.

starenka

:) New to this business, what do you mean by that? Since that error I get this every time:

root raspberrypi ~ # rpi-update                
Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
Performing self-update
ARM/GPU split is now defined in /boot/config.txt using the gpu_mem option!
Updating firmware (this will take a few minutes)
error: bad index file sha1 signature
fatal: index file corrupt
licaon-kter

delete /root/.rpi-firmware and /boot/.firmware_revision and then retry

starenka

same thing #41 (comment) :(

popcornmix
Collaborator

Is your sdcard full?

starenka

nope :(

pi raspberrypi ~ % df -h
Filesystem      Size  Used Avail Use% Mounted on
rootfs           15G  1.9G   13G  14% /
/dev/root        15G  1.9G   13G  14% /
devtmpfs        117M     0  117M   0% /dev
tmpfs            24M  240K   23M   2% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            47M     0   47M   0% /run/shm
/dev/mmcblk0p1   56M   17M   40M  30% /boot
/dev/sda1       111G   75G   30G  72% /mnt/bukit
popcornmix
Collaborator

Sounds like some sort of sdcard corruption.
If you start with a clean image, I expect it would work.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Something went wrong with that request. Please try again.