[Bug] Attached SSD will get a new name after power OFF and ON

[pmvamsi-coder]

Describe the bug
The storage attached to the Zimaboard gets a new storage name after each power on and off condition. Containers linked using this SSD are failing. External storage added from CasaOS web UI is not permanent.. the same SSD with the same name is added with -1 at last to the folder name every time the device restarts. Edited /etc/fstab file manually but the option from CasaOS UI is not working.
The issue was already mentioned at #700, but it was closed without being resolved.
To Reproduce
Steps to reproduce the behavior:
The problem repeats whenever the power is turned on and off.
Expected behavior
It should not create a new folder with some number suffix at the end for an already attached SSD whenever the power is turned on and off.

Screenshots

Desktop (please complete the following information):

• OS: linux
• CasaOS Version: 0.3.8
• Disk Total: 27712
• Disk Used: 13202
• System Info: [Debian GNU/Linux 11 \l Bit:64 Mem:7801M Core:4 Linux CasaOS 5.10.0-10-amd64 add widget #1 SMP Debian 5.10.84-1 (2021-12-08) x86_64 GNU/Linux]
• Remote Version: 0.3.8
• Browser: Safari
• Version: 16.1

[raller1028]

Sorry, we tried to reproduce this issue in v0.4.0 but it didn't happen, can you confirm if this issue still exists in v0.4.0? And you can try again with this command 'curl -fsSL https://get.casaos.io/update | sudo bash' to confirmif the issue is fixed?

[CosmoFox]

Sorry, we tried to reproduce this issue in v0.4.0 but it didn't happen, can you confirm if this issue still exists in v0.4.0? And you can try again with this command 'curl -fsSL https://get.casaos.io/update | sudo bash' to confirmif the issue is fixed?

Confirming. 0.4.0. Problem is here.

[pmvamsi-coder]

Sorry, we tried to reproduce this issue in v0.4.0 but it didn't happen, can you confirm if this issue still exists in v0.4.0? And you can try again with this command 'curl -fsSL https://get.casaos.io/update | sudo bash' to confirmif the issue is fixed?

Even after the update .. issue is there.

[LinkLeong]

You can try unplugging the hard drive and deleting all the wrong folders and try again. If the problem persists, please provide feedback on the hardware and disk information and access type

[pmvamsi-coder]

I have tried unplugging and re plug the hard disk several times but the same issue is there. Also I have shared the device info in the previous comments.
It's Zimaboard top model.

[CosmoFox]

I have tried unplugging and re plug the hard disk several times but the same issue is there. Also I have shared the device info in the previous comments. It's Zimaboard top model.

same situation. Unmounted, then unplugged m2 disk. Then back. Reboot. Problem is there.

[raller1028]

@pmvamsi-coder @CosmoFox Sorry, I didn't reproduce this issue in v0.4.0/v0.4.1, but we found that will become after version update, but this will only happen when we upgrade, ssd name will not be added after shutdown/reboot, can you try to upgrade to v0.4.1 and then reboot/shutdown 3 times to check if this problem still exist?

[CosmoFox]

@pmvamsi-coder @CosmoFox Sorry, I didn't reproduce this issue in v0.4.0/v0.4.1, but we found that will become after version update, but this will only happen when we upgrade, ssd name will not be added after shutdown/reboot, can you try to upgrade to v0.4.1 and then reboot/shutdown 3 times to check if this problem still exist?

At the moment I already have a clean installation of 0.4.1. The problem is no gone.

And also after the update from 0.4.0 to 0.4.1 the problem also disappeared.

[raller1028]

In version 0.4.1 you reproduced the problem by directly powering off reboot or using reboot command by terminal? Are there another actions to reproduce the problem?