Skip to content
master
Switch branches/tags
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
 
 
 
 
pub
 
 
src
 
 
 
 
 
 

MultiPlug.Ext.RasPi.Config

Raspberry Pi Configuration Extension for the MultiPlug .Net Edge Computing Platform.

Functionality

The functionality mirrors most of the functionality found in the command line tool raspi-config. Due to MultiPlug's browser based interface, visual setting haven't been included.

  • General overview - Raspberry Pi Model - OS Version, Hostname, Date and Time, Temperature and Disk Space.
  • Network - Hostname, static values for IP Address, IP 6 Address, Routers and Domain Name Servers for Eth0 and Wlan0, Wireless SSID and Passphrase.
  • Localisation - Wifi Country, Time, Time Zone, Date
  • Interfacing - Camera, SSH, VNC, SPI, I2C, Serial, 1-Wire, Remote GPIO
  • Performance - Temperature control via Fan
  • Boot - Desktop or CLI, Boot Order, Boot BOM Version
  • Memory - Current Disk and RAM usage
  • Users - Set user passwords
  • Hardware Attached On Top (HAT) Details
  • REST Json API for Temperature and Disk Space

Getting Started

These instructions will guide you the installation of the Extension on an instance of the MultiPlug .Net Edge Computing Platform.

Installing

See the Prerequisites at the end of this document to install MultiPlug.

Option 1 - Online

The Extension can be installed using the in-built MultiPlug installer located at http://multiplug.local/settings/add/ Replace multiplug.local for the IP Address of the MultiPlug instance you must have an connection to the internet to do this, see Option 2 if you don't.

Option 2 - Offline

Runtime

Screenshot

Image of MultiPlug.Ext.RasPi.Config

More Screenshots can be viewed on the Wiki

Application

The Extension can be accessed from: http://multiplug.local/extensions/multiplug.ext.raspi.config// Replace multiplug.local for the IP Address of the MultiPlug instance

Known Bugs

  • None

Prerequisites - Installing MultiPlug

The MultiPlug .Net Edge Computing Platform must be installed on Raspberry Pi OS.

Option 1 - Quick Start

Download multiplug.deb from https://apt.multiplug.app/multiplug.deb using the command:

wget https://apt.multiplug.app/multiplug.deb

Start the installation by using the command:

sudo apt-get install -f ./multiplug.deb

Option 2 - Install to get updates

This option will update MultiPlug during each system update detailed here.

Add the following line to /etc/apt/sources.list

deb [trusted=yes] https://apt.multiplug.app ./

Run the following command:

sudo apt update

To install MultiPlug run the following command:

sudo apt-get install multiplug

MultiPlug - Further reading

Authors

License

This project is licensed under the MIT License

Acknowledgments

  • Uses calls to raspi-config shell commands using undocumented nonint feature.
  • Uses Process Runner from Unosquare Swan (Stuff we all need).

Thanks for the support from:

  • Seemin Suleri
  • Julian Singh
  • Ian Rathbone
  • Julius Angwenyi
  • Brainboxes Ltd

About

An MultiPlug Extension to configure a Raspberry Pi using a web browser

Resources

Stars

Watchers

Forks