Permalink
Fetching contributors…
Cannot retrieve contributors at this time
1291 lines (1236 sloc) 84.8 KB
Localization
{
en-us
{
#autoLOC_DF_00001 = <<1>> has recovered from emergency thaw and resumed normal duties.
#autoLOC_DF_00002 = <<1>> has been emergency thawed and cannot perform duties for <<2>> minutes.
#autoLOC_DF_00003 = DeepFreeze
#autoLOC_DF_00004 = DeepFreeze Vessel Switch
#autoLOC_DF_00005 = DeepFreeze Vessel Switch Failed
#autoLOC_DF_00006 = DeepFreeze Kerbals
#autoLOC_DF_00007 = DeepFreeze Alarms
#autoLOC_DF_00008 = Close Window
#autoLOC_DF_00009 = Vessel
#autoLOC_DF_00010 = Vessel Name
#autoLOC_DF_00011 = Part
#autoLOC_DF_00012 = Part Name
#autoLOC_DF_00013 = Tmp
#autoLOC_DF_00014 = Part Temperature Status
#autoLOC_DF_00015 = EC
#autoLOC_DF_00016 = Electric Charge Status
#autoLOC_DF_00017 = R.T
#autoLOC_DF_00018 = Remote Tech Status
#autoLOC_DF_00019 = Alarms
#autoLOC_DF_00020 = Press the button for Kerbal Alarm Clock Alarms assigned to this part
#autoLOC_DF_00021 = LastUpd
#autoLOC_DF_00022 = The Time the part was last updated
#autoLOC_DF_00023 = TimeRem
#autoLOC_DF_00024 = Approx. time remaining before Electric Charge will run out
#autoLOC_DF_00025 = Vessel <<1>> is Over-Heating.
#autoLOC_DF_00026 = OFF
#autoLOC_DF_00027 = S/BY
#autoLOC_DF_00028 = OUT
#autoLOC_DF_00029 = Vesssel <<1>> is out of ElectricCharge.\n Situation Critical.
#autoLOC_DF_00030 = ALRT
#autoLOC_DF_00031 = Vessel <<1>> is almost out of ElectricCharge.
#autoLOC_DF_00032 = LOW
#autoLOC_DF_00033 = OK
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Alarm
#autoLOC_DF_00036 = Go to Alarms
#autoLOC_DF_00037 = There are currently no Frozen Kerbals
#autoLOC_DF_00038 = Kerbal Name
#autoLOC_DF_00039 = Profession
#autoLOC_DF_00040 = Thaw
#autoLOC_DF_00041 = Thaw this kerbal
#autoLOC_DF_00042 = Cannot thaw <<1>> from KSC. Vessel still exists <<2>> at <<3>>
#autoLOC_DF_00043 = Freeze
#autoLOC_DF_00044 = Freeze this kerbal
#autoLOC_DF_00045 = KAC Alarms
#autoLOC_DF_00046 = Resize Window
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> was stored frozen at KSC
#autoLOC_DF_00050 = Insufficient funds to thaw <<1>> at this time
#autoLOC_DF_00051 = <<1>> was found and thawed out
#autoLOC_DF_00052 = <<1>> was found and thawed out <<2>> funds deducted from account
#autoLOC_DF_00053 = Cannot thaw <<1>> vessel still exists <<2>> at <<3>>
#autoLOC_DF_00054 = Freezer Capacity
#autoLOC_DF_00055 = Total Frozen Kerbals
#autoLOC_DF_00056 = Freezer Space
#autoLOC_DF_00057 = Part is Full?
#autoLOC_DF_00058 = R/T Connection
#autoLOC_DF_00059 = Freezer Temp
#autoLOC_DF_00060 = Cabin Temperature
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = DeepFreeze Menu
#autoLOC_DF_00063 = EC p/Kerbal to run
#autoLOC_DF_00064 = \u0020p/min
#autoLOC_DF_00065 = Current EC Usage
#autoLOC_DF_00066 = \u0020p/sec
#autoLOC_DF_00067 = Glykerol Reqd. to Freeze
#autoLOC_DF_00068 = EC p/Kerbal to Frze/Thaw
#autoLOC_DF_00069 = \nCryopods: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Pod:<<1>>
#autoLOC_DF_00072 = Insufficient electric charge to monitor frozen kerbals.
#autoLOC_DF_00073 = \u0020Freezer Out of EC : Systems critical in <<1>> secs
#autoLOC_DF_00074 = <<1>> died due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00075 = Check Temperatures, Freezer getting hot
#autoLOC_DF_00076 = Warning!! Check Temperatures NOW, Freezer getting very hot
#autoLOC_DF_00077 = Temperature getting too hot for kerbals to remain frozen.
#autoLOC_DF_00078 = Freezer Over Temp : Systems critical in <<1>> secs
#autoLOC_DF_00079 = <<1>> died due to overheating, cannot keep frozen
#autoLOC_DF_00080 = Over Temperature - Emergency Thaw in Progress.
#autoLOC_DF_00081 = Insufficient electric charge to freeze kerbal
#autoLOC_DF_00082 = \u0020Cryopod - Charging: <<1>>
#autoLOC_DF_00083 = Insufficient Glykerol to freeze kerbal
#autoLOC_DF_00084 = Cannot Freeze while Temperature greater than <<1>>
#autoLOC_DF_00085 = Cannot Freeze while Crew Xfer in progress
#autoLOC_DF_00086 = Cannot run Freeze process on more than one Kerbal at a time
#autoLOC_DF_00087 = RemoteTech Detected. Press Freeze Again if you want to Freeze your Last Active Kerbal
#autoLOC_DF_00088 = An Active connection or Active Kerbal is Required On-Board to Initiate Thaw Process
#autoLOC_DF_00089 = Cannot freeze kerbal. Freezer is full
#autoLOC_DF_00090 = Cannot freeze kerbal at this time
#autoLOC_DF_00091 = Starting Freeze process
#autoLOC_DF_00092 = Freezing Aborted
#autoLOC_DF_00093 = <<1>> frozen
#autoLOC_DF_00094 = Insufficient electric charge to thaw kerbal
#autoLOC_DF_00095 = \u0020Cryopod - Charging:<<1>>
#autoLOC_DF_00096 = Cannot Thaw <<1>> Part is full
#autoLOC_DF_00097 = Cannot Thaw while Crew Xfer in progress
#autoLOC_DF_00098 = Cannot run Thaw process on more than one Kerbal at a time
#autoLOC_DF_00099 = Cannot thaw kerbal at this time
#autoLOC_DF_00100 = Code Error: Cannot thaw kerbal at this time, Check Log
#autoLOC_DF_00101 = Thawing Aborted
#autoLOC_DF_00102 = <<1>> thawed out
#autoLOC_DF_00103 = <<1>> was thawed out due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00104 = DeepFreezer mechanical failure
#autoLOC_DF_00105 = Vessel about to change, Aborting Thaw process
#autoLOC_DF_00106 = Vessel about to change, Aborting Freeze process
#autoLOC_DF_00107 = DeepFreeze Items
#autoLOC_DF_00108 = There is less than 5 units of Glykerol on-board for your DeepFreeze Freezers
#autoLOC_DF_00109 = A DeepFreeze Alarm event has occurred. Please Switch to <<1>> to execute.
#autoLOC_DF_00110 = DeepFreeze Alarm processing completed.
#autoLOC_DF_00111 = Name
#autoLOC_DF_00112 = Alarm Name
#autoLOC_DF_00113 = Alarm Type
#autoLOC_DF_00114 = KAC Alarm Type
#autoLOC_DF_00115 = Time Remain.
#autoLOC_DF_00116 = Time remaining before Alarm is triggered
#autoLOC_DF_00117 = There are currently no KAC alarms associated to a DeepFreeze vessel
#autoLOC_DF_00118 = Delete
#autoLOC_DF_00119 = Delete this KAC alarm completely
#autoLOC_DF_00120 = Modify
#autoLOC_DF_00121 = Modify this Alarm
#autoLOC_DF_00122 = Save
#autoLOC_DF_00123 = Save Alarm Changes
#autoLOC_DF_00124 = Cannot Save Alarm. No R/Tech Connection to vessel.
#autoLOC_DF_00125 = DeepFreeze Alarm changes Saved.
#autoLOC_DF_00126 = DeepFreeze Cannot Save alarm changes, Time is up.
#autoLOC_DF_00127 = Cancel
#autoLOC_DF_00128 = Cancel any changes
#autoLOC_DF_00129 = Name
#autoLOC_DF_00130 = The Kerbals Name
#autoLOC_DF_00131 = Trait
#autoLOC_DF_00132 = The Kerbals Profession
#autoLOC_DF_00133 = Thaw
#autoLOC_DF_00134 = Thaw this kerbal on alarm activation
#autoLOC_DF_00135 = Freeze
#autoLOC_DF_00136 = Freeze this kerbal on alarm activation
#autoLOC_DF_00137 = Modify
#autoLOC_DF_00138 = Modify this Alarms settings
#autoLOC_DF_00139 = Switch to Vessel
#autoLOC_DF_00140 = Not Now
#autoLOC_DF_00141 = Don't switch vessel now
#autoLOC_DF_00142 = Automatic Switch to vessel failed.\nPlease switch manually to vessel Immediately
#autoLOC_DF_00143 = Switch to DeepFreeze vessel required
#autoLOC_DF_00144 = DeepFreeze Options
#autoLOC_DF_00145 = ElectricCharge Required to run Freezers
#autoLOC_DF_00146 = If on, EC is required to run freezers
#autoLOC_DF_00147 = Fatal EC/Heat Option
#autoLOC_DF_00148 = If on Kerbals will die if EC runs out or it gets too hot
#autoLOC_DF_00149 = Non Fatal Comatose Time(in secs)
#autoLOC_DF_00150 = The time in seconds a kerbal is comatose\n if fatal EC / Heat option is off
#autoLOC_DF_00151 = AutoRecover Frozen Kerbals at KSC
#autoLOC_DF_00152 = If on, will AutoRecover Frozen Kerbals at the KSC\n and deduct the Cost from your funds
#autoLOC_DF_00153 = Cost to Thaw a Kerbal at KSC
#autoLOC_DF_00154 = Amt of currency Reqd to Freeze a Kerbal from the KSC
#autoLOC_DF_00155 = EC Reqd to Freeze/Thaw a Kerbal
#autoLOC_DF_00156 = Amt of ElecCharge Reqd to Freeze/Thaw a Kerbal.
#autoLOC_DF_00157 = Glykerol Reqd to Freeze a Kerbal
#autoLOC_DF_00158 = Amt of Glykerol used to Freeze a Kerbal,\nOverrides Part values.
#autoLOC_DF_00159 = DeepFreeze Temperatures
#autoLOC_DF_00160 = Get your calculator out.
#autoLOC_DF_00161 = Temps are in (K)elvin. (K) = (C)elcius + 273.15. (K) = ((F)arenheit + 459.67) × 5/9. Get your calculator out
#autoLOC_DF_00162 = Regulated Temperatures Required
#autoLOC_DF_00163 = If on, Regulated Temps apply to freeze\nand keep Kerbals Frozen.
#autoLOC_DF_00164 = Min. Temp. for Freezer to Freeze(K)
#autoLOC_DF_00165 = The minimum temperature (in Kelvin) for a Freezer\nto be able to Freeze a Kerbal.
#autoLOC_DF_00166 = Max. Temp. to keep Kerbals Frozen(K)
#autoLOC_DF_00167 = The maximum temperature (in Kelvin) for a Freezer\nto keep Kerbals frozen.
#autoLOC_DF_00168 = Heat generated per kerbal (kW/min)
#autoLOC_DF_00169 = Amount of thermal heat (kW) generated\nby equipment for each frozen kerbal per minute.
#autoLOC_DF_00170 = Heat generated freezer process(kW)
#autoLOC_DF_00171 = Amount of thermal heat (kW) generated\nwith each thaw/freeze process.
#autoLOC_DF_00172 = Show Part Temperatures in Kelvin
#autoLOC_DF_00173 = If on Part right click will show temp in Kelvin,\nif Off will show in Celcius.
#autoLOC_DF_00174 = DeepFreeze Misc.
#autoLOC_DF_00175 = Freezer Strip Lights On
#autoLOC_DF_00176 = Turn off if you do not want the internal\nfreezer strip lights to function.
#autoLOC_DF_00177 = ToolTips On
#autoLOC_DF_00178 = Turn the Tooltips on and off.
#autoLOC_DF_00179 = Editor Filter
#autoLOC_DF_00180 = Turn the DeepFreeze Editor filter Category on and off.
#autoLOC_DF_00181 = Use Stock App Launcher Icon
#autoLOC_DF_00182 = If on, the Stock Application launcher will be used,\nif off will use Blizzy Toolbar if installed.
#autoLOC_DF_00183 = Extra Debug Logging
#autoLOC_DF_00184 = Turn this On to capture lots of extra information\ninto the KSP log for reporting a problem.
#autoLOC_DF_00185 = CRY-0300 Cryonic Freezing Chamber
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Designed for long term storage of 1 kerbal. The CRY-0300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300 comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00188 = deepfreeze cryogenic freezer
#autoLOC_DF_00189 = CRY-0300R Cryonic Freezing Chamber
#autoLOC_DF_00190 = Designed for long term storage of 1 kerbal. The CRY-0300R uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300R comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300R also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00191 = CRY-1300 Cryonic Freezing Chamber
#autoLOC_DF_00192 = Designed for long term storage of up to 3 Kerbals. The CRY-1300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-1300 comes stocked with 15 units of Glykerol. CAUTION: The CRY-1300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00193 = CRY-2300 Cryonic Freezing Chamber
#autoLOC_DF_00194 = Designed for long term storage of up to 10 Kerbals. The CRY-2300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-2300 comes stocked with 50 units of Glykerol. CAUTION: The CRY-2300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00195 = RS-X20R Glykerol Container
#autoLOC_DF_00196 = The RS-X20R is a small-volume Radial Glykerol container, for all your Kerbal Freezing and Thawing needs. Brought to you by the good folks at REPOSoftTech. Warranty void if filled with Glykerol.
#autoLOC_DF_00197 = deepfreeze cryogenic freezer glykerol tank
#autoLOC_DF_00198 = Experts in the field of cryogenics, ergonomics and electrical equipment, the kerbals at REPOSoftTech are trying hard to keep all space fairing kerbals alive and their missions successful.
#autoLOC_DF_00199 = Freeze <<1>>
#autoLOC_DF_00200 = Thaw <<1>>
}
}
Localization
{
es-es
{
#autoLOC_DF_00001 = <<1>> se ha recuperado del deshielo de emergencia y ha reanudado las tareas normales.
#autoLOC_DF_00002 = <<1>> ha sido descongelado de emergencia y no puede realizar tareas por <<2>> minutos.
#autoLOC_DF_00003 = CongelaciónProfunda
#autoLOC_DF_00004 = Conmutador de nave CongelaciónProfunda
#autoLOC_DF_00005 = Fallo Conmutador de nave CongelaciónProfunda
#autoLOC_DF_00006 = CongelaciónProfunda de Kerbals
#autoLOC_DF_00007 = CongelaciónProfunda de Alarmas
#autoLOC_DF_00008 = Cerrar Ventana
#autoLOC_DF_00009 = Nave
#autoLOC_DF_00010 = Nombre de Nave
#autoLOC_DF_00011 = Parte
#autoLOC_DF_00012 = Nombre de parte
#autoLOC_DF_00013 = Tmp
#autoLOC_DF_00014 = Estado de temperatura de pieza
#autoLOC_DF_00015 = CE
#autoLOC_DF_00016 = Estado de carga eléctrica
#autoLOC_DF_00017 = T.R
#autoLOC_DF_00018 = Estado de Tecnología Remota
#autoLOC_DF_00019 = Alarmas
#autoLOC_DF_00020 = Presione el botón Alarmas de Kerbal Alarm Clock asignadas a esta parte
#autoLOC_DF_00021 = ÚltimaActu
#autoLOC_DF_00022 = Momento en que se actualizó la parte por última vez
#autoLOC_DF_00023 = TiempoRes
#autoLOC_DF_00024 = Aprox. Tiempo restante antes de que la carga eléctrica se agote
#autoLOC_DF_00025 = Nave <<1>> está sobrecalentada.
#autoLOC_DF_00026 = APAGADO
#autoLOC_DF_00027 = MANTÉN
#autoLOC_DF_00028 = FUERA
#autoLOC_DF_00029 = Nave <<1>> está sin carga eléctrica.\n Situación crítica.
#autoLOC_DF_00030 = ALRT
#autoLOC_DF_00031 = Nave <<1>> está casi fuera de carga eléctrica.
#autoLOC_DF_00032 = BAJO
#autoLOC_DF_00033 = OK
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Alarma
#autoLOC_DF_00036 = Ir a Alarmas
#autoLOC_DF_00037 = Actualmente no hay Kerbals congelados
#autoLOC_DF_00038 = Nombre Kerbal
#autoLOC_DF_00039 = Profesión
#autoLOC_DF_00040 = Deshielo
#autoLOC_DF_00041 = Descongele este kerbal
#autoLOC_DF_00042 = No se puede descongelar <<1>> desde KSC. La nave todavía existe <<2>> en <<3>>
#autoLOC_DF_00043 = Congelar
#autoLOC_DF_00044 = Congelar este kerbal
#autoLOC_DF_00045 = Alarmas KAC
#autoLOC_DF_00046 = Cambiar tamaño de ventana
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> se almacenó congelado en KSC
#autoLOC_DF_00050 = Fondos insuficientes para descongelar <<1>> en este momento
#autoLOC_DF_00051 = <<1>> fue encontrado y descongelado
#autoLOC_DF_00052 = <<1>> fue encontrado y descongelado <<2>> fondos deducidos de la cuenta
#autoLOC_DF_00053 = No se puede descongelar <<1>> La nave todavía existe <<2>> en <<3>>
#autoLOC_DF_00054 = Capacidad del Congelador
#autoLOC_DF_00055 = Total de Kerbales congelados
#autoLOC_DF_00056 = Espacio Congelador
#autoLOC_DF_00057 = ¿La parte está llena?
#autoLOC_DF_00058 = Conexión T/R
#autoLOC_DF_00059 = Tempt del congelador
#autoLOC_DF_00060 = Temperatura de cabina
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = Menu CongelaciónProfunda
#autoLOC_DF_00063 = CE p/Kerbal para funcionar
#autoLOC_DF_00064 = \u0020p/min
#autoLOC_DF_00065 = Uso actual de CE
#autoLOC_DF_00066 = \u0020p/seg
#autoLOC_DF_00067 = Glykerol Requd. para congelar
#autoLOC_DF_00068 = CE p/Kerbal para Congl/Deshelar
#autoLOC_DF_00069 = \nCriocápsulas: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Cápsula:<<1>>
#autoLOC_DF_00072 = Carga eléctrica insuficiente para monitorear los kerbales congelados.
#autoLOC_DF_00073 = \u0020Congelador sin CE : Sistemas críticos en <<1>> segs
#autoLOC_DF_00074 = <<1>> murió debido a la falta de carga eléctrica para ejecutar criogenia
#autoLOC_DF_00075 = Comprobar temperaturas, Congelador caliente
#autoLOC_DF_00076 = ¡¡Advertencia!! Revise las temperaturas AHORA, el congelador está muy caliente
#autoLOC_DF_00077 = Temperatura demasiado caliente para que los kerbals permanezcan congelados.
#autoLOC_DF_00078 = Congelador sobre temp : Sistemas críticos en <<1>> segs
#autoLOC_DF_00079 = <<1>> murió debido a sobrecalentamiento, no puede mantener congelado
#autoLOC_DF_00080 = Exceso de temperatura - Descongelación de emergencia en curso.
#autoLOC_DF_00081 = Carga eléctrica insuficiente para congelar kerbal
#autoLOC_DF_00082 = \u0020Criocápsula - Cargando: <<1>>
#autoLOC_DF_00083 = Glykerol insuficiente para congelar kerbal
#autoLOC_DF_00084 = No se puede congelar mientras la temperatura es mayor que <<1>>
#autoLOC_DF_00085 = No se puede congelar mientras hay en curso una transferencia
#autoLOC_DF_00086 = No se puede ejecutar el proceso de congelación en más de un Kerbal a la vez
#autoLOC_DF_00087 = Tencnología Remota detectada. Presione congelar de nuevo si desea congelar su último activo Kerbal
#autoLOC_DF_00088 = Se requiere una conexión activa o Kerbal activo a bordo para iniciar el proceso de descongelación
#autoLOC_DF_00089 = No se puede congelar kerbal. El congelador está lleno
#autoLOC_DF_00090 = No se puede congelar kerbal en este momento
#autoLOC_DF_00091 = Proceso de congelación inicial
#autoLOC_DF_00092 = Congelación Abortada
#autoLOC_DF_00093 = <<1>> congelado
#autoLOC_DF_00094 = Carga eléctrica insuficiente para descongelar kerbal
#autoLOC_DF_00095 = \u0020Criocápsula - Cargando:<<1>>
#autoLOC_DF_00096 = No se puede descongelar <<1>> La parte está llena
#autoLOC_DF_00097 = No se puede congelar mientras hay en curso una transferencia
#autoLOC_DF_00098 = No se puede ejecutar el proceso de descongelación en más de un Kerbal a la vez
#autoLOC_DF_00099 = No se puede descongelar kerbal en este momento
#autoLOC_DF_00100 = Error de código: No se puede descongelar kerbal en este momento, registro de verificación
#autoLOC_DF_00101 = Descongelación interrumpida
#autoLOC_DF_00102 = <<1>> descongelado
#autoLOC_DF_00103 = <<1>> fue descongelado debido a la falta de carga eléctrica para ejecutar criogenia
#autoLOC_DF_00104 = Falla mecánica del congelador
#autoLOC_DF_00105 = La nave está a punto de cambiar, Abortando el proceso de descongelación
#autoLOC_DF_00106 = La nave está a punto de cambiar, Abortando el proceso de congelación
#autoLOC_DF_00107 = Artículos CongelaciónProfunda
#autoLOC_DF_00108 = Hay menos de 5 unidades de Glykerol a bordo para sus congeladores DeepFreeze
#autoLOC_DF_00109 = Se ha producido un evento de alarma de CongelaciónProfunda. Por favor, cambie a <<1>> para ejecutar.
#autoLOC_DF_00110 = Proceso de alarma CongelaciónProfunda completado.
#autoLOC_DF_00111 = Nombre
#autoLOC_DF_00112 = Nombre Alarma
#autoLOC_DF_00113 = Tipo Alarma
#autoLOC_DF_00114 = Tipo Alarma KAC
#autoLOC_DF_00115 = Tiempo Restante.
#autoLOC_DF_00116 = Tiempo restante antes de que se active la alarma
#autoLOC_DF_00117 = Actualmente no hay alarmas KAC asociadas a una nave CongelaciónProfunda
#autoLOC_DF_00118 = Borrar
#autoLOC_DF_00119 = Eliminar completamente esta alarma KAC
#autoLOC_DF_00120 = Modificar
#autoLOC_DF_00121 = Modificar esta Alarma
#autoLOC_DF_00122 = Guardar
#autoLOC_DF_00123 = Guardar cambios de alarma
#autoLOC_DF_00124 = No se puede guardar la alarma. No hay conexión R/Tech con la nave.
#autoLOC_DF_00125 = Cambios de alarma CongelaciónProfunda guardados.
#autoLOC_DF_00126 = CongelaciónProfunda no puede guardar los cambios de alarma, el tiempo ha terminado.
#autoLOC_DF_00127 = Cancelar
#autoLOC_DF_00128 = Cancelar cualquier cambio
#autoLOC_DF_00129 = Nombre
#autoLOC_DF_00130 = Nombre de Kerbals
#autoLOC_DF_00131 = Rasgo
#autoLOC_DF_00132 = Profesión de Kerbals
#autoLOC_DF_00133 = Deshelar
#autoLOC_DF_00134 = Descongelar este kerbal en la activación de alarma
#autoLOC_DF_00135 = Congelar
#autoLOC_DF_00136 = Congelar este kerbal en la activación de alarma
#autoLOC_DF_00137 = Modificar
#autoLOC_DF_00138 = Modificar esta configuración de alarmas
#autoLOC_DF_00139 = Cambiar a nave
#autoLOC_DF_00140 = Ahora no
#autoLOC_DF_00141 = No cambiar de nave ahora
#autoLOC_DF_00142 = El cambio automático a nave falló.\nCambie manualmente a nave Inmediatamente
#autoLOC_DF_00143 = Cambiar a nave CongelaciónProfunda requerida
#autoLOC_DF_00144 = Opciones CongelaciónProfunda
#autoLOC_DF_00145 = Carga eléctrica requerida para hacer funcionar los congeladores
#autoLOC_DF_00146 = Si está encendido, se requiere CE para funcionar los congeladores
#autoLOC_DF_00147 = Fatal CE/Opción de calor
#autoLOC_DF_00148 = Si está encendido, el Kerbal va a morir Si CE se agota o calienta demasiado
#autoLOC_DF_00149 = Tiempo Comatoso No Fatal(en segs)
#autoLOC_DF_00150 = El tiempo en segundos que kerbal está comatoso\n si CE es fatal / Opción de calor está desactivada
#autoLOC_DF_00151 = Recuperación automática de Kerbals congelados en KSC
#autoLOC_DF_00152 = Si está encendido, Recuperará automáticamente los Kerbals congelados en el KSC\n y deducirá el Costo de sus fondos
#autoLOC_DF_00153 = Costo para descongelar un Kerbal en KSC
#autoLOC_DF_00154 = Cantidad de moneda Reqd para congelar un Kerbal de KSC
#autoLOC_DF_00155 = CE Reqd para congelar/descongelar un Kerbal
#autoLOC_DF_00156 = Cantidad de Carga Eléctrica Reqd para Congelar/Descongelar un Kerbal.
#autoLOC_DF_00157 = Glykerol Reqd para congelar un Kerbal
#autoLOC_DF_00158 = Cantidad de Glykerol usada para congelar un Kerbal,\nAnula valores de parte.
#autoLOC_DF_00159 = Temperaturas CongelaciónProfunda
#autoLOC_DF_00160 = Saca tu calculadora.
#autoLOC_DF_00161 = Las temperaturas están en (K)elvin. (K) = (C)elcius + 273.15. (K) = ((F)arenheit + 459.67) × 5/9. Saca tu calculadora
#autoLOC_DF_00162 = Temperaturas reguladas requeridas
#autoLOC_DF_00163 = Si está encendido, Temperaturas reguladas se aplican para congelar\ny mantener Kerbal congelado.
#autoLOC_DF_00164 = Min. Temperatura. Congelador para congelar(K)
#autoLOC_DF_00165 = La temperatura mínima (en Kelvin) para un congelador\nser capaz de congelar un Kerbal.
#autoLOC_DF_00166 = Max. Temperatura. Mantener Kerbals congelados(K)
#autoLOC_DF_00167 = La temperatura máxima (en Kelvin) para un congelador\npara mantener Kerbal congelado.
#autoLOC_DF_00168 = Calor generado por kerbal (kW/min)
#autoLOC_DF_00169 = Cantidad de calor térmico (kW) generado\npor equipo para cada Kerbal por minuto congelado.
#autoLOC_DF_00170 = Proceso de congelación generado por calor(kW)
#autoLOC_DF_00171 = Cantidad de calor térmico (kW) generado\ncon cada deshielo/proceso de congelación.
#autoLOC_DF_00172 = Mostrar temperaturas de pieza en Kelvin
#autoLOC_DF_00173 = Si está encendido, Clic derecho de la parte mostrará la temperatura en Kelvin,\nsi setá apagado, se mostrará en Celsius.
#autoLOC_DF_00174 = Misc CongelaciónProfunda.
#autoLOC_DF_00175 = Encender luces del congelador
#autoLOC_DF_00176 = Apague si no quiere que las luces\del congelador internas funcionen.
#autoLOC_DF_00177 = Info sobre sugerencias
#autoLOC_DF_00178 = Activar y desactivar las sugerencias.
#autoLOC_DF_00179 = Filtro del editor
#autoLOC_DF_00180 = Activar y desactivar categoría del filtro CongelaciónProfunda.
#autoLOC_DF_00181 = Icono del lanzador de aplicaciones Stock
#autoLOC_DF_00182 = Si está encendido, El lanzador de Aplicación Stock se utilizará,\nsi está desactivada, utilizará la barra de herramientas de Blizzy si está instalada.
#autoLOC_DF_00183 = Registro extra de depuración
#autoLOC_DF_00184 = Activar esta opción para capturar gran cantidad de información adicional\nen el registro KSP para informar de un problema.
#autoLOC_DF_00185 = CRY-0300 Cámara de congelación criónica
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Diseñado para el almacenamiento a largo plazo de 1 kerbal. El CRY-0300 utiliza Glykerol y carga eléctrica para congelar o descongelar un Kerbal. Asegúrese de que tiene suficiente capacidad de carga eléctrica en su nave. El CRY-0300 viene provisto de 10 unidades de Glykerol. PRECAUCIÓN: El CRY-0300 también requiere carga eléctrica por minuto por Kerbal para mantener su funcionamiento de sistemas de supervisión. Si no puede obtener esta carga eléctrica hay un riesgo de morir congelado.
#autoLOC_DF_00188 = Congelador criogénico congelaciónprofunda
#autoLOC_DF_00189 = CRY-0300R Cámara de congelación criónica
#autoLOC_DF_00190 = Diseñado para el almacenamiento a largo plazo de 1 kerbal. El CRY-0300R utiliza Glykerol y carga eléctrica para congelar o descongelar un Kerbal. Asegúrese de que tiene suficiente capacidad de carga eléctrica en su nave. El CRY-0300R viene provisto de 10 unidades de Glykerol. PRECAUCIÓN: El CRY-0300R también requiere carga eléctrica por minuto por Kerbal para mantener su funcionamiento de sistemas de supervisión. Si no puede obtener esta carga eléctrica hay un riesgo de morir congelado.
#autoLOC_DF_00191 = CRY-1300 Cámara de congelación criónica
#autoLOC_DF_00192 = Diseñado para el almacenamiento a largo plazo de 3 kerbals. El CRY-1300 utiliza Glykerol y carga eléctrica para congelar o descongelar un Kerbal. Asegúrese de que tiene suficiente capacidad de carga eléctrica en su nave. El CRY-1300 viene equipado con 15 unidades de Glykerol. PRECAUCIÓN: El CRY-1300 también requiere carga eléctrica por minuto por Kerbal para mantener su funcionamiento de sistemas de supervisión. Si no puede obtener esta carga eléctrica hay un riesgo de morir congelados.
#autoLOC_DF_00193 = CRY-2300 Cámara de congelación criónica
#autoLOC_DF_00194 = Diseñado para el almacenamiento a largo plazo de 10 kerbals. El CRY-2300 utiliza Glykerol y carga eléctrica para congelar o descongelar un Kerbal. Asegúrese de que tiene suficiente capacidad de carga eléctrica en su nave. El CRY-2300 viene abastecido con 50 unidades de Glykerol. PRECAUCIÓN: El CRY-2300 también requiere carga eléctrica por minuto por Kerbal para mantener su funcionamiento de los sistemas de supervisión. Si no puede obtener esta carga eléctrica hay un riesgo de morir congelados.
#autoLOC_DF_00195 = RS-X20R Contenedor de Glykerol
#autoLOC_DF_00196 = El RS-X20R es un contenedor Radial de Glykerol de pequeño volumen, para todas sus necesidades de congelación y descongelación Kerbal. Traído a usted por la gente buena en REPOSoftTech. Garantía anulada si se llena con Glykerol.
#autoLOC_DF_00197 = Tanque congelador criogénico de glicerol congelaciónprofunda
#autoLOC_DF_00198 = Expertos en el campo de la criogenia, Ergonomía y equipos eléctricos, Los kerbals de REPOSoftTech están intentando difícilmente mantener todos los carenados de kerbals del espacio vivos y sus misiones aseguradas.
#autoLOC_DF_00199 = Congelar <<1>>
#autoLOC_DF_00200 = Deshelar <<1>>
}
}
Localization
{
es-mx
{
#autoLOC_DF_00001 = <<1>> has recovered from emergency thaw and resumed normal duties.
#autoLOC_DF_00002 = <<1>> has been emergency thawed and cannot perform duties for <<2>> minutes.
#autoLOC_DF_00003 = DeepFreeze
#autoLOC_DF_00004 = DeepFreeze Vessel Switch
#autoLOC_DF_00005 = DeepFreeze Vessel Switch Failed
#autoLOC_DF_00006 = DeepFreeze Kerbals
#autoLOC_DF_00007 = DeepFreeze Alarms
#autoLOC_DF_00008 = Close Window
#autoLOC_DF_00009 = Vessel
#autoLOC_DF_00010 = Vessel Name
#autoLOC_DF_00011 = Part
#autoLOC_DF_00012 = Part Name
#autoLOC_DF_00013 = Tmp
#autoLOC_DF_00014 = Part Temperature Status
#autoLOC_DF_00015 = EC
#autoLOC_DF_00016 = Electric Charge Status
#autoLOC_DF_00017 = R.T
#autoLOC_DF_00018 = Remote Tech Status
#autoLOC_DF_00019 = Alarms
#autoLOC_DF_00020 = Press the button for Kerbal Alarm Clock Alarms assigned to this part
#autoLOC_DF_00021 = LastUpd
#autoLOC_DF_00022 = The Time the part was last updated
#autoLOC_DF_00023 = TimeRem
#autoLOC_DF_00024 = Approx. time remaining before Electric Charge will run out
#autoLOC_DF_00025 = Vessel <<1>> is Over-Heating.
#autoLOC_DF_00026 = OFF
#autoLOC_DF_00027 = S/BY
#autoLOC_DF_00028 = OUT
#autoLOC_DF_00029 = Vesssel <<1>> is out of ElectricCharge.\n Situation Critical.
#autoLOC_DF_00030 = ALRT
#autoLOC_DF_00031 = Vessel <<1>> is almost out of ElectricCharge.
#autoLOC_DF_00032 = LOW
#autoLOC_DF_00033 = OK
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Alarm
#autoLOC_DF_00036 = Go to Alarms
#autoLOC_DF_00037 = There are currently no Frozen Kerbals
#autoLOC_DF_00038 = Kerbal Name
#autoLOC_DF_00039 = Profession
#autoLOC_DF_00040 = Thaw
#autoLOC_DF_00041 = Thaw this kerbal
#autoLOC_DF_00042 = Cannot thaw <<1>> from KSC. Vessel still exists <<2>> at <<3>>
#autoLOC_DF_00043 = Freeze
#autoLOC_DF_00044 = Freeze this kerbal
#autoLOC_DF_00045 = KAC Alarms
#autoLOC_DF_00046 = Resize Window
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> was stored frozen at KSC
#autoLOC_DF_00050 = Insufficient funds to thaw <<1>> at this time
#autoLOC_DF_00051 = <<1>> was found and thawed out
#autoLOC_DF_00052 = <<1>> was found and thawed out <<2>> funds deducted from account
#autoLOC_DF_00053 = Cannot thaw <<1>> vessel still exists <<2>> at <<3>>
#autoLOC_DF_00054 = Freezer Capacity
#autoLOC_DF_00055 = Total Frozen Kerbals
#autoLOC_DF_00056 = Freezer Space
#autoLOC_DF_00057 = Part is Full?
#autoLOC_DF_00058 = R/T Connection
#autoLOC_DF_00059 = Freezer Temp
#autoLOC_DF_00060 = Cabin Temperature
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = DeepFreeze Menu
#autoLOC_DF_00063 = EC p/Kerbal to run
#autoLOC_DF_00064 = \u0020p/min
#autoLOC_DF_00065 = Current EC Usage
#autoLOC_DF_00066 = \u0020p/sec
#autoLOC_DF_00067 = Glykerol Reqd. to Freeze
#autoLOC_DF_00068 = EC p/Kerbal to Frze/Thaw
#autoLOC_DF_00069 = \nCryopods: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Pod:<<1>>
#autoLOC_DF_00072 = Insufficient electric charge to monitor frozen kerbals.
#autoLOC_DF_00073 = \u0020Freezer Out of EC : Systems critical in <<1>> secs
#autoLOC_DF_00074 = <<1>> died due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00075 = Check Temperatures, Freezer getting hot
#autoLOC_DF_00076 = Warning!! Check Temperatures NOW, Freezer getting very hot
#autoLOC_DF_00077 = Temperature getting too hot for kerbals to remain frozen.
#autoLOC_DF_00078 = Freezer Over Temp : Systems critical in <<1>> secs
#autoLOC_DF_00079 = <<1>> died due to overheating, cannot keep frozen
#autoLOC_DF_00080 = Over Temperature - Emergency Thaw in Progress.
#autoLOC_DF_00081 = Insufficient electric charge to freeze kerbal
#autoLOC_DF_00082 = \u0020Cryopod - Charging: <<1>>
#autoLOC_DF_00083 = Insufficient Glykerol to freeze kerbal
#autoLOC_DF_00084 = Cannot Freeze while Temperature greater than <<1>>
#autoLOC_DF_00085 = Cannot Freeze while Crew Xfer in progress
#autoLOC_DF_00086 = Cannot run Freeze process on more than one Kerbal at a time
#autoLOC_DF_00087 = RemoteTech Detected. Press Freeze Again if you want to Freeze your Last Active Kerbal
#autoLOC_DF_00088 = An Active connection or Active Kerbal is Required On-Board to Initiate Thaw Process
#autoLOC_DF_00089 = Cannot freeze kerbal. Freezer is full
#autoLOC_DF_00090 = Cannot freeze kerbal at this time
#autoLOC_DF_00091 = Starting Freeze process
#autoLOC_DF_00092 = Freezing Aborted
#autoLOC_DF_00093 = <<1>> frozen
#autoLOC_DF_00094 = Insufficient electric charge to thaw kerbal
#autoLOC_DF_00095 = \u0020Cryopod - Charging:<<1>>
#autoLOC_DF_00096 = Cannot Thaw <<1>> Part is full
#autoLOC_DF_00097 = Cannot Thaw while Crew Xfer in progress
#autoLOC_DF_00098 = Cannot run Thaw process on more than one Kerbal at a time
#autoLOC_DF_00099 = Cannot thaw kerbal at this time
#autoLOC_DF_00100 = Code Error: Cannot thaw kerbal at this time, Check Log
#autoLOC_DF_00101 = Thawing Aborted
#autoLOC_DF_00102 = <<1>> thawed out
#autoLOC_DF_00103 = <<1>> was thawed out due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00104 = DeepFreezer mechanical failure
#autoLOC_DF_00105 = Vessel about to change, Aborting Thaw process
#autoLOC_DF_00106 = Vessel about to change, Aborting Freeze process
#autoLOC_DF_00107 = DeepFreeze Items
#autoLOC_DF_00108 = There is less than 5 units of Glykerol on-board for your DeepFreeze Freezers
#autoLOC_DF_00109 = A DeepFreeze Alarm event has occurred. Please Switch to <<1>> to execute.
#autoLOC_DF_00110 = DeepFreeze Alarm processing completed.
#autoLOC_DF_00111 = Name
#autoLOC_DF_00112 = Alarm Name
#autoLOC_DF_00113 = Alarm Type
#autoLOC_DF_00114 = KAC Alarm Type
#autoLOC_DF_00115 = Time Remain.
#autoLOC_DF_00116 = Time remaining before Alarm is triggered
#autoLOC_DF_00117 = There are currently no KAC alarms associated to a DeepFreeze vessel
#autoLOC_DF_00118 = Delete
#autoLOC_DF_00119 = Delete this KAC alarm completely
#autoLOC_DF_00120 = Modify
#autoLOC_DF_00121 = Modify this Alarm
#autoLOC_DF_00122 = Save
#autoLOC_DF_00123 = Save Alarm Changes
#autoLOC_DF_00124 = Cannot Save Alarm. No R/Tech Connection to vessel.
#autoLOC_DF_00125 = DeepFreeze Alarm changes Saved.
#autoLOC_DF_00126 = DeepFreeze Cannot Save alarm changes, Time is up.
#autoLOC_DF_00127 = Cancel
#autoLOC_DF_00128 = Cancel any changes
#autoLOC_DF_00129 = Name
#autoLOC_DF_00130 = The Kerbals Name
#autoLOC_DF_00131 = Trait
#autoLOC_DF_00132 = The Kerbals Profession
#autoLOC_DF_00133 = Thaw
#autoLOC_DF_00134 = Thaw this kerbal on alarm activation
#autoLOC_DF_00135 = Freeze
#autoLOC_DF_00136 = Freeze this kerbal on alarm activation
#autoLOC_DF_00137 = Modify
#autoLOC_DF_00138 = Modify this Alarms settings
#autoLOC_DF_00139 = Switch to Vessel
#autoLOC_DF_00140 = Not Now
#autoLOC_DF_00141 = Don't switch vessel now
#autoLOC_DF_00142 = Automatic Switch to vessel failed.\nPlease switch manually to vessel Immediately
#autoLOC_DF_00143 = Switch to DeepFreeze vessel required
#autoLOC_DF_00144 = DeepFreeze Options
#autoLOC_DF_00145 = ElectricCharge Required to run Freezers
#autoLOC_DF_00146 = If on, EC is required to run freezers
#autoLOC_DF_00147 = Fatal EC/Heat Option
#autoLOC_DF_00148 = If on Kerbals will die if EC runs out or it gets too hot
#autoLOC_DF_00149 = Non Fatal Comatose Time(in secs)
#autoLOC_DF_00150 = The time in seconds a kerbal is comatose\n if fatal EC / Heat option is off
#autoLOC_DF_00151 = AutoRecover Frozen Kerbals at KSC
#autoLOC_DF_00152 = If on, will AutoRecover Frozen Kerbals at the KSC\n and deduct the Cost from your funds
#autoLOC_DF_00153 = Cost to Thaw a Kerbal at KSC
#autoLOC_DF_00154 = Amt of currency Reqd to Freeze a Kerbal from the KSC
#autoLOC_DF_00155 = EC Reqd to Freeze/Thaw a Kerbal
#autoLOC_DF_00156 = Amt of ElecCharge Reqd to Freeze/Thaw a Kerbal.
#autoLOC_DF_00157 = Glykerol Reqd to Freeze a Kerbal
#autoLOC_DF_00158 = Amt of Glykerol used to Freeze a Kerbal,\nOverrides Part values.
#autoLOC_DF_00159 = DeepFreeze Temperatures
#autoLOC_DF_00160 = Get your calculator out.
#autoLOC_DF_00161 = Temps are in (K)elvin. (K) = (C)elcius + 273.15. (K) = ((F)arenheit + 459.67) × 5/9. Get your calculator out
#autoLOC_DF_00162 = Regulated Temperatures Required
#autoLOC_DF_00163 = If on, Regulated Temps apply to freeze\nand keep Kerbals Frozen.
#autoLOC_DF_00164 = Min. Temp. for Freezer to Freeze(K)
#autoLOC_DF_00165 = The minimum temperature (in Kelvin) for a Freezer\nto be able to Freeze a Kerbal.
#autoLOC_DF_00166 = Max. Temp. to keep Kerbals Frozen(K)
#autoLOC_DF_00167 = The maximum temperature (in Kelvin) for a Freezer\nto keep Kerbals frozen.
#autoLOC_DF_00168 = Heat generated per kerbal (kW/min)
#autoLOC_DF_00169 = Amount of thermal heat (kW) generated\nby equipment for each frozen kerbal per minute.
#autoLOC_DF_00170 = Heat generated freezer process(kW)
#autoLOC_DF_00171 = Amount of thermal heat (kW) generated\nwith each thaw/freeze process.
#autoLOC_DF_00172 = Show Part Temperatures in Kelvin
#autoLOC_DF_00173 = If on Part right click will show temp in Kelvin,\nif Off will show in Celcius.
#autoLOC_DF_00174 = DeepFreeze Misc.
#autoLOC_DF_00175 = Freezer Strip Lights On
#autoLOC_DF_00176 = Turn off if you do not want the internal\nfreezer strip lights to function.
#autoLOC_DF_00177 = ToolTips On
#autoLOC_DF_00178 = Turn the Tooltips on and off.
#autoLOC_DF_00179 = Editor Filter
#autoLOC_DF_00180 = Turn the DeepFreeze Editor filter Category on and off.
#autoLOC_DF_00181 = Use Stock App Launcher Icon
#autoLOC_DF_00182 = If on, the Stock Application launcher will be used,\nif off will use Blizzy Toolbar if installed.
#autoLOC_DF_00183 = Extra Debug Logging
#autoLOC_DF_00184 = Turn this On to capture lots of extra information\ninto the KSP log for reporting a problem.
#autoLOC_DF_00185 = CRY-0300 Cryonic Freezing Chamber
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Designed for long term storage of 1 kerbal. The CRY-0300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300 comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00188 = deepfreeze cryogenic freezer
#autoLOC_DF_00189 = CRY-0300R Cryonic Freezing Chamber
#autoLOC_DF_00190 = Designed for long term storage of 1 kerbal. The CRY-0300R uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300R comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300R also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00191 = CRY-1300 Cryonic Freezing Chamber
#autoLOC_DF_00192 = Designed for long term storage of up to 3 Kerbals. The CRY-1300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-1300 comes stocked with 15 units of Glykerol. CAUTION: The CRY-1300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00193 = CRY-2300 Cryonic Freezing Chamber
#autoLOC_DF_00194 = Designed for long term storage of up to 10 Kerbals. The CRY-2300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-2300 comes stocked with 50 units of Glykerol. CAUTION: The CRY-2300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00195 = RS-X20R Glykerol Container
#autoLOC_DF_00196 = The RS-X20R is a small-volume Radial Glykerol container, for all your Kerbal Freezing and Thawing needs. Brought to you by the good folks at REPOSoftTech. Warranty void if filled with Glykerol.
#autoLOC_DF_00197 = deepfreeze cryogenic freezer glykerol tank
#autoLOC_DF_00198 = Experts in the field of cryogenics, ergonomics and electrical equipment, the kerbals at REPOSoftTech are trying hard to keep all space fairing kerbals alive and their missions successful.
#autoLOC_DF_00199 = Freeze <<1>>
#autoLOC_DF_00200 = Thaw <<1>>
}
}
Localization
{
ja
{
#autoLOC_DF_00001 = <<1>> has recovered from emergency thaw and resumed normal duties.
#autoLOC_DF_00002 = <<1>> has been emergency thawed and cannot perform duties for <<2>> minutes.
#autoLOC_DF_00003 = DeepFreeze
#autoLOC_DF_00004 = DeepFreeze Vessel Switch
#autoLOC_DF_00005 = DeepFreeze Vessel Switch Failed
#autoLOC_DF_00006 = DeepFreeze Kerbals
#autoLOC_DF_00007 = DeepFreeze Alarms
#autoLOC_DF_00008 = Close Window
#autoLOC_DF_00009 = Vessel
#autoLOC_DF_00010 = Vessel Name
#autoLOC_DF_00011 = Part
#autoLOC_DF_00012 = Part Name
#autoLOC_DF_00013 = Tmp
#autoLOC_DF_00014 = Part Temperature Status
#autoLOC_DF_00015 = EC
#autoLOC_DF_00016 = Electric Charge Status
#autoLOC_DF_00017 = R.T
#autoLOC_DF_00018 = Remote Tech Status
#autoLOC_DF_00019 = Alarms
#autoLOC_DF_00020 = Press the button for Kerbal Alarm Clock Alarms assigned to this part
#autoLOC_DF_00021 = LastUpd
#autoLOC_DF_00022 = The Time the part was last updated
#autoLOC_DF_00023 = TimeRem
#autoLOC_DF_00024 = Approx. time remaining before Electric Charge will run out
#autoLOC_DF_00025 = Vessel <<1>> is Over-Heating.
#autoLOC_DF_00026 = OFF
#autoLOC_DF_00027 = S/BY
#autoLOC_DF_00028 = OUT
#autoLOC_DF_00029 = Vesssel <<1>> is out of ElectricCharge.\n Situation Critical.
#autoLOC_DF_00030 = ALRT
#autoLOC_DF_00031 = Vessel <<1>> is almost out of ElectricCharge.
#autoLOC_DF_00032 = LOW
#autoLOC_DF_00033 = OK
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Alarm
#autoLOC_DF_00036 = Go to Alarms
#autoLOC_DF_00037 = There are currently no Frozen Kerbals
#autoLOC_DF_00038 = Kerbal Name
#autoLOC_DF_00039 = Profession
#autoLOC_DF_00040 = Thaw
#autoLOC_DF_00041 = Thaw this kerbal
#autoLOC_DF_00042 = Cannot thaw <<1>> from KSC. Vessel still exists <<2>> at <<3>>
#autoLOC_DF_00043 = Freeze
#autoLOC_DF_00044 = Freeze this kerbal
#autoLOC_DF_00045 = KAC Alarms
#autoLOC_DF_00046 = Resize Window
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> was stored frozen at KSC
#autoLOC_DF_00050 = Insufficient funds to thaw <<1>> at this time
#autoLOC_DF_00051 = <<1>> was found and thawed out
#autoLOC_DF_00052 = <<1>> was found and thawed out <<2>> funds deducted from account
#autoLOC_DF_00053 = Cannot thaw <<1>> vessel still exists <<2>> at <<3>>
#autoLOC_DF_00054 = Freezer Capacity
#autoLOC_DF_00055 = Total Frozen Kerbals
#autoLOC_DF_00056 = Freezer Space
#autoLOC_DF_00057 = Part is Full?
#autoLOC_DF_00058 = R/T Connection
#autoLOC_DF_00059 = Freezer Temp
#autoLOC_DF_00060 = Cabin Temperature
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = DeepFreeze Menu
#autoLOC_DF_00063 = EC p/Kerbal to run
#autoLOC_DF_00064 = \u0020p/min
#autoLOC_DF_00065 = Current EC Usage
#autoLOC_DF_00066 = \u0020p/sec
#autoLOC_DF_00067 = Glykerol Reqd. to Freeze
#autoLOC_DF_00068 = EC p/Kerbal to Frze/Thaw
#autoLOC_DF_00069 = \nCryopods: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Pod:<<1>>
#autoLOC_DF_00072 = Insufficient electric charge to monitor frozen kerbals.
#autoLOC_DF_00073 = \u0020Freezer Out of EC : Systems critical in <<1>> secs
#autoLOC_DF_00074 = <<1>> died due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00075 = Check Temperatures, Freezer getting hot
#autoLOC_DF_00076 = Warning!! Check Temperatures NOW, Freezer getting very hot
#autoLOC_DF_00077 = Temperature getting too hot for kerbals to remain frozen.
#autoLOC_DF_00078 = Freezer Over Temp : Systems critical in <<1>> secs
#autoLOC_DF_00079 = <<1>> died due to overheating, cannot keep frozen
#autoLOC_DF_00080 = Over Temperature - Emergency Thaw in Progress.
#autoLOC_DF_00081 = Insufficient electric charge to freeze kerbal
#autoLOC_DF_00082 = \u0020Cryopod - Charging: <<1>>
#autoLOC_DF_00083 = Insufficient Glykerol to freeze kerbal
#autoLOC_DF_00084 = Cannot Freeze while Temperature greater than <<1>>
#autoLOC_DF_00085 = Cannot Freeze while Crew Xfer in progress
#autoLOC_DF_00086 = Cannot run Freeze process on more than one Kerbal at a time
#autoLOC_DF_00087 = RemoteTech Detected. Press Freeze Again if you want to Freeze your Last Active Kerbal
#autoLOC_DF_00088 = An Active connection or Active Kerbal is Required On-Board to Initiate Thaw Process
#autoLOC_DF_00089 = Cannot freeze kerbal. Freezer is full
#autoLOC_DF_00090 = Cannot freeze kerbal at this time
#autoLOC_DF_00091 = Starting Freeze process
#autoLOC_DF_00092 = Freezing Aborted
#autoLOC_DF_00093 = <<1>> frozen
#autoLOC_DF_00094 = Insufficient electric charge to thaw kerbal
#autoLOC_DF_00095 = \u0020Cryopod - Charging:<<1>>
#autoLOC_DF_00096 = Cannot Thaw <<1>> Part is full
#autoLOC_DF_00097 = Cannot Thaw while Crew Xfer in progress
#autoLOC_DF_00098 = Cannot run Thaw process on more than one Kerbal at a time
#autoLOC_DF_00099 = Cannot thaw kerbal at this time
#autoLOC_DF_00100 = Code Error: Cannot thaw kerbal at this time, Check Log
#autoLOC_DF_00101 = Thawing Aborted
#autoLOC_DF_00102 = <<1>> thawed out
#autoLOC_DF_00103 = <<1>> was thawed out due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00104 = DeepFreezer mechanical failure
#autoLOC_DF_00105 = Vessel about to change, Aborting Thaw process
#autoLOC_DF_00106 = Vessel about to change, Aborting Freeze process
#autoLOC_DF_00107 = DeepFreeze Items
#autoLOC_DF_00108 = There is less than 5 units of Glykerol on-board for your DeepFreeze Freezers
#autoLOC_DF_00109 = A DeepFreeze Alarm event has occurred. Please Switch to <<1>> to execute.
#autoLOC_DF_00110 = DeepFreeze Alarm processing completed.
#autoLOC_DF_00111 = Name
#autoLOC_DF_00112 = Alarm Name
#autoLOC_DF_00113 = Alarm Type
#autoLOC_DF_00114 = KAC Alarm Type
#autoLOC_DF_00115 = Time Remain.
#autoLOC_DF_00116 = Time remaining before Alarm is triggered
#autoLOC_DF_00117 = There are currently no KAC alarms associated to a DeepFreeze vessel
#autoLOC_DF_00118 = Delete
#autoLOC_DF_00119 = Delete this KAC alarm completely
#autoLOC_DF_00120 = Modify
#autoLOC_DF_00121 = Modify this Alarm
#autoLOC_DF_00122 = Save
#autoLOC_DF_00123 = Save Alarm Changes
#autoLOC_DF_00124 = Cannot Save Alarm. No R/Tech Connection to vessel.
#autoLOC_DF_00125 = DeepFreeze Alarm changes Saved.
#autoLOC_DF_00126 = DeepFreeze Cannot Save alarm changes, Time is up.
#autoLOC_DF_00127 = Cancel
#autoLOC_DF_00128 = Cancel any changes
#autoLOC_DF_00129 = Name
#autoLOC_DF_00130 = The Kerbals Name
#autoLOC_DF_00131 = Trait
#autoLOC_DF_00132 = The Kerbals Profession
#autoLOC_DF_00133 = Thaw
#autoLOC_DF_00134 = Thaw this kerbal on alarm activation
#autoLOC_DF_00135 = Freeze
#autoLOC_DF_00136 = Freeze this kerbal on alarm activation
#autoLOC_DF_00137 = Modify
#autoLOC_DF_00138 = Modify this Alarms settings
#autoLOC_DF_00139 = Switch to Vessel
#autoLOC_DF_00140 = Not Now
#autoLOC_DF_00141 = Don't switch vessel now
#autoLOC_DF_00142 = Automatic Switch to vessel failed.\nPlease switch manually to vessel Immediately
#autoLOC_DF_00143 = Switch to DeepFreeze vessel required
#autoLOC_DF_00144 = DeepFreeze Options
#autoLOC_DF_00145 = ElectricCharge Required to run Freezers
#autoLOC_DF_00146 = If on, EC is required to run freezers
#autoLOC_DF_00147 = Fatal EC/Heat Option
#autoLOC_DF_00148 = If on Kerbals will die if EC runs out or it gets too hot
#autoLOC_DF_00149 = Non Fatal Comatose Time(in secs)
#autoLOC_DF_00150 = The time in seconds a kerbal is comatose\n if fatal EC / Heat option is off
#autoLOC_DF_00151 = AutoRecover Frozen Kerbals at KSC
#autoLOC_DF_00152 = If on, will AutoRecover Frozen Kerbals at the KSC\n and deduct the Cost from your funds
#autoLOC_DF_00153 = Cost to Thaw a Kerbal at KSC
#autoLOC_DF_00154 = Amt of currency Reqd to Freeze a Kerbal from the KSC
#autoLOC_DF_00155 = EC Reqd to Freeze/Thaw a Kerbal
#autoLOC_DF_00156 = Amt of ElecCharge Reqd to Freeze/Thaw a Kerbal.
#autoLOC_DF_00157 = Glykerol Reqd to Freeze a Kerbal
#autoLOC_DF_00158 = Amt of Glykerol used to Freeze a Kerbal,\nOverrides Part values.
#autoLOC_DF_00159 = DeepFreeze Temperatures
#autoLOC_DF_00160 = Get your calculator out.
#autoLOC_DF_00161 = Temps are in (K)elvin. (K) = (C)elcius + 273.15. (K) = ((F)arenheit + 459.67) × 5/9. Get your calculator out
#autoLOC_DF_00162 = Regulated Temperatures Required
#autoLOC_DF_00163 = If on, Regulated Temps apply to freeze\nand keep Kerbals Frozen.
#autoLOC_DF_00164 = Min. Temp. for Freezer to Freeze(K)
#autoLOC_DF_00165 = The minimum temperature (in Kelvin) for a Freezer\nto be able to Freeze a Kerbal.
#autoLOC_DF_00166 = Max. Temp. to keep Kerbals Frozen(K)
#autoLOC_DF_00167 = The maximum temperature (in Kelvin) for a Freezer\nto keep Kerbals frozen.
#autoLOC_DF_00168 = Heat generated per kerbal (kW/min)
#autoLOC_DF_00169 = Amount of thermal heat (kW) generated\nby equipment for each frozen kerbal per minute.
#autoLOC_DF_00170 = Heat generated freezer process(kW)
#autoLOC_DF_00171 = Amount of thermal heat (kW) generated\nwith each thaw/freeze process.
#autoLOC_DF_00172 = Show Part Temperatures in Kelvin
#autoLOC_DF_00173 = If on Part right click will show temp in Kelvin,\nif Off will show in Celcius.
#autoLOC_DF_00174 = DeepFreeze Misc.
#autoLOC_DF_00175 = Freezer Strip Lights On
#autoLOC_DF_00176 = Turn off if you do not want the internal\nfreezer strip lights to function.
#autoLOC_DF_00177 = ToolTips On
#autoLOC_DF_00178 = Turn the Tooltips on and off.
#autoLOC_DF_00179 = Editor Filter
#autoLOC_DF_00180 = Turn the DeepFreeze Editor filter Category on and off.
#autoLOC_DF_00181 = Use Stock App Launcher Icon
#autoLOC_DF_00182 = If on, the Stock Application launcher will be used,\nif off will use Blizzy Toolbar if installed.
#autoLOC_DF_00183 = Extra Debug Logging
#autoLOC_DF_00184 = Turn this On to capture lots of extra information\ninto the KSP log for reporting a problem.
#autoLOC_DF_00185 = CRY-0300 Cryonic Freezing Chamber
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Designed for long term storage of 1 kerbal. The CRY-0300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300 comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00188 = deepfreeze cryogenic freezer
#autoLOC_DF_00189 = CRY-0300R Cryonic Freezing Chamber
#autoLOC_DF_00190 = Designed for long term storage of 1 kerbal. The CRY-0300R uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300R comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300R also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00191 = CRY-1300 Cryonic Freezing Chamber
#autoLOC_DF_00192 = Designed for long term storage of up to 3 Kerbals. The CRY-1300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-1300 comes stocked with 15 units of Glykerol. CAUTION: The CRY-1300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00193 = CRY-2300 Cryonic Freezing Chamber
#autoLOC_DF_00194 = Designed for long term storage of up to 10 Kerbals. The CRY-2300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-2300 comes stocked with 50 units of Glykerol. CAUTION: The CRY-2300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00195 = RS-X20R Glykerol Container
#autoLOC_DF_00196 = The RS-X20R is a small-volume Radial Glykerol container, for all your Kerbal Freezing and Thawing needs. Brought to you by the good folks at REPOSoftTech. Warranty void if filled with Glykerol.
#autoLOC_DF_00197 = deepfreeze cryogenic freezer glykerol tank
#autoLOC_DF_00198 = Experts in the field of cryogenics, ergonomics and electrical equipment, the kerbals at REPOSoftTech are trying hard to keep all space fairing kerbals alive and their missions successful.
#autoLOC_DF_00199 = Freeze <<1>>
#autoLOC_DF_00200 = Thaw <<1>>
}
}
Localization
{
ru
{
#autoLOC_DF_00001 = <<1>> оправился от чрезвычайных разморозок и возобновил выполнение своих обычных обязанностей.
#autoLOC_DF_00002 = <<1>> была аварийная разморозка, не сможет выполнять свои обязанности <<2>> минут.
#autoLOC_DF_00003 = DeepFreeze
#autoLOC_DF_00004 = Смотреть аппарат DeepFreeze
#autoLOC_DF_00005 = Ошибка переключения на аппарат DeepFreeze
#autoLOC_DF_00006 = DeepFreeze Kербалы
#autoLOC_DF_00007 = Часы DeepFreeze
#autoLOC_DF_00008 = Закрыть окно
#autoLOC_DF_00009 = Аппарат
#autoLOC_DF_00010 = Название аппарата
#autoLOC_DF_00011 = Аппарат
#autoLOC_DF_00012 = Название части
#autoLOC_DF_00013 = Темп.
#autoLOC_DF_00014 = Статус температуры
#autoLOC_DF_00015 = Электр.
#autoLOC_DF_00016 = Статус электричества
#autoLOC_DF_00017 = Р.Т
#autoLOC_DF_00018 = Р.Т. статус
#autoLOC_DF_00019 = Часы
#autoLOC_DF_00020 = Нажмите кнопку сигнала тревоги для будильника, назначенные к этой части
#autoLOC_DF_00021 = Последнее обновл.
#autoLOC_DF_00022 = Время было обновлено
#autoLOC_DF_00023 = Время
#autoLOC_DF_00024 = Окей. Время, оставшиеся до электричества, может истечь
#autoLOC_DF_00025 = Аппарат <<1>> перегрелся.
#autoLOC_DF_00026 = ВЫКЛ.
#autoLOC_DF_00027 = S/BY
#autoLOC_DF_00028 = КОНЧИЛОСЬ
#autoLOC_DF_00029 = Аппарат <<1>> не имеет электричества.\n Критическая ситуация.
#autoLOC_DF_00030 = ЧАСЫ
#autoLOC_DF_00031 = Аппарат <<1>> полон электричества.
#autoLOC_DF_00032 = НИЗКО
#autoLOC_DF_00033 = ОК
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Часы
#autoLOC_DF_00036 = К часам
#autoLOC_DF_00037 = В настоящее время нет замороженных Кербалов
#autoLOC_DF_00038 = Имя Кербала
#autoLOC_DF_00039 = Профессия
#autoLOC_DF_00040 = Размор.
#autoLOC_DF_00041 = Размор. этого Кербала
#autoLOC_DF_00042 = Нельзя разморозить <<1>> около КСЦ. Аппарат по-прежнему существует <<2>> в <<3>>
#autoLOC_DF_00043 = Замор.
#autoLOC_DF_00044 = Замор. этого Кербала
#autoLOC_DF_00045 = KAC часы
#autoLOC_DF_00046 = Изменить окно
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> был заморожен(а) около КСЦ
#autoLOC_DF_00050 = Недостаточно средств, чтобы разморозить <<1>> в это время
#autoLOC_DF_00051 = <<1>> Обнаружен и разморожен
#autoLOC_DF_00052 = <<1>> обнаружен и разморожен <<2>> средства списываются со счёта
#autoLOC_DF_00053 = Нельзя разморозить <<1>>, аппарат по-прежнему существует <<2>> в <<3>>
#autoLOC_DF_00054 = Вместимость для заморозки
#autoLOC_DF_00055 = Всех замороженных Кербалов
#autoLOC_DF_00056 = Всего можно заморозить
#autoLOC_DF_00057 = Кабина полная?
#autoLOC_DF_00058 = Р.Т. соединение
#autoLOC_DF_00059 = Температура для заморозки
#autoLOC_DF_00060 = Температура кабины
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = Меню DeepFreeze
#autoLOC_DF_00063 = Нужное кол-во ед. электр. для запуска
#autoLOC_DF_00064 = \u0020p/мин
#autoLOC_DF_00065 = Кол-во используемого электр.
#autoLOC_DF_00066 = \u0020p/сек
#autoLOC_DF_00067 = Нужное кол-во гликерола для заморозки
#autoLOC_DF_00068 = Электр. для заморозки/разморозки Кербала
#autoLOC_DF_00069 = \nКабина: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Кабина:<<1>>
#autoLOC_DF_00072 = Недостаточно электричества для мониторинга замороженных кербалов.
#autoLOC_DF_00073 = \u0020Кабина не имеет электричества: критическая ситуация на <<1>> секунд(ы)
#autoLOC_DF_00074 = <<1>> умер из-за отсутствия электричества для запуска криогенника
#autoLOC_DF_00075 = Проверьте температуру, в криогеннике становится жарко
#autoLOC_DF_00076 = ВНИМАНИЕ! Проверьте температуру СЕЙЧАС, в криогеннике очень жарко!
#autoLOC_DF_00077 = Температура становится слишком высокой для кербалов, чтобы оставаться замороженным.
#autoLOC_DF_00078 = Криогенник перегрет: критическая ситуация на <<1>> секунд(ы)
#autoLOC_DF_00079 = <<1>> умер из-за перегрева, невозможно держать в заморозке
#autoLOC_DF_00080 = Перегрев - аварийная разморозка в процессе.
#autoLOC_DF_00081 = Недостаточно электричества для заморозки Кербала
#autoLOC_DF_00082 = \u0020Расход электричества: <<1>>
#autoLOC_DF_00083 = Недостаточно гликерола для заморозки Кербала
#autoLOC_DF_00084 = Нельзя заморозить, пока темп. не станет ниже чем <<1>>
#autoLOC_DF_00085 = Нельзя заморозить, пока переместитель экипажа работает
#autoLOC_DF_00086 = Невозможно запустить процесс замораживания более одного Кербала в это время
#autoLOC_DF_00087 = Р.Т. обнаружен. Нажмите "Заморозить", если вы хотите заморозить своего последнего активного Кербала.
#autoLOC_DF_00088 = Активное соединение или активный Кербал на борту, чтобы начать процесс разморозки
#autoLOC_DF_00089 = Нельзя заморозить Кербала. Кабина полная
#autoLOC_DF_00090 = Нельзя разморозить Кербала в это время
#autoLOC_DF_00091 = Идет процесс заморозки
#autoLOC_DF_00092 = Заморозка отменена
#autoLOC_DF_00093 = <<1>> заморожен(а)
#autoLOC_DF_00094 = Недостаточно электричества для разморозки Кербала
#autoLOC_DF_00095 = \u0020Расход электричества:<<1>>
#autoLOC_DF_00096 = Нельзя разморозить <<1>>, кабина полная
#autoLOC_DF_00097 = Нельзя разморозить пока переместитель экипажа в процессе
#autoLOC_DF_00098 = Нельзя размораживать более одного Кербала в одно и то же время
#autoLOC_DF_00099 = Нельзя разморозить Кербала в это время
#autoLOC_DF_00100 = Ошибка кода: нельзя разморозить Кербала. Проверьте логи
#autoLOC_DF_00101 = Разморозка отменена
#autoLOC_DF_00102 = <<1>> разморожен(а)
#autoLOC_DF_00103 = <<1>> был разморожен из-за отсутствия электричества для запуска криогеника
#autoLOC_DF_00104 = Криогенник имеет механическое повреждение
#autoLOC_DF_00105 = Аппарат изменился, прерывание процесса разморозки
#autoLOC_DF_00106 = Аппарат изменился, прерывание процесса заморозки
#autoLOC_DF_00107 = DeepFreeze темы
#autoLOC_DF_00108 = Осталось менее 5 единиц гликерола для глубокой заморозки
#autoLOC_DF_00109 = Произошла тревога события заморозки. Пожалуйста, переключитесь на <<1>>, чтобы выполнить.
#autoLOC_DF_00110 = Обработка будильника завершена.
#autoLOC_DF_00111 = Имя
#autoLOC_DF_00112 = Название часов
#autoLOC_DF_00113 = Тип часов
#autoLOC_DF_00114 = KAC тип часов
#autoLOC_DF_00115 = Оставшееся время
#autoLOC_DF_00116 = Оставшееся время до тревоги
#autoLOC_DF_00117 = В настоящее время нет KAC часов, связанных с криогенником
#autoLOC_DF_00118 = Удалить
#autoLOC_DF_00119 = Удалите эти KAC часы полностью
#autoLOC_DF_00120 = Изменить
#autoLOC_DF_00121 = Изменить эти часы
#autoLOC_DF_00122 = Сохранить
#autoLOC_DF_00123 = Сохранить изменения часов
#autoLOC_DF_00124 = Невозможно сохранить часы. Отсутствует сигнал Р.Т.
#autoLOC_DF_00125 = Сохранить изменения часов DeepFreeze.
#autoLOC_DF_00126 = DeepFreeze не может сохранить изменения часов, время истекло.
#autoLOC_DF_00127 = Отменить
#autoLOC_DF_00128 = Отменить изменения
#autoLOC_DF_00129 = Имя
#autoLOC_DF_00130 = Имя Кербала
#autoLOC_DF_00131 = Черта
#autoLOC_DF_00132 = Профессия Кербала
#autoLOC_DF_00133 = Разморозить
#autoLOC_DF_00134 = Разморозить этого Кербала по активации часов
#autoLOC_DF_00135 = Заморозить
#autoLOC_DF_00136 = Разморозить этого Кербала по активации часов
#autoLOC_DF_00137 = Изменить
#autoLOC_DF_00138 = Изменить настройки этих часов
#autoLOC_DF_00139 = Переключиться на аппарат
#autoLOC_DF_00140 = Не сейчас
#autoLOC_DF_00141 = Невозможно переключиться на аппарат
#autoLOC_DF_00142 = Автоматическое переключение на аппарат не удалось.\nПожалуйста переключитесь вручную.
#autoLOC_DF_00143 = Требуется переключение на криогенник
#autoLOC_DF_00144 = Опции DeepFreeze
#autoLOC_DF_00145 = Нужное кол-во электричества для запуска криогенника
#autoLOC_DF_00146 = Если включено, электричество нужно для запуска криогенника
#autoLOC_DF_00147 = Макс. электр./тепло
#autoLOC_DF_00148 = Кербал умрет, если электричество заканчивается или становится слишком жарко.
#autoLOC_DF_00149 = Некритическое коматозное время (в сек)
#autoLOC_DF_00150 = Время комы Кербала в секундах\n если отсутствует электричество/тепло отключено
#autoLOC_DF_00151 = Автовозвращение замороженных Кербалов в КСЦ
#autoLOC_DF_00152 = Если включено, будет авто-возвращение замороженных Кербалов в КСЦ\n и будет списание средств со счета.
#autoLOC_DF_00153 = Стоимость разморозки Кербала в КСЦ
#autoLOC_DF_00154 = Нужное кол-во валюты для заморозки Кербала в КСЦ
#autoLOC_DF_00155 = Нужное кол-во ед. электр. для заморозки/разморозки Кербала
#autoLOC_DF_00156 = Нужное кол-во электричества для заморозки/разморозки Кербала в КСЦ
#autoLOC_DF_00157 = Нужное кол-во гликерола для заморозки/разморозки Кербала
#autoLOC_DF_00158 = Нужное кол-во гликерола для заморозки,\nПерекрывает часть цены.
#autoLOC_DF_00159 = DeepFreeze температуры
#autoLOC_DF_00160 = Получите свой калькулятор.
#autoLOC_DF_00161 = Темп. по (K)ельвину. (K) = (Ц)ельсия + 273.15. (K) = ((Ф)аренгейт + 459.67) × 5/9. Получите свой калькулятор.
#autoLOC_DF_00162 = Необходимая постоянная температура
#autoLOC_DF_00163 = Если включено, электричество применяется для заморозки/держания Кербалов в заморозке.
#autoLOC_DF_00164 = Минимальная температура для заморозки (K)
#autoLOC_DF_00165 = Минимальная температура (по Кельвину) для заморозки Кербала.
#autoLOC_DF_00166 = Максимальная температура для поддержания заморозки (K)
#autoLOC_DF_00167 = Максимальная температура (по Кельвину) для заморозки Кербала/поддержания заморозки.
#autoLOC_DF_00168 = Тепло, выделяемое для Кербала (кВт/мин)
#autoLOC_DF_00169 = Объем тепловой энергии (кВт), создаваемый оборудованием\n для каждого замороженного Кербала в минуту.
#autoLOC_DF_00170 = Тепло, выделяемое криогеннику(кВт)
#autoLOC_DF_00171 = Объем тепловой энергии (кВт)\n на каждый процесс размораживания/замораживания.
#autoLOC_DF_00172 = Показать температуру частей по Кельвину
#autoLOC_DF_00173 = Если при нажатии ПКМ показывает темп. по Кельвину,\n если выключите, будет показывать в Цельсия.
#autoLOC_DF_00174 = Накл. DeepFreeze
#autoLOC_DF_00175 = Включить свет
#autoLOC_DF_00176 = Выключите, если Вы не хотите, чтобы свет интерьера\n функционировал.
#autoLOC_DF_00177 = Вкл. подсказки
#autoLOC_DF_00178 = Включите подсказки и выключите.
#autoLOC_DF_00179 = Редактор фильтра
#autoLOC_DF_00180 = Включите редактор DeepFreeze-категории фильтров.
#autoLOC_DF_00181 = Использовать значок стокового лаунчера.
#autoLOC_DF_00182 = Если включено, стоковый лаунчер будет использоваться,\n если выключены, будет использоваться Blizzy Toolbar, если установлен.
#autoLOC_DF_00183 = Дополнительные дебаги
#autoLOC_DF_00184 = Включите это, чтобы взять множество дополнительной информации\n в КСП отчет для представления проблемы.
#autoLOC_DF_00185 = Крик0300
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Предназначен для длительного хранения 1 кербала. Крик-0300 использует гликерол и электричество чтобы заморозить или разморозить одного Кербала. Пожалуйста, убедитесь, достаточно ли у вас электричества на свой корабль. К Крик-0300 предоставляется 10 единиц гликерола. Осторожно: Крик-0300 также требует электричества в минуту для Кербала, чтобы держать его мониторинг функционирования систем. Если он не может сделать этого без электричества, существует риск, что замороженный Кербал умрет.
#autoLOC_DF_00188 = deepfreeze cryogenic freezer
#autoLOC_DF_00189 = Крик0300Р
#autoLOC_DF_00190 = Предназначен для длительного хранения 1 кербала. Крик0300Р использует гликерол и электричество чтобы заморозить или разморозить одного Кербала. Пожалуйста, убедитесь, достаточно ли у вас электричества на свой корабль. К Крик300 предоставляется 10 единиц гликерола. Осторожно: Крик0300Р также требует электричества в минуту для Кербала, чтобы держать его мониторинг функционирования систем. Если он не может сделать этого без электричества, существует риск, что замороженный Кербал умрет.
#autoLOC_DF_00191 = Крик1300
#autoLOC_DF_00192 = Предназначен для длительного хранения 3 кербалов. Крик1300 использует гликерол и электричество чтобы заморозить или разморозить одного Кербала. Пожалуйста, убедитесь, достаточно ли у вас электричества на свой корабль. К Крик1300 предоставляется 15 единиц гликерола. Осторожно: Крик1300 также требует электричества в минуту для Кербала, чтобы держать его мониторинг функционирования систем. Если он не может сделать этого без электричества, существует риск, что замороженный Кербал умрет.
#autoLOC_DF_00193 = Крик2300
#autoLOC_DF_00194 = Предназначен для длительного хранения 10 кербалов. Крик2300 использует гликерол и электричество чтобы заморозить или разморозить одного Кербала. Пожалуйста, убедитесь, достаточно ли у вас электричества на свой корабль. К Крик2300 предоставляется 50 единиц гликерола. Осторожно: Крик2300 также требует электричества в минуту для Кербала, чтобы держать его мониторинг функционирования систем. Если он не может сделать этого без электричества, существует риск, что замороженный Кербал умрет.
#autoLOC_DF_00195 = Радиальный бак с гликероломr
#autoLOC_DF_00196 = РС-X20R-это небольшие по объему радиальные контейнеры для замораживания Кербала или его разморозки.
#autoLOC_DF_00197 = deepfreeze cryogenic freezer glykerol tank
#autoLOC_DF_00198 = Эксперты в области криогеники, эргономики и электрооборудования, а также кербалы в REPOSoftTech очень стараются держать все пространство кербалов живым и их миссии успешными.
#autoLOC_DF_00199 = Заморозить <<1>>
#autoLOC_DF_00200 = Разморозить <<1>>
}
}
Localization
{
zh-cn
{
#autoLOC_DF_00001 = <<1>> has recovered from emergency thaw and resumed normal duties.
#autoLOC_DF_00002 = <<1>> has been emergency thawed and cannot perform duties for <<2>> minutes.
#autoLOC_DF_00003 = DeepFreeze
#autoLOC_DF_00004 = DeepFreeze Vessel Switch
#autoLOC_DF_00005 = DeepFreeze Vessel Switch Failed
#autoLOC_DF_00006 = DeepFreeze Kerbals
#autoLOC_DF_00007 = DeepFreeze Alarms
#autoLOC_DF_00008 = Close Window
#autoLOC_DF_00009 = Vessel
#autoLOC_DF_00010 = Vessel Name
#autoLOC_DF_00011 = Part
#autoLOC_DF_00012 = Part Name
#autoLOC_DF_00013 = Tmp
#autoLOC_DF_00014 = Part Temperature Status
#autoLOC_DF_00015 = EC
#autoLOC_DF_00016 = Electric Charge Status
#autoLOC_DF_00017 = R.T
#autoLOC_DF_00018 = Remote Tech Status
#autoLOC_DF_00019 = Alarms
#autoLOC_DF_00020 = Press the button for Kerbal Alarm Clock Alarms assigned to this part
#autoLOC_DF_00021 = LastUpd
#autoLOC_DF_00022 = The Time the part was last updated
#autoLOC_DF_00023 = TimeRem
#autoLOC_DF_00024 = Approx. time remaining before Electric Charge will run out
#autoLOC_DF_00025 = Vessel <<1>> is Over-Heating.
#autoLOC_DF_00026 = OFF
#autoLOC_DF_00027 = S/BY
#autoLOC_DF_00028 = OUT
#autoLOC_DF_00029 = Vesssel <<1>> is out of ElectricCharge.\n Situation Critical.
#autoLOC_DF_00030 = ALRT
#autoLOC_DF_00031 = Vessel <<1>> is almost out of ElectricCharge.
#autoLOC_DF_00032 = LOW
#autoLOC_DF_00033 = OK
#autoLOC_DF_00034 = NC
#autoLOC_DF_00035 = Alarm
#autoLOC_DF_00036 = Go to Alarms
#autoLOC_DF_00037 = There are currently no Frozen Kerbals
#autoLOC_DF_00038 = Kerbal Name
#autoLOC_DF_00039 = Profession
#autoLOC_DF_00040 = Thaw
#autoLOC_DF_00041 = Thaw this kerbal
#autoLOC_DF_00042 = Cannot thaw <<1>> from KSC. Vessel still exists <<2>> at <<3>>
#autoLOC_DF_00043 = Freeze
#autoLOC_DF_00044 = Freeze this kerbal
#autoLOC_DF_00045 = KAC Alarms
#autoLOC_DF_00046 = Resize Window
#autoLOC_DF_00047 = <<1>>K
#autoLOC_DF_00048 = <<2>>C
#autoLOC_DF_00049 = <<1>> was stored frozen at KSC
#autoLOC_DF_00050 = Insufficient funds to thaw <<1>> at this time
#autoLOC_DF_00051 = <<1>> was found and thawed out
#autoLOC_DF_00052 = <<1>> was found and thawed out <<2>> funds deducted from account
#autoLOC_DF_00053 = Cannot thaw <<1>> vessel still exists <<2>> at <<3>>
#autoLOC_DF_00054 = Freezer Capacity
#autoLOC_DF_00055 = Total Frozen Kerbals
#autoLOC_DF_00056 = Freezer Space
#autoLOC_DF_00057 = Part is Full?
#autoLOC_DF_00058 = R/T Connection
#autoLOC_DF_00059 = Freezer Temp
#autoLOC_DF_00060 = Cabin Temperature
#autoLOC_DF_00061 = K
#autoLOC_DF_00062 = DeepFreeze Menu
#autoLOC_DF_00063 = EC p/Kerbal to run
#autoLOC_DF_00064 = \u0020p/min
#autoLOC_DF_00065 = Current EC Usage
#autoLOC_DF_00066 = \u0020p/sec
#autoLOC_DF_00067 = Glykerol Reqd. to Freeze
#autoLOC_DF_00068 = EC p/Kerbal to Frze/Thaw
#autoLOC_DF_00069 = \nCryopods: <<1>>
#autoLOC_DF_00070 = C
#autoLOC_DF_00071 = Pod:<<1>>
#autoLOC_DF_00072 = Insufficient electric charge to monitor frozen kerbals.
#autoLOC_DF_00073 = \u0020Freezer Out of EC : Systems critical in <<1>> secs
#autoLOC_DF_00074 = <<1>> died due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00075 = Check Temperatures, Freezer getting hot
#autoLOC_DF_00076 = Warning!! Check Temperatures NOW, Freezer getting very hot
#autoLOC_DF_00077 = Temperature getting too hot for kerbals to remain frozen.
#autoLOC_DF_00078 = Freezer Over Temp : Systems critical in <<1>> secs
#autoLOC_DF_00079 = <<1>> died due to overheating, cannot keep frozen
#autoLOC_DF_00080 = Over Temperature - Emergency Thaw in Progress.
#autoLOC_DF_00081 = Insufficient electric charge to freeze kerbal
#autoLOC_DF_00082 = \u0020Cryopod - Charging: <<1>>
#autoLOC_DF_00083 = Insufficient Glykerol to freeze kerbal
#autoLOC_DF_00084 = Cannot Freeze while Temperature greater than <<1>>
#autoLOC_DF_00085 = Cannot Freeze while Crew Xfer in progress
#autoLOC_DF_00086 = Cannot run Freeze process on more than one Kerbal at a time
#autoLOC_DF_00087 = RemoteTech Detected. Press Freeze Again if you want to Freeze your Last Active Kerbal
#autoLOC_DF_00088 = An Active connection or Active Kerbal is Required On-Board to Initiate Thaw Process
#autoLOC_DF_00089 = Cannot freeze kerbal. Freezer is full
#autoLOC_DF_00090 = Cannot freeze kerbal at this time
#autoLOC_DF_00091 = Starting Freeze process
#autoLOC_DF_00092 = Freezing Aborted
#autoLOC_DF_00093 = <<1>> frozen
#autoLOC_DF_00094 = Insufficient electric charge to thaw kerbal
#autoLOC_DF_00095 = \u0020Cryopod - Charging:<<1>>
#autoLOC_DF_00096 = Cannot Thaw <<1>> Part is full
#autoLOC_DF_00097 = Cannot Thaw while Crew Xfer in progress
#autoLOC_DF_00098 = Cannot run Thaw process on more than one Kerbal at a time
#autoLOC_DF_00099 = Cannot thaw kerbal at this time
#autoLOC_DF_00100 = Code Error: Cannot thaw kerbal at this time, Check Log
#autoLOC_DF_00101 = Thawing Aborted
#autoLOC_DF_00102 = <<1>> thawed out
#autoLOC_DF_00103 = <<1>> was thawed out due to lack of Electrical Charge to run cryogenics
#autoLOC_DF_00104 = DeepFreezer mechanical failure
#autoLOC_DF_00105 = Vessel about to change, Aborting Thaw process
#autoLOC_DF_00106 = Vessel about to change, Aborting Freeze process
#autoLOC_DF_00107 = DeepFreeze Items
#autoLOC_DF_00108 = There is less than 5 units of Glykerol on-board for your DeepFreeze Freezers
#autoLOC_DF_00109 = A DeepFreeze Alarm event has occurred. Please Switch to <<1>> to execute.
#autoLOC_DF_00110 = DeepFreeze Alarm processing completed.
#autoLOC_DF_00111 = Name
#autoLOC_DF_00112 = Alarm Name
#autoLOC_DF_00113 = Alarm Type
#autoLOC_DF_00114 = KAC Alarm Type
#autoLOC_DF_00115 = Time Remain.
#autoLOC_DF_00116 = Time remaining before Alarm is triggered
#autoLOC_DF_00117 = There are currently no KAC alarms associated to a DeepFreeze vessel
#autoLOC_DF_00118 = Delete
#autoLOC_DF_00119 = Delete this KAC alarm completely
#autoLOC_DF_00120 = Modify
#autoLOC_DF_00121 = Modify this Alarm
#autoLOC_DF_00122 = Save
#autoLOC_DF_00123 = Save Alarm Changes
#autoLOC_DF_00124 = Cannot Save Alarm. No R/Tech Connection to vessel.
#autoLOC_DF_00125 = DeepFreeze Alarm changes Saved.
#autoLOC_DF_00126 = DeepFreeze Cannot Save alarm changes, Time is up.
#autoLOC_DF_00127 = Cancel
#autoLOC_DF_00128 = Cancel any changes
#autoLOC_DF_00129 = Name
#autoLOC_DF_00130 = The Kerbals Name
#autoLOC_DF_00131 = Trait
#autoLOC_DF_00132 = The Kerbals Profession
#autoLOC_DF_00133 = Thaw
#autoLOC_DF_00134 = Thaw this kerbal on alarm activation
#autoLOC_DF_00135 = Freeze
#autoLOC_DF_00136 = Freeze this kerbal on alarm activation
#autoLOC_DF_00137 = Modify
#autoLOC_DF_00138 = Modify this Alarms settings
#autoLOC_DF_00139 = Switch to Vessel
#autoLOC_DF_00140 = Not Now
#autoLOC_DF_00141 = Don't switch vessel now
#autoLOC_DF_00142 = Automatic Switch to vessel failed.\nPlease switch manually to vessel Immediately
#autoLOC_DF_00143 = Switch to DeepFreeze vessel required
#autoLOC_DF_00144 = DeepFreeze Options
#autoLOC_DF_00145 = ElectricCharge Required to run Freezers
#autoLOC_DF_00146 = If on, EC is required to run freezers
#autoLOC_DF_00147 = Fatal EC/Heat Option
#autoLOC_DF_00148 = If on Kerbals will die if EC runs out or it gets too hot
#autoLOC_DF_00149 = Non Fatal Comatose Time(in secs)
#autoLOC_DF_00150 = The time in seconds a kerbal is comatose\n if fatal EC / Heat option is off
#autoLOC_DF_00151 = AutoRecover Frozen Kerbals at KSC
#autoLOC_DF_00152 = If on, will AutoRecover Frozen Kerbals at the KSC\n and deduct the Cost from your funds
#autoLOC_DF_00153 = Cost to Thaw a Kerbal at KSC
#autoLOC_DF_00154 = Amt of currency Reqd to Freeze a Kerbal from the KSC
#autoLOC_DF_00155 = EC Reqd to Freeze/Thaw a Kerbal
#autoLOC_DF_00156 = Amt of ElecCharge Reqd to Freeze/Thaw a Kerbal.
#autoLOC_DF_00157 = Glykerol Reqd to Freeze a Kerbal
#autoLOC_DF_00158 = Amt of Glykerol used to Freeze a Kerbal,\nOverrides Part values.
#autoLOC_DF_00159 = DeepFreeze Temperatures
#autoLOC_DF_00160 = Get your calculator out.
#autoLOC_DF_00161 = Temps are in (K)elvin. (K) = (C)elcius + 273.15. (K) = ((F)arenheit + 459.67) × 5/9. Get your calculator out
#autoLOC_DF_00162 = Regulated Temperatures Required
#autoLOC_DF_00163 = If on, Regulated Temps apply to freeze\nand keep Kerbals Frozen.
#autoLOC_DF_00164 = Min. Temp. for Freezer to Freeze(K)
#autoLOC_DF_00165 = The minimum temperature (in Kelvin) for a Freezer\nto be able to Freeze a Kerbal.
#autoLOC_DF_00166 = Max. Temp. to keep Kerbals Frozen(K)
#autoLOC_DF_00167 = The maximum temperature (in Kelvin) for a Freezer\nto keep Kerbals frozen.
#autoLOC_DF_00168 = Heat generated per kerbal (kW/min)
#autoLOC_DF_00169 = Amount of thermal heat (kW) generated\nby equipment for each frozen kerbal per minute.
#autoLOC_DF_00170 = Heat generated freezer process(kW)
#autoLOC_DF_00171 = Amount of thermal heat (kW) generated\nwith each thaw/freeze process.
#autoLOC_DF_00172 = Show Part Temperatures in Kelvin
#autoLOC_DF_00173 = If on Part right click will show temp in Kelvin,\nif Off will show in Celcius.
#autoLOC_DF_00174 = DeepFreeze Misc.
#autoLOC_DF_00175 = Freezer Strip Lights On
#autoLOC_DF_00176 = Turn off if you do not want the internal\nfreezer strip lights to function.
#autoLOC_DF_00177 = ToolTips On
#autoLOC_DF_00178 = Turn the Tooltips on and off.
#autoLOC_DF_00179 = Editor Filter
#autoLOC_DF_00180 = Turn the DeepFreeze Editor filter Category on and off.
#autoLOC_DF_00181 = Use Stock App Launcher Icon
#autoLOC_DF_00182 = If on, the Stock Application launcher will be used,\nif off will use Blizzy Toolbar if installed.
#autoLOC_DF_00183 = Extra Debug Logging
#autoLOC_DF_00184 = Turn this On to capture lots of extra information\ninto the KSP log for reporting a problem.
#autoLOC_DF_00185 = CRY-0300 Cryonic Freezing Chamber
#autoLOC_DF_00186 = REPOSoftTech
#autoLOC_DF_00187 = Designed for long term storage of 1 kerbal. The CRY-0300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300 comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00188 = deepfreeze cryogenic freezer
#autoLOC_DF_00189 = CRY-0300R Cryonic Freezing Chamber
#autoLOC_DF_00190 = Designed for long term storage of 1 kerbal. The CRY-0300R uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-0300R comes stocked with 10 units of Glykerol. CAUTION: The CRY-0300R also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00191 = CRY-1300 Cryonic Freezing Chamber
#autoLOC_DF_00192 = Designed for long term storage of up to 3 Kerbals. The CRY-1300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-1300 comes stocked with 15 units of Glykerol. CAUTION: The CRY-1300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00193 = CRY-2300 Cryonic Freezing Chamber
#autoLOC_DF_00194 = Designed for long term storage of up to 10 Kerbals. The CRY-2300 uses Glykerol and ElectricCharge to freeze or thaw one Kerbal. Please ensure you have enough ElectricCharge capacity on your ship. The CRY-2300 comes stocked with 50 units of Glykerol. CAUTION: The CRY-2300 also requires ElectricCharge per minute per Kerbal to keep it's Monitoring Systems Functioning. If it cannot get this ElectricCharge there is a risk of frozen Kerbals dying.
#autoLOC_DF_00195 = RS-X20R Glykerol Container
#autoLOC_DF_00196 = The RS-X20R is a small-volume Radial Glykerol container, for all your Kerbal Freezing and Thawing needs. Brought to you by the good folks at REPOSoftTech. Warranty void if filled with Glykerol.
#autoLOC_DF_00197 = deepfreeze cryogenic freezer glykerol tank
#autoLOC_DF_00198 = Experts in the field of cryogenics, ergonomics and electrical equipment, the kerbals at REPOSoftTech are trying hard to keep all space fairing kerbals alive and their missions successful.
#autoLOC_DF_00199 = Freeze <<1>>
#autoLOC_DF_00200 = Thaw <<1>>
}
}