Pictures / Videos
- ESP8266 with 32Mbit of flash memory
- MPU-9250 gyroscope, accelerometer with integrated AK8963 magnetometer
- RV-3029-C2 Real Time Clock
- FT232RQ for USB communication
- SSD1306 OLED Display, 128x64
- 3 Hardware Buttons
- MCP73831 LiPo charger
- 250mAh LiPo battery
- Dimensions: 35 * 39 * 11mm
- WiFi with chip antenna
- Vibration Motor
board/v1/README.md for a detailed parts list.
The firmwares in
firmwares use the esp-open-sdk. You may need to customize the
main.c files to reflect your WiFi configuration. This is mainly a hardware project and not a software project, so the firmwares are primarily meant to be demos for the hardware features of the watch. Firmwares can be uploaded using esptool and debugging is possible with a serial port terminal like espterm.
libesphttpd(used in the minetest firmware) was written by Spritetm and contributors and is licensed under "THE BEER-WARE LICENSE".
httpclient.h(included in all firmwares) was written by Caerbannog and contributors and is licensed under "THE BEER-WARE LICENSE".
i2c_master.cwas written by Espressif Systems
The hardware design (schematic, PCB design, footprints, ...) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC-BY-NC-SA).
The firmware source code is licensed under the MIT License.