[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.30 (wilson@vmub) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.2.0 r26351-705d7fcae5) 13.2.0, GNU ld (GNU Binutils) 2.42) #0 SMP PREEMPT Tue May 14 15:00:33 2024 [ 0.000000] Machine model: JDCloud AX1800 Pro [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004e1fffff (56320 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] OF: reserved mem: 0x0000000050000000..0x00000000500fffff (1024 KiB) nomap non-reusable q6_etr_dump@1 [ 0.000000] OF: reserved mem: 0x0000000050100000..0x00000000501fffff (1024 KiB) nomap non-reusable m3_dump@50100000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a0fffff] [ 0.000000] node 0: [mem 0x000000004a100000-0x000000004a4fffff] [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e1fffff] [ 0.000000] node 0: [mem 0x000000004e200000-0x000000004fffffff] [ 0.000000] node 0: [mem 0x0000000050000000-0x00000000501fffff] [ 0.000000] node 0: [mem 0x0000000050200000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 19 pages/cpu s37032 r8192 d32600 u77824 [ 0.000000] pcpu-alloc: s37032 r8192 d32600 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=d62092a4-7de3-b03e-a35f-d3f56a3d5ca3 gpt rootwait rootfstype=squashfs,ext4 swiotlb=1 coherent_pool=2M [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 415212K/524288K available (8256K kernel code, 944K rwdata, 2464K rodata, 1600K init, 306K bss, 109076K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000076] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.000089] pid_max: default: 32768 minimum: 301 [ 0.005542] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005556] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.010152] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.010261] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.010480] rcu: Hierarchical SRCU implementation. [ 0.010485] rcu: Max phase no-delay instances is 400. [ 0.011314] smp: Bringing up secondary CPUs ... [ 0.012020] Detected VIPT I-cache on CPU1 [ 0.012125] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.012888] Detected VIPT I-cache on CPU2 [ 0.012961] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.013683] Detected VIPT I-cache on CPU3 [ 0.013752] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.013833] smp: Brought up 1 node, 4 CPUs [ 0.013842] SMP: Total of 4 processors activated. [ 0.013848] CPU features: detected: 32-bit EL0 Support [ 0.013852] CPU features: detected: CRC32 instructions [ 0.013923] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.013931] CPU: All CPU(s) started at EL1 [ 0.013934] alternatives: applying system-wide alternatives [ 0.022878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.022902] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.024705] pinctrl core: initialized pinctrl subsystem [ 0.026849] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027786] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.028101] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.028425] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.028843] thermal_sys: Registered thermal governor 'step_wise' [ 0.028920] cpuidle: using governor menu [ 0.029192] ASID allocator initialised with 65536 entries [ 0.089812] Modules: 29344 pages in range for non-PLT usage [ 0.089826] Modules: 520864 pages in range for PLT usage [ 0.091434] cryptd: max_cpu_qlen set to 1000 [ 0.095439] SCSI subsystem initialized [ 0.095645] usbcore: registered new interface driver usbfs [ 0.095681] usbcore: registered new interface driver hub [ 0.095721] usbcore: registered new device driver usb [ 0.096065] qcom_scm: convention: smc arm 64 [ 0.097685] clocksource: Switched to clocksource arch_sys_counter [ 0.101837] NET: Registered PF_INET protocol family [ 0.101979] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.104224] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.104244] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.104261] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.104351] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.104496] TCP: Hash tables configured (established 4096 bind 4096) [ 0.104593] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.104618] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.104953] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.104991] PCI: CLS 0 bytes, default 64 [ 0.107184] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.107755] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.107763] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.162071] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.162236] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.164142] qcom-qusb2-phy 59000.qusb: supply vdd not found, using dummy regulator [ 0.164331] qcom-qusb2-phy 59000.qusb: supply vdda-pll not found, using dummy regulator [ 0.164377] qcom-qusb2-phy 59000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.164583] qcom-qusb2-phy 59000.qusb: Registered Qcom-QUSB2 phy [ 0.164915] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regulator [ 0.165043] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.165108] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.165330] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.175461] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.176667] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.176754] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.177152] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 21, base_baud = 115199) is a MSM [ 0.177190] msm_serial: console setup on port #0 [ 0.177284] printk: console [ttyMSM0] enabled [ 1.003748] msm_serial: driver initialized [ 1.013434] loop: module loaded [ 1.014851] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.016454] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 1.038953] i2c_dev: i2c /dev entries driver [ 1.044406] sdhci: Secure Digital Host Controller Interface driver [ 1.044448] sdhci: Copyright(c) Pierre Ossman [ 1.049501] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.055370] mmc0: CQHCI version 5.10 [ 1.057450] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.066634] NET: Registered PF_INET6 protocol family [ 1.070305] Segment Routing with IPv6 [ 1.074257] In-situ OAM (IOAM) with IPv6 [ 1.077781] NET: Registered PF_PACKET protocol family [ 1.081744] Bridge firewalling registered [ 1.086806] l2tp_core: L2TP core driver, V2.0 [ 1.089692] mmc0: SDHCI controller on 7804000.mmc [7804000.mmc] using ADMA 64-bit [ 1.090643] l2tp_netlink: L2TP netlink interface [ 1.095033] sdhci_msm 7804000.mmc: mmc0: CQE init: success [ 1.102477] 8021q: 802.1Q VLAN Support v1.8 [ 1.153519] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 1.155968] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.163832] clk: Disabling unused clocks [ 1.170018] Waiting for root device PARTUUID=d62092a4-7de3-b03e-a35f-d3f56a3d5ca3... [ 1.228536] mmc0: Command Queue Engine enabled [ 1.228570] mmc0: new HS200 MMC card at address 0001 [ 1.232448] mmcblk0: mmc0:0001 SLD128 115 GiB [ 1.265367] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [ 1.267491] mmcblk0boot0: mmc0:0001 SLD128 4.00 MiB [ 1.273901] mmcblk0boot1: mmc0:0001 SLD128 4.00 MiB [ 1.278251] mmcblk0rpmb: mmc0:0001 SLD128 4.00 MiB, chardev (247:0) [ 1.287167] VFS: Mounted root (squashfs filesystem) readonly on device 179:17. [ 1.289743] Freeing unused kernel memory: 1600K [ 1.296426] Run /sbin/init as init process [ 1.300647] with arguments: [ 1.300650] /sbin/init [ 1.300654] with environment: [ 1.300657] HOME=/ [ 1.300661] TERM=linux [ 1.479134] init: Console is alive [ 1.479297] init: - watchdog - [ 2.558078] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 2.605254] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 2.651383] ssdk_dt_parse_interrupt[934]:INFO:intr-gpio does not exist [ 2.970146] regi_init[2525]:INFO:Initializing CPPE Done!! [ 2.970278] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 2.977009] EDMA ver 1 hw init [ 2.980865] EDMA HW Reset completed succesfully [ 2.983516] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 2.987905] RxDesc:1 (15-15) RxFill:1 (7-7) [ 2.993886] dp2: ppe offload disabled: 0 for macid 2 [ 2.997580] dp2: Switch attached to macid 2 status: 0 [ 3.163525] dp3: ppe offload disabled: 0 for macid 3 [ 3.163560] dp3: Switch attached to macid 3 status: 0 [ 3.222078] dp4: ppe offload disabled: 0 for macid 4 [ 3.222112] dp4: Switch attached to macid 4 status: 0 [ 3.280053] dp5: ppe offload disabled: 0 for macid 5 [ 3.280088] dp5: Switch attached to macid 5 status: 0 [ 3.302026] ********************************************************** [ 3.302066] * NSS Data Plane driver [ 3.307460] ********************************************************** [ 3.329346] phy phy-59000.qusb.1: QUSB2PHY pll lock failed: status reg = 10 [ 3.329397] phy phy-59000.qusb.1: phy init failed --> -16 [ 3.335155] dwc3 7000000.usb: error -EBUSY: failed to initialize core [ 3.340695] dwc3: probe of 7000000.usb failed with error -16 [ 3.356232] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.356290] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 3.361534] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 3.368269] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000 [ 3.377718] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.383471] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 3.389018] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.397027] hub 1-0:1.0: USB hub found [ 3.403181] hub 1-0:1.0: 1 port detected [ 3.407245] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.411407] hub 2-0:1.0: USB hub found [ 3.419071] hub 2-0:1.0: 1 port detected [ 3.427821] usbcore: registered new interface driver usb-storage [ 3.429126] usbcore: registered new interface driver uas [ 3.433315] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.446150] init: - preinit - [ 4.374693] random: crng init done [ 6.751444] mount_root: loading kmods from internal overlay [ 6.770177] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 6.774337] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 7.020121] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 7.020220] block: unable to load configuration (fstab: Entry not found) [ 7.025944] block: attempting to load /tmp/overlay/etc/config/fstab [ 7.032724] block: unable to load configuration (fstab: Entry not found) [ 7.038706] block: attempting to load /etc/config/fstab [ 7.046975] block: unable to load configuration (fstab: Entry not found) [ 7.050578] block: no usable configuration [ 7.057666] block: attempting to load /etc/config/fstab [ 7.061442] block: unable to load configuration (fstab: Entry not found) [ 7.066549] block: no usable configuration [ 7.074276] loop0: detected capacity change from 0 to 614400 [ 7.082691] loop0: detected capacity change from 614400 to 527616 [ 7.174694] F2FS-fs (loop0): Disable nat_bits due to incorrect cp_ver (17938611604081204398, 0) [ 7.180744] F2FS-fs (loop0): Mounted with checkpoint version = 8f5dcae [ 7.182663] mount_root: loading kmods from internal overlay [ 7.206089] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 7.206472] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 7.387725] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 7.388250] block: extroot: not configured [ 7.393663] block: attempting to load /etc/config/fstab [ 7.397555] block: unable to load configuration (fstab: Entry not found) [ 7.402643] block: no usable configuration [ 7.410565] mount_root: switching to f2fs overlay [ 7.417531] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 7.420204] urandom-seed: Seeding with /etc/urandom.seed [ 7.465291] procd: - early - [ 7.465399] procd: - watchdog - [ 8.014285] procd: - watchdog - [ 8.014759] procd: - ubus - [ 8.076829] procd: - init - [ 8.483338] kmodloader: loading kernel modules from /etc/modules.d/* [ 8.507836] tun: Universal TUN/TAP device driver, 1.6 [ 8.628964] NSS DDR size is 0x1000000 [ 8.628999] ffffffc079116940: NSS core 0 DDR from 40000000 to 41000000 [ 8.640154] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.643532] urngd: v1.0.2 started. [ 8.645280] nat46: module (version 1182f30785e4274913f01a8c3d7e1b5437ae3819) loaded. [ 8.651119] gre: GRE over IPv4 demultiplexor driver [ 8.657851] ip_gre: GRE over IPv4 tunneling driver [ 8.662136] NSS DDR size is 0x1000000 [ 8.665772] ffffffc079116940: nss core 0 booted successfully [ 8.665964] ip6_gre: GRE over IPv6 tunneling driver [ 8.683297] QCA multicast snooping installed successfully [ 8.726983] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 8.726983] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang [ 8.729938] nss_vlan_mgr_init_module[1902]:Module (Build Build Id: 05/17/24, 05:45:18) loaded [ 8.747441] PPP generic driver version 2.4.2 [ 8.764874] NET: Registered PF_PPPOX protocol family [ 8.769756] PPTP driver version 0.8.5 [ 8.790494] :module loaded Build_ID - 05/17/24, 05:42:10 SoC=ipq60xx [ 8.799768] GACT probability on [ 8.801061] Mirror/redirect action on [ 8.810296] u32 classifier [ 8.810328] input device check on [ 8.811908] Actions configured [ 8.835579] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 [ 8.835621] Backport generated by backports.git 193becf2 [ 8.850543] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 8.892638] NET: Registered PF_QIPCRTR protocol family [ 8.897071] usbcore: registered new interface driver ums-alauda [ 8.899603] usbcore: registered new interface driver ums-cypress [ 8.903992] usbcore: registered new interface driver ums-datafab [ 8.910081] usbcore: registered new interface driver ums-freecom [ 8.916231] usbcore: registered new interface driver ums-isd200 [ 8.922412] usbcore: registered new interface driver ums-jumpshot [ 8.927794] usbcore: registered new interface driver ums-karma [ 8.928159] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha1),cbc(aes))) [ 8.938407] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha256),cbc(aes))) [ 8.938752] usbcore: registered new interface driver ums-sddr09 [ 8.949044] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha384),cbc(aes))) [ 8.965365] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha512),cbc(aes))) [ 8.965692] usbcore: registered new interface driver ums-sddr55 [ 8.976120] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha1),cbc(des3_ede))) [ 8.992623] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(authenc(hmac(sha256),cbc(des3_ede))) [ 8.992947] usbcore: registered new interface driver ums-usbat [ 9.003793] nss_cryptoapi_attach_user[2236]:ffffffc0793e2118: AEAD registration failed(seqiv(rfc4106(gcm(aes)))) [ 9.036035] xt_time: kernel timezone is -0000 [ 9.037470] usbcore: registered new interface driver cdc_ether [ 9.079440] usbcore: registered new interface driver rndis_host [ 9.093886] ath11k c000000.wifi: ipq6018 hw1.0 [ 9.093924] ath11k c000000.wifi: FW memory mode: 1 [ 9.097589] remoteproc remoteproc0: powering up cd00000.remoteproc [ 9.118258] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 10.034003] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 10.035314] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 10.036848] kmodloader: done loading kernel modules from /etc/modules.d/* [ 10.041043] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 10.053473] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 15.069113] br-lan: port 1(eth0) entered blocking state [ 15.069176] br-lan: port 1(eth0) entered disabled state [ 15.073445] nss-dp 3a001200.dp2 eth0: entered allmulticast mode [ 15.078900] nss-dp 3a001200.dp2 eth0: entered promiscuous mode [ 15.093954] br-lan: port 2(eth1) entered blocking state [ 15.093998] br-lan: port 2(eth1) entered disabled state [ 15.098123] nss-dp 3a001400.dp3 eth1: entered allmulticast mode [ 15.103959] nss-dp 3a001400.dp3 eth1: entered promiscuous mode [ 15.116357] br-lan: port 3(eth2) entered blocking state [ 15.116407] br-lan: port 3(eth2) entered disabled state [ 15.120587] nss-dp 3a001600.dp4 eth2: entered allmulticast mode [ 15.126180] nss-dp 3a001600.dp4 eth2: entered promiscuous mode [ 15.316846] ECM init [ 15.316937] ECM database jhash random seed: 0x6128d446 [ 15.346131] ECM init complete [ 16.589965] br-lan: port 4(phy1-ap0) entered blocking state [ 16.590027] br-lan: port 4(phy1-ap0) entered disabled state [ 16.595632] ath11k c000000.wifi phy1-ap0: entered allmulticast mode [ 16.601164] ath11k c000000.wifi phy1-ap0: entered promiscuous mode [ 16.677408] ath11k c000000.wifi phy1-ap0: left allmulticast mode [ 16.677469] ath11k c000000.wifi phy1-ap0: left promiscuous mode [ 16.682850] br-lan: port 4(phy1-ap0) entered disabled state [ 16.700099] br-lan: port 4(phy1-ap0) entered blocking state [ 16.700170] br-lan: port 4(phy1-ap0) entered disabled state [ 16.704751] ath11k c000000.wifi phy1-ap0: entered allmulticast mode [ 16.710826] ath11k c000000.wifi phy1-ap0: entered promiscuous mode [ 16.718361] br-lan: port 4(phy1-ap0) entered blocking state [ 16.722587] br-lan: port 4(phy1-ap0) entered forwarding state [ 16.946195] br-lan: port 5(phy0-ap0) entered blocking state [ 16.946240] br-lan: port 5(phy0-ap0) entered disabled state [ 16.950755] ath11k c000000.wifi phy0-ap0: entered allmulticast mode [ 16.956508] ath11k c000000.wifi phy0-ap0: entered promiscuous mode [ 16.962645] br-lan: port 5(phy0-ap0) entered blocking state [ 16.968690] br-lan: port 5(phy0-ap0) entered forwarding state [ 18.145998] nss-dp 3a001400.dp3 eth1: PHY Link up speed: 1000 [ 18.146100] br-lan: port 2(eth1) entered blocking state [ 18.150771] br-lan: port 2(eth1) entered forwarding state [ 18.210208] nss-dp 3a001800.dp5 eth3: PHY Link up speed: 1000 [ 18.977821] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 19.086768] _adpt_hppe_port_interface_mode_apply[2739]:ERROR:config instance0, rv:fffffffc faild