diff --git a/docs/information/connecting_cc2530.md b/docs/information/connecting_cc2530.md
index e548dc1dcf95..31f1f60052ec 100755
--- a/docs/information/connecting_cc2530.md
+++ b/docs/information/connecting_cc2530.md
@@ -141,148 +141,13 @@ j.    Event processing: Generic
 
 Press Submit, the setup is now completed.
 
-### Mounting the serialport
-The following instructions need to be executed on the computer that Zigbee2mqtt is running on.
-
-```bash
-# Install soccat
-sudo apt-get install -y socat
-
-# Create directory for mount point
-sudo mkdir /opt/zigbee2mqtt/vusb/
-
-# Give pi user owner rights to /opt/zigbee2mqtt/vusb/
-sudo chown -R pi:pi /opt/zigbee2mqtt/vusb/
-```
-
-### Comfirm that the connection works
-Change the `IP` and `PORT` and execute:
-
-```bash
-socat -d -d pty,raw,echo=0,link=/opt/zigbee2mqtt/vusb/zigbee_cc2530 tcp-connect:IP:PORT
-```
-or
-
-```bash
-socat -d -d pty,raw,b115200,echo=0,link=/opt/zigbee2mqtt/vusb/zigbee_cc2530 tcp:127.0.0.1:1775
-```
-
-### Mounting the serialport on boot
-```bash
-sudo nano /etc/systemd/system/socat-vusb.service
-```
-
-Add the following to this file (make sure to change the `IP` and `PORT`)
-
-```bash
-[Unit]
-Description=socat-vusb
-After=network-online.target
-
-[Service]
-User=pi
-ExecStart=/usr/bin/socat -d -d pty,raw,echo=0,link=/opt/zigbee2mqtt/vusb/zigbee_cc2530 tcp:IP:PORT,reuseaddr
-Restart=always
-RestartSec=10
-
-[Install]
-WantedBy=multi-user.target
-```
-Save the file and exit.
-
-Update systemd:
-
-```bash
-sudo systemctl --system daemon-reload
-```
-
-Verify that the configuration works:
-```bash
-sudo systemctl start socat-vusb.service
- ```
-
-Show status
-```bash
-systemctl status socat-vusb.service
-```
-
-In case you run Zigbee2mqtt as daemon, replace the contents of `sudo nano /etc/systemd/system/zigbee2mqtt.service` with below:
-
-```
-[Unit]
-Description=zigbee2mqtt
-Wants=socat-vusb.service
-After=network.target socat-vusb.service
-
-[Service]
-ExecStart=/usr/bin/npm start
-WorkingDirectory=/opt/zigbee2mqtt
-StandardOutput=inherit
-StandardError=inherit
-Restart=always
-User=pi
-
-[Install]
-WantedBy=multi-user.target
-```
-
-### Restart and check Log
-```bash
-sudo systemctl restart socat-vusb.service && sudo journalctl -f -u socat-vusb.service
-```
-
-Now that everything works, we want systemctl to start socat-vusb automatically on boot, this can be done by executing:
-
-```bash
-sudo systemctl enable socat-vusb.service
-```
-
-### Some tips that can be handy later:
-Stopping socat-vusb
-```bash
-sudo systemctl stop socat-vusb
-```
-
-Starting socat-vusb
-```bash
-sudo systemctl start socat-vusb
-```
-
-### View the log of socat-vusb
-```bash
-sudo journalctl -u socat-vusb.service -f
-
-Output should look like:
-```bash
-pi@hassbian:~ $ systemctl status socat-vusb.service
-● socat-vusb.service - socat-vusb
-   Loaded: loaded (/etc/systemd/system/socat-vusb.service; enabled; vendor preset: enabled)
-   Active: active (running) since Fri 2019-02-01 15:35:24 UTC; 4min 11s ago
- Main PID: 1406 (socat)
-   CGroup: /system.slice/socat-vusb.service
-           └─1406 /usr/bin/socat -d -d pty,raw,b115200,echo=0,link=/opt/zigbee2mqtt/vusb/zigbee_cc2530 tcp:127.0.0.1:1775,reuseaddr
-
-Feb 01 15:35:24 hassbian systemd[1]: Started socat-vusb.
-Feb 01 15:35:24 hassbian socat[1406]: 2019/02/01 15:35:24 socat[1406] N PTY is /dev/pts/3
-Feb 01 15:35:24 hassbian socat[1406]: 2019/02/01 15:35:24 socat[1406] N opening connection to AF=2 127.0.0.1:1775
-Feb 01 15:35:24 hassbian socat[1406]: 2019/02/01 15:35:24 socat[1406] N successfully connected from local address AF=2 127.0.0.1:47512
-Feb 01 15:35:24 hassbian socat[1406]: 2019/02/01 15:35:24 socat[1406] N starting data transfer loop with FDs [5,5] and [7,7]
-```
-
-### Adding virtual device to zigbee2mqtt config
-```bash
-sudo nano  /opt/zigbee2mqtt/data/configuration.yaml
-```
+### Zigbee2mqtt configuration
+Now add the following to the Zigbee2mqtt `configuration.yaml`:
 
 ```yaml
 serial:
-  port: /opt/zigbee2mqtt/vusb/zigbee_cc2530
-
-advanced:
-  rtscts: false
+    port: 'tcp://192.168.2.13:20108'
 ```
 
-### Restart zigbee2mqtt and confirm it works.
-```bash
-sudo systemctl restart zigbee2mqtt.service && sudo journalctl -f -u zigbee2mqtt.service
-```
+Note to change the IP address and port.
+You can now start Zigbee2qmtt.